VIA Technologies P4XB-S Manuel utilisateur

VIA Mainboard

User’s Manual

VIA P4XB-S &

VIA P4XB-R

Version 1.3 - November 13, 2001

be reproduced or transmitted in any form without express written

authorization from VIA.

Trademarks

All trademarks are the property of their respective holders.

Data protection

All data should be backed-up prior to the installation of any drive unit or

storage peripheral. VIA will not be responsible for any loss of data resulting

from the use, disuse or misuse of this or any other VIA product.

NoWarranty

VIA has made every effort to ensure the accuracy of the content of this

manual. However, it is possible that it may contain technical inaccuracies

or typographical or other errors. VIA will assume no liability for any

inaccuracy found in this publication, nor for damages, direct, indirect,

incidental, consequential or otherwise, that may result from such an

inaccuracy, including without limitation loss of data or profits.

VIA provides this manual “as is”, and does not issue a warranty of any

kind, express or implied, including without limitation implied warranties of

merchantability or fitness for a particular purpose.

The information provided in this manual is subject to change without

notice. VIA reserves the right to alter product designs, layouts or drivers

without notification.

iii

FCC-BRadioFrequencyInterferenceStatement

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference when the equip-

ment is operated in a commercial environment. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference, in which case the user will be required to correct

the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party respon-

sible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to

comply with the emission limits.

TRADEMARKS

All trademarks used in this manual are the property of their respective owners.

Intel and Pentium are registered trademarks of Intel Corporation.

PS/2 and OS/2 are registered trademarks of IBM Corporation.

Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.

Netware is a registered trademark of Novell.

Award is a registered trademark of Award Software Inc.

NOTE

1. Always read the safety instructions carefully.

2. Keep this User’s Manual for future reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection and protect the

equipmentfrom overheating. DONOT COVERTHE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

7. Place the power cord such a way that people cannot step on it. Do not

place anything over the power cord.

8. Always Unplug thePower Cord beforeinserting any add-oncard ormodule.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening. Doing so could cause damage or

electrical shock.

11. If any of the following situations arises, get the equipment checked by a

service personnel:

The power cord or plug is damaged

Liquid has penetrated into the equipment

The equipment has been exposed to moisture

The equipment does not work well or does not work according to the

User’s Manual.

The equipment has dropped or damaged

The equipment has been visably damaged

12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED,STORAGETEMPERATUREABOVE600C(1400F),IT

MAYDAMAGETHEEQUIPMENT.

Box Contents

•1 x VIA Mainboard

•1 x User’s manual

•1 x Floppy ribbon cable

•1 x ATA-66/100 Hard drive ribbon cable (2 are included

with the VIA P4XB-R)

•1 x 2 Port USB Module

•1 x Driver Utilities CD

•1 x User’s Manual for Promise FastTrak 100-Lite

RAID Controller (with VIA P4XB-R only)

Contents

Chapter 1. Specifications....................1-1

Specifications ................................................................1-2

Layout............................................................................1-4

Components Guide ........................................................ 1-5

Chapter 2. Installation........................2-7

CPU Installation............................................................. 2-8

CPU Installation......................................................................... 2-8

CPU Core Speed....................................................................... 2-9

CPU Fan Installation ................................................................. 2-9

Memory Installation .................................................... 2-11

DDR Module Installation ......................................................... 2-13

Power Supply...............................................................2-13

ATX 20-Pin Power Connector: JWR1 .................................... 2-13

ATX 12V Power Connector: JPW1 ........................................ 2-13

Back Panel ...................................................................2-14

Mouse Connector: JKBMS1 ................................................... 2-15

Keyboard Connector: JKBMS1............................................... 2-15

USB Connectors...................................................................... 2-15

Parallel Port Connector: LPT1 ................................................ 2-15

Serial Port Connectors: COM A & COM B ........................... 2-17

Joystick (MIDI) Connector ..................................................... 2-17

Audio Port Connectors ............................................................ 2-17

Connectors ..................................................................2-17

Floppy Disk Drive Connector: FDD1 ...................................... 2-17

IrDA Infrared Module Connector: IR1 ................................... 2-17

Hard Disk Connectors: IDE1 & IDE2 .................................... 2-19

CD-In Connector: J3 ............................................................... 2-19

Aux Line-In Connector: J4 ...................................................... 2-19

vii

Modem-In Connector: J5 ......................................................... 2-19

Fan Power Connectors: CFAN2/SFAN1 ................................ 2-20

Case Connectors: JFP1/JFP2 .................................................. 2-21

Front Panel Audio Connector: JAUD...................................... 2-22

Wake On Ring Connector: JMDM1 ........................................ 2-23

Power Saving Switch Connector: JGS1................................... 2-23

USB Front Connector: USB3/USB4 ....................................... 2-24

Jumpers .......................................................................2-25

Clear CMOS Jumper: J7 ......................................................... 2-25

Onboard Audio Codec Jumper: JP1 ........................................ 2-26

Slots .............................................................................2-27

AGP (Accelerated Graphics Port) Slot ................................... 2-27

PCI Slots.................................................................................. 2-27

CNR (Communication Network Riser) ................................... 2-27

PCI Interrupt Request Routing ................................................ 2-28

Chapter 3. BIOS Setup .....................3-29

Entering Setup.............................................................3-30

Control Keys ................................................................3-30

Getting Help ................................................................3-31

The Main Menu............................................................3-32

Standard CMOS Features ...........................................3-34

Advanced BIOS Features.............................................3-36

Advanced Chipset Features.........................................3-39

Integrated Peripherals................................................3-44

Power Management Setup ..........................................3-50

PNP/PCI Configurations .............................................3-54

PC Health Status .........................................................3-56

Frequency/Voltage Control .........................................3-57

Load High Performance Defaults ...............................3-59

viii

Load Optimized Defaults.............................................3-60

Set Supervisor/User Password....................................3-61

Save & Exit Setup........................................................3-63

Exit Without Saving.....................................................3-64

Chapter 4. Driver Setup....................4-65

VIA Apollo P4X266 Chipset Drivers ...........................4-66

C-Media CMI8738 Audio Driver (P4XB-R only) ........4-71

Realtek ALC201A Audio Driver (P4XB-S only) ..........4-73

Specifications

1-1

Chapter 1. Specifications

Specifications

The VIA P4XB-R and P4XB-S mainboards are

based around the VIA Apollo P4X266 chipset, which

bringssupportfor high-performance DDR266SDRAM

to the Intel®Pentium® 4 platform. VIA’s advanced V-

Link controller brings optimal system efficiency by ef-

fectively doubling bandwidth between the chipset’s

north and south bridges. Designed for the latest 478-

pinPentium®4processors, these ATX sizedmainboards

are the perfect choice for Pentium 4 based high- per-

formance PCs, servers and workstations.

This chapter includes the following sections:

Mainboard Specifications 1-2

Mainboard Layout 1-4

Components Guide 1-5

Chapter 1

1-2

CPU

•Supports Intel®Pentium®4 processors in the 478 pin package.

•Supports1.5GHz,1.6GHz,1.7GHz,1.8GHz,1.9GHz,2GHzandupwards.

Chipset

•VIAApolloP4X266chipset(VT8753&VT8233)

- Supports Intel®Pentium®4 processors with 400MHz (100MHz QDR) CPU

Front Side Bus (FSB).

- AGP v2.0 compliant with 8x transfer mode.

- High Bandwidth V-Link Client controller.

- Integrated Faster Ethernet LPC.

- Integrated Hardware Sound Blaster/Direct Sound AC’97 audio.

- Ultra DMA 33/66/100 master mode PCI EIDE controller.

- ACPI 1.0B and PCI Bus Power Management 1.1 compliant.

Main Memory

•3 x 184-pin DDR DIMM slots.

•Supportsup to 3GBof DDR266SDRAM (PC2100/PC1600).

•Supports 2.5v DDR266 SDRAM.

Slots

•1 x AGP (Accelerated Graphics Port) 4X slot.

•5 x PCI 2.2 32-bit PCI bus slots (supports 3.3v/5v PCI bus interface).

•1 x CNR (Communication Network Riser) slot.

OnboardIDE

•Integrated IDE controller provides IDE HDD/CD-ROM with PIO, Bus Mas-

ter and Ultra DMA 33/66/100 operation modes.

•Can connect up to four IDE devices.

•IDE RAID 0, 1 supported by Promise PDC20265R controller (VIA P4XB-R

only).

Specifications

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels VIA Technologies Carte mère

VIA Technologies

VIA Technologies CM30-SC Manuel utilisateur

VIA Technologies

VIA Technologies VB8004 Manuel utilisateur

VIA Technologies

VIA Technologies VB6002 Series Manuel utilisateur

VIA Technologies

VIA Technologies VAB-630 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-EN12000EG - VIA Motherboard - Mini ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M850 Manuel utilisateur

VIA Technologies

VIA Technologies COMe-8X90 Manuel utilisateur

VIA Technologies

VIA Technologies VB7009 Manuel utilisateur

VIA Technologies

VIA Technologies VX900 Manuel utilisateur

VIA Technologies

VIA Technologies EPIA LN-Series Manuel utilisateur

VIA Technologies

VIA Technologies VIA P4XB-SA Manuel utilisateur

VIA Technologies

VIA Technologies VIA KT266A ChipsetMotherboard Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-N Manuel utilisateur

VIA Technologies

VIA Technologies Mini-ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P910 Manuel utilisateur

VIA Technologies

VIA Technologies VT82C691 Manuel d'utilisation et d'entretien

VIA Technologies

VIA Technologies EPIA-NX15000G - VIA Motherboard - Nano ITX Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-M850 Manuel utilisateur

VIA Technologies

VIA Technologies VB8001 Manuel utilisateur

VIA Technologies

VIA Technologies P4PA Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-PE Manuel utilisateur

VIA Technologies

VIA Technologies A7F129 Manuel utilisateur

VIA Technologies

VIA Technologies VIA P4PB 266E Manuel utilisateur

VIA Technologies

VIA Technologies VAB-950 Guide de sécurité

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur