VIA Technologies ARTiGO A600 Manuel utilisateur

0.10-09242015-175600

USER MANUAL

ARTiGO A600

Fanless Ultra- ompa t System

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

No part of this do ument may be reprodu ed, transmitted, trans ribed, stored in a retrieval system, or translated into any language,

in any form or by any means, ele troni , me hani al, magneti , opti al, hemi al, manual or otherwise without the prior written

permission of VIA Te hnologies, In orporated.

Trademarks

All trademarks are the property of their respe tive holders.

Dis laimer

No li ense is granted, implied or otherwise, under any patent or patent rights of VIA Te hnologies. VIA Te hnologies makes no

warranties, implied or otherwise, in regard to this do ument and to the produ ts des ribed in this do ument. The information

provided in this do ument is believed to be a urate and reliable as of the publi ation date of this do ument. However, VIA

Te hnologies assumes no responsibility for the use or misuse of the information (in luding use or onne tion of extra

devi e/equipment/add-on ard) in this do ument and for any patent infringements that may arise from the use of this do ument.

The information and produ t spe ifi ations within this do ument are subje t to hange at any time, without noti e and without

obligation to notify any person of su h hange.

VIA Te hnologies, In . reserves the right the make hanges to the produ ts des ribed in this manual at any time without prior

noti e.

Regulatory Complian e

FCC

FCCFCC

FCC-

-A Radio

A Radio A Radio

A Radio Frequen y Interferen e Statement

Frequen y Interferen e StatementFrequen y Interferen e Statement

Frequen y Interferen e Statement

This equipment has been tested and found to omply with the limits for a lass A digital devi e, pursuant to part 15 of the FCC

rules. These limits are designed to provide reasonable prote tion against harmful interferen e when the equipment is operated in a

ommer ial environment. This equipment generates, uses, and an radiate radio frequen y energy and, if not installed and used in

a ordan e with the instru tion manual, may ause harmful interferen e to radio ommuni ations. Operation of this equipment in a

residential area is likely to ause harmful interferen e, in whi h ase the user will be required to orre t the interferen e at his

personal expense.

Noti e 1

Noti e 1Noti e 1

Noti e 1

The hanges or modifi ations not expressly approved by the party responsible for omplian e ould void the user's authority to

operate the equipment.

Noti e 2

Noti e 2Noti e 2

Noti e 2

Shielded interfa e ables and A.C. power ord, if any, must be used in order to omply with the emission limits.

Noti e 3

Noti e 3Noti e 3

Noti e 3

The produ t des ribed in this do ument is designed for general use, VIA Te hnologies assumes no responsibility for the onfli ts

or damages arising from in ompatibility of the produ t. Che k ompatibility issue with your lo al sales representatives before

pla ing an order.

Battery Re y ling and Disposal



Only use the appropriate battery spe ified for this produ t.



Do not re-use, re harge, or reheat an old battery.



Do not attempt to for e open the battery.



Do not dis ard used batteries with regular trash.



Dis ard used batteries a ording to lo al regulations.

Safety Pre autions



Always read the safety instru tions arefully.



Keep this User's Manual for future referen e.



All autions and warnings on the equipment should be noted.



Keep this equipment away from humidity.



Lay this equipment on a reliable flat surfa e before setting it up.



Make sure the voltage of the power sour e and adjust properly 110/220V before onne ting

the equipment to the power inlet.



Pla e the power ord in su h a way that people annot step on it.



Always unplug the power ord before inserting any add-on ard or module.



If any of the following situations arises, get the equipment he ked by authorized servi e

personnel:



The power ord or plug is damaged.



Liquid has penetrated into the equipment.



The equipment has been exposed to moisture.



The equipment has not worked well or you annot get it work a ording to User's

Manual.



The equipment has dropped and damaged.



The equipment has obvious sign of breakage.



Do not leave this equipment in an environment un onditioned or in a storage temperature

above 75°C (167°F). The equipment may be damaged.



Never pour any liquid into the opening. Liquid an ause damage or ele tri al sho k.



Do not pla e anything over the power ord.



Do not over the ventilation holes. The openings on the en losure prote t the equipment

from overheating.

ARTiGO A600 User Manual

ARTiGO A600 User ManualARTiGO A600 User Manual

ARTiGO A600 User Manual

Box Contents

ATG

ATGATG

ATG-

-A600

A600A600

A600-

-3

3D10A1

D10A1D10A1

D10A1



1 x ARTiGO A600 system



1 x AC to DC Adapter



1 x Power ord (USA type)



1 x Debug COM able



1 x S rew pa k for Mini PCIe module installation



4 x Rubber foot

Ordering Information

Part Number

Part NumberPart Number

Part Number

Des ription

Des riptionDes ription

Des ription

ATG

ATGATG

ATG-

-A600

A600A600

A600-

-3

3D10A1

D10A1D10A1

D10A1 ARTiGO A600 system with Frees ale i.MX6 Dual Lite ARM Cortex-A9

Core 1.0GHz, 4GB eMMC Flash, 1GB DDR3 SDRAM, 3 x USB 2.0, 1 x

COM, 1 x DIO, 2 x LAN, 1 x HDMI, 1 x DC-In ja k, 1 x Mi ro SD ard

slot, and 1 x Mini PCIe slot

Optional A essories

Wireless A essories

Wireless A essoriesWireless A essories

Wireless A essories

Model Number

Model NumberModel Number

Model Number

Des ription

Des riptionDes ription

Des ription

EMIO-2550-00A1 Ublox 3.75G HSPA/UMTS mobile broadband full size mini PCIe

module with GPS and SIM ard slot

EMIO-2550-01A1 Ublox 3.75G HSPA/UMTS mobile broadband full size mini PCIe

module

ARTiGO A600 User Manual

ARTiGO A600 User ManualARTiGO A600 User Manual

ARTiGO A600 User Manual

Table of Contents

1.1.

Produ t Overview

Produ t OverviewProdu t Overview

Produ t Overview................................

................................................................

................................ 1

1.1.

Key Features................................................................................................... 1

1.1.1.

ARM Based System ................................................................................. 1

1.1.2.

Ultra Slim and Spa e Saving................................................................... 1

1.1.3.

Optimize Integration with Multiple I/O A ess............................... 1

1.1.4.

Storage Expansion................................................................................... 2

1.1.5.

Mounting Solution .................................................................................. 2

1.1.6.

Wide Range of Operating Temperatures........................................... 2

1.1.7.

Networking Support............................................................................... 2

1.1.8.

Embedded OS ready.............................................................................. 2

1.2.

Produ t Spe ifi ations................................................................................. 3

1.3.

Panel Layout .................................................................................................. 5

1.4.

Dimensions..................................................................................................... 6

2.2.

External I/O Pin Des riptions and Fun tionality

External I/O Pin Des riptions and Fun tionalityExternal I/O Pin Des riptions and Fun tionality

External I/O Pin Des riptions and Fun tionality................................

................................................................

...............................................

..............................

............... 7

2.1.

Power Button................................................................................................. 7

2.2.

COM Conne tor (RS-485).......................................................................... 7

2.3.

Digital I/O Conne tor.................................................................................. 8

2.4.

COM Conne tor ........................................................................................... 8

2.5.

DC-In Ja k ...................................................................................................... 9

2.6.

Mi ro SD Card Slot...................................................................................... 9

2.7.

Mini USB 2.0 Port........................................................................................ 10

2.8.

Mini HDMI

Port......................................................................................... 11

2.9.

LAN Port (Fast Ethernet)........................................................................... 12

3.3.

Onboard I/O

Onboard I/OOnboard I/O

Onboard I/O................................

................................................................

.......................................

..............

....... 13

1313

3.1.

MiniPCIe slot................................................................................................ 13

3.2.

SIM Card so ket.......................................................................................... 14

3.3.

WLAN (Wi-Fi) Conne tor......................................................................... 15

3.4.

SPI onne tor .............................................................................................. 16

4.4.

Hardware Installation

Hardware InstallationHardware Installation

Hardware Installation ................................

................................................................

........................................................

................................................

........................ 17

1717

4.1.

Removing Chassis Top Cover .................................................................. 17

4.2.

Installing the 3G MiniPCIe module and antenna ................................ 19

4.3.

Installing SIM Card..................................................................................... 21

4.4.

Installing the WLAN USB module.......................................................... 22

4.5.

Reinstalling the top over ........................................................................ 26

4.6.

Installing the Rubber feet (optional)..................................................... 27

4.7.

Installing the VESA mounting kit (optional) ........................................ 28

ARTiGO A600 User Manual

ARTiGO A600 User ManualARTiGO A600 User Manual

ARTiGO A600 User Manual

5.5.

Software and Te hni al Supports

Software and Te hni al SupportsSoftware and Te hni al Supports

Software and Te hni al Supports ................................

................................................................

....................................

........

.... 31

3131

5.1.

Linux Support.............................................................................................. 31

5.1.1.

Driver Installation.................................................................................. 31

5.2.

Te hni al Supports and Assistan e........................................................ 31

ARTiGO A600 User Manual

ARTiGO A600 User ManualARTiGO A600 User Manual

ARTiGO A600 User Manual

vii

Lists of Figures

Figure 1: Front panel layout............................................................................................ 5

Figure 2: Rear panel layout ............................................................................................. 5

Figure 3: Front side view dimension ............................................................................. 6

Figure 4: Right side view dimension.............................................................................. 6

Figure 5: Bottom side view dimension ......................................................................... 6

Figure 6: Reset button diagram ...................................................................................... 7

Figure 7: COM (RS-485 mode) onne tor diagram .................................................. 7

Figure 8: Digital I/O onne tor diagram ...................................................................... 8

Figure 9: COM onne tor diagram................................................................................ 8

Figure 10: DC-In ja k diagram......................................................................................... 9

Figure 11: Mi ro SD Card slot diagram ........................................................................ 9

Figure 12: Mini USB 2.0 port diagram......................................................................... 10

Figure 13: HDMI

port diagram ................................................................................... 11

Figure 14: LAN port diagram ........................................................................................ 12

Figure 15: MiniPCIe slot diagram ................................................................................. 13

Figure 16: SIM ard so ket diagram ............................................................................ 14

Figure 17: WLAN onne tor diagram ......................................................................... 15

Figure 18: SPI onne tor diagram ................................................................................ 16

Figure 19: Uns rewing the top over.......................................................................... 17

Figure 20: Removing top over .................................................................................... 18

Figure 21: Inserting 3G MiniPCIe module .................................................................. 19

Figure 22: Se uring 3G MiniPCIe module .................................................................. 19

Figure 23: Removing 3G antenna over...................................................................... 20

Figure 24: Installing 3G antenna .................................................................................. 20

Figure 25: Installing the SIM ard ................................................................................ 21

Figure 26: Removing the bottom a ess over......................................................... 22

Figure 27: Mounting the WLAN USB module........................................................... 23

Figure 28: Conne ting the WLAN USB board-to-board able ............................. 23

Figure 29: Removing WLAN antenna hole over..................................................... 24

Figure 30: Installing the WLAN USB antenna............................................................ 24

Figure 31: Conne ting WLAN mini oaxial able.................................................... 25

Figure 32: Installing the top over .............................................................................. 26

Figure 33: Se uring the top over ............................................................................... 26

Figure 34: Installing the rubber feet............................................................................ 27

Figure 35: Installing the VESA bra ket ....................................................................... 28

Figure 36: Installing the VESA plate ........................................................................... 29

Figure 37: Installing ARTiGO A600 system to the VESA plate............................. 30

ARTiGO A600 User Manual

ARTiGO A600 User ManualARTiGO A600 User Manual

ARTiGO A600 User Manual

viii

Lists of Tables

Table 1: COM onne tor pinout ................................................................................... 7

Table 2: Digital I/O onne tor pinout.......................................................................... 8

Table 3: COM onne tor pinout ................................................................................... 8

Table 4: DC-In ja k pinout .............................................................................................. 9

Table 5: Mi ro SD Card slot pinout.............................................................................. 9

Table 6: Mini USB 2.0 port pinouts............................................................................. 10

Table 7: HDMI

port pinout......................................................................................... 11

Table 8: LAN port pinout.............................................................................................. 12

Table 9: RJ-45 LAN port olor LED definition.......................................................... 12

Table 10: MiniPCIe slot pinout..................................................................................... 14

Table 11: WLAN onne tor pinout............................................................................. 15

Table 12: SPI onne tor pinout ................................................................................... 16

ARTiGO A600 User Manual

ARTiGO A600 User ManualARTiGO A600 User Manual

ARTiGO A600 User Manual

1.1.

1. Produ t Overview

Produ t OverviewProdu t Overview

Produ t Overview

The VIA ARTiGO A600 is an ultra slim and ompletely fanless embedded

system using VIA VAB-600 Pi o ITX board powered by WM8950 Cortex A9

Single-Core 800MHz pro essor with built-in 3D/2D graphi s engine and video

multi-standard de oder. It is ompletely ompatible with Linux Kernel 3.0.8

operating system.

The ARTiGO A600 is optimized for both power and performan e with a wide

operating temperature range from 0°C to 60°C, while offering very low power

onsumption of typi al 5W. It also supports multiple I/O onne tors in the

rear panel su h as mini USB 2.0 ports, mini HDMI

port, Mi ro SD ard slot,

Fast Ethernet LAN port, COM onne tor and DIO onne tor for diversified

embedded appli ations. In addition, the ARTiGO A600 offers four COM

onne tors for RS-485 mode interfa e in the front panel, and onboard

onne tors su h as SPI onne tor, SIM ard so ket, miniPCIe slot for 3G and

WLAN onne tor for USB module (VNT9271).

1.1. Key Features

1.1.1. ARM Based System

Using a single- ore WM8950 Cortex A9 800MHz pro essor, the VIA ARTiGO

A600 provides a full range of feature-ri h, extremely power-effi ient, and

ost-effe tive solutions that are suitable for the fast-emerging, ultra-portable

embedded omputing appli ations.

1.1.2. Ultra Slim and Spa e Saving

The ARTiGO A600 has an ultra slim hassis, designed to save spa e that makes

it suitable to install in spa e riti al environment and to ensure maximum

reliability. Its hassis design has a robust aluminum alloy top over and steel

bottom hassis.

1.1.3. Optimize Integration with Multiple I/O A ess

Front and rear I/O panel, and bottom a ess enable the ARTiGO A600 to

easily support various appli ations as well as for easy integration and qui k

setup.

ARTiGO A600 User Manual

ARTiGO A600 User ManualARTiGO A600 User Manual

ARTiGO A600 User Manual

1.1.4. Storage Expansion

ARTiGO A600 has an onboard 4GB eMMC flash storage and a Mi ro SD ard

slot for expandable storage.

1.1.5. Mounting Solution

The ARTiGO A600 supports multiple methods for mounting; it an be

mounted to VESA mountable surfa es or even to wall with the VESA

mounting kit (optional).

1.1.6. Wide Range of Operating Temperatures

The ARTiGO A600 arries a qualified thermal performan e design whi h

allows a wide range of operating temperatures from 0°C ~ 60°C, suitable for

riti al appli ations.

1.1.7. Networking Support

The ARTiGO A600 is equipped with RJ-45 port that supports high speed Fast

Ethernet. It also has a wireless networking option that gives the system a

freedom of 3G through mini PCIe slot, and WiFi onne tivity through onboard

WLAN(WiFi) onne tor.

1.1.8. Embedded OS ready

The ARTiGO A600 is 100% ompatible with Linux Kernel 3.0.8 operating

system.

Table des matières

Autres manuels VIA Technologies Matériel informatique

VIA Technologies

VIA Technologies P4M900 Manuel utilisateur

VIA Technologies

VIA Technologies SOM-9X50-STK Manuel utilisateur

VIA Technologies

VIA Technologies ARTiGO A1250 Manuel utilisateur

VIA Technologies

VIA Technologies Mobile360 FSS Manuel utilisateur

VIA Technologies

VIA Technologies SOM-9X50-STK Manuel utilisateur

VIA Technologies

VIA Technologies IVT01 Manuel utilisateur

VIA Technologies

VIA Technologies VB7009 Manuel utilisateur

VIA Technologies

VIA Technologies ARTiGO A935 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-3000 Manuel utilisateur

VIA Technologies

VIA Technologies SOM-9X35 Manuel utilisateur

VIA Technologies

VIA Technologies ARTiGO-A1200 Manuel utilisateur

VIA Technologies

VIA Technologies VNT6656GEV00 Manuel utilisateur

VIA Technologies

VIA Technologies SOM-9X35 Manuel utilisateur

VIA Technologies

VIA Technologies SOM-9X35-STK Manuel utilisateur

VIA Technologies

VIA Technologies EPIA-P720 Manuel utilisateur

VIA Technologies

VIA Technologies LPC-01 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-3000 Manuel utilisateur

VIA Technologies

VIA Technologies VT82C693A Manuel utilisateur

VIA Technologies

VIA Technologies ENT-610M Manuel utilisateur

VIA Technologies

VIA Technologies VAB-3000 Manuel utilisateur

VIA Technologies

VIA Technologies ARTiGO A820 Manuel utilisateur

VIA Technologies

VIA Technologies SOM-7000 Manuel utilisateur

VIA Technologies

VIA Technologies VAB-820 Manuel utilisateur

VIA Technologies

VIA Technologies VNT6656AU Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur