VeriFone Everest Plus Manuel utilisateur

Everest Plus

Installation Guide

Lithium Battery Caution

The Random Access Memory (RAM) in the Everest Plus terminal is

protected by a lithium battery. Do not, under any circumstances,

attempt to replace this battery. Failure to comply may invalidate the

product warranty.

Everest Installation Guide

VeriFone Part Number: 19712, Revision B

No part of this publication may be copied, distributed, stored in a

retrieval system, translated into any human or computer language, or

transmitted, in any form or by any means, without the prior written

consent of VeriFone.

VeriFone and Everest Plus are registered trademarks of VeriFone.

ZonTalk 2000 is a trademark of VeriFone.

Any other brand names and trademarks appearing in this guide are the

property of their respective holders.

Comments? Please email all comments on this document to

Tell_Us_More@VeriFone.com.

Everest Installation Guide

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Wall-Mounting a Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Unpacking the Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Connecting an Everest Plus to an ECR and Optional Peripherals .9

When and How to Connect the Power Pack . . . . . . . . . . . . . . . . .12

Routing Cable in the Cable Channels . . . . . . . . . . . . . . . . . . . . . .13

Using the Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Dimensions and Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Product Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

How to Order. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Power Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Everest Installation Guide

Introduction

The Everest Plus terminal is an economical, easy-to-use,

programmable device for entering Personal Identification

Numbers (PINs) necessary for the security of a transaction.

Application programs are written using the standard C

programming language. These programs can then be

downloaded directly from an electronic cash register (ECR),

another Everest Plus terminal, or a development PC, using the

Everest Plus terminal System Mode. This mode can also be

used for such functions as diagnostics, changing the password,

and Master Key insertion.

Figure 1 Sample Configuration

With three screen-addressable keys and three soft-function

keys, the versatile Everest Plus terminal can be customized to

your needs. The two-line display easily accommodates

prompts and messages, and the bi-directional card reader is

capable of reading Tracks 1, 2, and (optionally) 3.

Electronic Cash Register

VeriFone

Everest

Plus

Terminal

Everest Installation Guide

The powerful processor makes it ideal for supporting Frequent

Shopper applications and accepting multiple payment types,

such as credit, debit, and electronic benefit transfers (EBTs).

PIN security features safeguard the PIN and prevent the PIN

from being retrieved once the transaction is completed.

The Everest Plus terminal is easy to install and can be used at

any retail counter, multi-lane environment, or office. The

concave surface aids security when a customer is entering a

PIN, and the small footprint frees up counter space.

The terminal can simultaneously connect to three devices: an

ECR and up to two optional peripheral devices that have a 6-

pin or 8-pin mini-DIN port — such as a check reader and/or a

printer.

Installation

Selecting a Location

Select a location for your Everest Plus terminal that is

convenient for the customer and offers adequate ventilation

and protection. In general, avoid areas with:

• Excessive heat

• Oil or moisture

• Excessive dust

• Excessive electrical noise (caused by air conditioners,

motors, fans, or power tools)

• Direct sunlight

• Artificial light that could reflect glare off the display panel

Everest Installation Guide

Caution: Do not use the Everest Plus terminal or its power

pack outdoors.

Wall-Mounting a Terminal

You can mount a Everest Plus terminal on a wall using the

three slotted mounting holes on the bottom of the terminal.

Figure 2 Wall-mounting a Terminal

VeriFone recommends using wood screws at least 16 mm long

with a head diameter no larger than 7 mm. If mounting to

drywall, use masonry inserts that match the required screws.

4mm

4mm of screw should be

clear of the wall

Mounting

Holes

Y = 100.0 mm

(3.938 in.)

X = 59.8 mm

(2.375 in.)

Everest Installation Guide

Unpacking the Shipping Carton

Carefully inspect the shipping carton and its contents for

shipping damage.

Note: If the Everest Plus terminal is damaged, file a claim

immediately with the shipping company or carrier and notify

your local VeriFone distributor or service provider.

Warning: Do not use a damaged Everest Plus terminal.

Follow these steps to unpack the carton:

1. Remove the Everest Plus terminal from the carton.

2. Remove any protective plastic wrapping from the device

and place the device on a table or counter top.

3. Remove the plastic strip from the display panel. This strip

protects the display panel during shipment.

4. Remove the metal cable restraining strap and screw

(packaged in a plastic pouch located in the bottom of the

shipping carton).

5. These items will be used when installing the Multi-Port

Cable on the terminal. Save the carton and packing

material for re-packing or moving the device in the future.

6. Cables are packaged separately. At this time, remove the

cable(s) from its packaging and place it beside the Everest

Plus terminal.

7. If you will be using the optional Everest Plus power pack,

remove it from its packaging and place it beside the

Everest Plus terminal.

Everest Installation Guide

Figure 3 Cables and Power Pack

Connecting an Everest

Plus

to an ECR and Optional

Peripherals

Use a Multi-Port Cable to connect the Everest Plus terminal to

the tailgate port of an ECR and a Power Pack. The procedure

for connecting the Multi-Port Cable to an ECR varies slightly,

depending on which Multi-Port Cable option you use (see

“Accessories,” on page 17, for a list of supported cable

options). Some Multi-Port Cables have a built-in ECR “flying”

lead (one end of the cable embedded in the connector block;

the other end terminated with a modular SDL plug); other

Multi-Port Cable options have SDL ports to which you must

connect a separate ECR interface cable.

Refer to the next section for when and how to connect the

power pack.

(with flying lead)

Multi-Port Cable

Power

Pack

Peripheral

Interface Cable IBM ECR

Interface Cable

(no flying lead)

Multi-Port Cable

Everest Installation Guide

Warning: Disconnect the power from any peripheral device

before connecting the Everest Plus terminal to the device.

Ensure that you connect the devices in the given order, i.e.,

connect the Everest Plus terminal first.

1. Connect the end of the Multi-Port Cable with the 41-pin

connector into the bottom of the Everest Plus terminal.

2. Install the cable restraining strap as shown in Figure 4.

Insert the tab opposite the screw hole into the slot in the

terminal case, and then secure the strap over the cable with

the provided screw.

Figure 4 Installing the Cable Retaining Strap

3. Connect either end of the ECR Interface Cable into the

SDL port on the end of the Multi-Port Cable.

Table des matières

Autres manuels VeriFone Terminal tactile

VeriFone

VeriFone VX 520 Manuel utilisateur

VeriFone

VeriFone Commander Site Controller Manuel utilisateur

VeriFone

VeriFone evolution series Manuel utilisateur

VeriFone

VeriFone PINpad 1000SE Manuel utilisateur

VeriFone

VeriFone Vx680 BT Series Manuel utilisateur

VeriFone

VeriFone C18 Manuel

VeriFone

VeriFone P400 Manuel utilisateur

VeriFone

VeriFone VX-670 series Manuel utilisateur

VeriFone

VeriFone VX570 Guide de référence

VeriFone

VeriFone VX 675 Manuel utilisateur

VeriFone

VeriFone T650p Manuel utilisateur

VeriFone

VeriFone UX301 Manuel utilisateur

VeriFone

VeriFone VX 680 Manuel utilisateur

VeriFone

VeriFone UX410 Manuel utilisateur

VeriFone

VeriFone VX 520 Series Manuel utilisateur

VeriFone

VeriFone V210 Manuel utilisateur

VeriFone

VeriFone VX 675 Manuel utilisateur

VeriFone

VeriFone V400 Series Manuel

VeriFone

VeriFone OMNI 3300 Manuel utilisateur

VeriFone

VeriFone Tranz 330 Manuel utilisateur

VeriFone

VeriFone UX700 Manuel utilisateur

VeriFone

VeriFone VX-670 series Manuel utilisateur

VeriFone

VeriFone PP1000se Manuel utilisateur

VeriFone

VeriFone VX 600 Bluetooth Agnostic Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur