Vello BG-N1 Manuel utilisateur

BG-N1

BATTERY GRIP

Designed For The Nikon D300,

D300s And D700 SLR Cameras

USER

’

S MANUAL

Introduction

Thank you for choosing Vello and congratulations

on your new BG-N1battery grip purchase. Enjoy

the many benefits that a battery grip offers, such as

extended shooting time and more control and comfort

when shooting in a vertical (portrait) orientation.

The Vello BG-N1is compatible with the Nikon

D300, D300s and D700 DSLR cameras. The BG-N1

accepts one Nikon EN-EL3e, EN-EL4a, or EN-EL4

rechargeable battery, in addition to the camera’s

internal battery. Eight AA batteries (alkaline, Ni-MH,

lithium, or nickel-manganese) can be used instead for

added convenience. The BG-N1is equipped with an

alternate shutter-release button, AF-ON button, multi

selector, and main and sub-command dials for shooting

in a vertical position. Please read through this entire manual before using the

BG-N1battery grip.

Precautions

1. The BG-N1should only be used with compatible

devices specified in this manual.

2. Only use with batteries and battery holders

recommended in this manual. The BG-N1can

not be used with Nikon EN-EL3a/EN-EL3 Li-ion

batteries or other battery holders.

3. Cover the power terminals with the contact cap

when the BG-N1is not in use. This prevents

electrical shorts caused by metal objects touching

the power terminals.

4. When the battery holder is removed from the

grip, remove the batteries or place the holder in

a container to prevent electrical shorts caused by

contact with other metal objects.

5. The memory card access lamp may light up when

the BG-N1is mounted or removed from the

camera. This is part of the normal operation.

6. If you notice smoke, an unusual smell or noise from

the battery pack, discontinue use immediately.

Remove the batteries and take the device to a

Vello authorized reseller.

7. The BG-N1does not have a power switch.

Instead, use the camera power switch to turn the

power on or off.

8. The battery level may not display properly if

batteries are inserted before mounting the grip.

9. Remove batteries from the grip when not in use.

10. Do not attempt to disassemble.

11. Avoid water or extreme humidity and keep in a

dry and cool place.

12 . Keep out of reach of children.

OVERVIEW INTRODUCTIONASSEMBLYOPERATION

Overview

OVERVIEW INTRODUCTIONASSEMBLYOPERATION

1Sub-Command Dial *

2Shutter-Release Button *

3Control Lock Switch

To prevent accidental triggering, the

control lock switch locks the shutter-

release button, AE-ON button, multi

selector dial, as well as the main and

sub-command dials on the BG-N1.

Unlock prior to use by switching to

the position. The control lock is not

a power switch.

4Tripod Socket

5Mounting Screw

6Power Terminals

7Contact Cap

8Camera Contact Cover Holder

9Signal Contacts

10 AF-ON Button *

11 Main Command Dial *

12 Multi Selector *

13 Attachment Wheel

14 Battery Chamber Cover

15 Battery Chamber Latch

16 Battery Chamber

17 BC-N1Battery Holder

For Nikon EN-EL4a or EN-EL4

batteries.

18 EN-EL3eBattery Holder

Holder for Nikon EN-EL3e batteries.

19 Power Terminals (EN-EL3e Holder)

20 AA Battery Holder

Holder for eight AA batteries.

21 Power Terminals (AA Holder)

* These controls perform the same

function as their on-camera equivalents

and are affected by changes to the

Custom Settings menu (Group a for

the AF-ON button, Group f for other

controls). See camera manual for

details.

Attaching The Grip

1. Ensure that the power is

turned off on the camera

and that the Control Lock

on the BG-N1is in the L

position before attaching

the grip.

2. Remove the contact cap

from the BG-N1battery

grip. Replace the cap when

not in use to protect the

contacts.

3. The contacts for the BG-

N1are on the bottom of

the camera where they

are protected by a contact

cover. Remove the contact

cover before mounting the

grip.

4. To prevent loss, place the

camera contact cover in

the contact cover holder

on the BG-N1.

5. Connect the BG-N1

grip to the camera,

while aligning the grip’s

mounting screw with the

camera’s tripod socket.

6. Rotate the attachment

wheel in the direction

shown by the LOCK arrow

until it is firmly tightened.

Removing the battery from

the camera before mounting

the grip is not required.

OVERVIEW INTRODUCTIONASSEMBLYOPERATION

Inserting Batteries

1. Ensure that the power is

turned off on the camera

and the Control Lock on

the BG-N1is in the L

position. Turn the battery-

chamber latch counter-

clockwise to open the

battery chamber door.

2. Remove the battery

holder from the BG-N1

grip. The EN-EL3e battery

holder comes pre-installed

when shipped.

3. Nikon EN-EL3e Batteries:

Matching the indentations

on the battery with the

EN-EL3e holder, press

the battery down and

slide it in the direction of

the arrow until the power

terminals click into place.

4. Nikon EN-EL4a/EN-EL4:

Slide the battery release

latch toward the arrow.

Insert the two projections

from the battery into the

matching slots on the BC-

N1holder and slide the

release latch to lock.

5. AA Batteries: Place eight

AA batteries of the same

type in the AA battery

holder as shown, while

ensuring that they are in

the correct orientation.

6. Insert the battery holder

into the grip. Close the

battery chamber and then

turn the latch clockwise

to lock. Turn the camera

on and check the battery

level in the control panel

or viewﬁnder.

OVERVIEW INTRODUCTIONASSEMBLYOPERATION

The camera displays the following battery levels .

Nikon EN-EL3e, EN-EL4a, and EN-EL4 Batteries:

Control Panel Viewﬁnder Description

Battery fully

charged.

Battery partially

discharged.

Low battery.

Prepare spare

batteries.

(blinking) (blinking)

Battery

exhausted.

Shutter release is

disabled.

AA Batteries:

Control Panel Viewﬁnder Description

Battery fully

charged.

Low battery.

Prepare spare

batteries.

(blinking) (blinking)

Battery

exhausted.

Shutter release is

disabled.

Battery Info

Table des matières

Autres manuels Vello Accessoires pour appareils photo

Vello

Vello BG-P1 Manuel utilisateur

Vello

Vello BG-N7-2 Manuel utilisateur

Vello

Vello Screen Protector Ultra Manuel utilisateur

Vello

Vello BG-C9 Manuel utilisateur

Vello

Vello BG-N10 Manuel utilisateur

Vello

Vello BG-C12 Manuel utilisateur

Vello

Vello LAE-CM-CEF Manuel utilisateur

Vello

Vello BG-N21 Manuel utilisateur

Vello

Vello LAG-MFT-NF Manuel utilisateur

Vello

Vello FD-100 Manuel utilisateur

Vello

Vello BG-N19 Manuel utilisateur

Vello

Vello RCB-TC Manuel utilisateur

Vello

Vello BG-C18 Manuel utilisateur

Vello

Vello BG-C6 Manuel utilisateur

Vello

Vello BG-N8 Manuel utilisateur

Vello

Vello BG-N19-2 Manuel utilisateur

Vello

Vello BG-N15-2 Manuel utilisateur

Vello

Vello FreeWave Viewer Manuel utilisateur

Vello

Vello BG-N23 Manuel utilisateur

Vello

Vello BG-BMP6K Manuel utilisateur

Vello

Vello BG-S3 Manuel utilisateur

Vello

Vello BG-N16-2 Manuel utilisateur

Vello

Vello BG-P2 Manuel utilisateur

Vello

Vello BG-N4.2 Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur