Velleman Whadda WPM357 Manuel utilisateur

MANUAL

whadda.com

EN 3-CHANNEL HIGH POWER MOSFET MODULE

WPM357

Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the

environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a

specialized company for recycling. This device should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Whadda! Please read the manual thoroughly before bringing this device into service. If the

device was damaged in transit, do not install or use it and contact your dealer.

Safety Instructions

Read and understand this manual and all safety signs before using this appliance.

For indoor use only.

•This device can be used by children aged from 8 years and above, and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning the use of the device in a safe way and understand

the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall

not be made by children without supervision.

General Guidelines

•Refer to the Velleman®Service and Quality Warranty on the last pages of this manual.

•All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the

device is not covered by the warranty.

•Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.

•Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer

will not accept responsibility for any ensuing defects or problems.

•Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) –

of any nature (financial, physical…) arising from the possession, use or failure of this product.

•Keep this manual for future reference.

What is Arduino®

Arduino®is an open-source prototyping platform based on easy-to-use hardware and software.

Arduino®boards are able to read inputs –light-on sensor, a finger on a button or a Twitter message –

and turn it into an output –activating of a motor, turning on an LED, publishing something online. You

can tell your board what to do by sending a set of instructions to the microcontroller on the board. To

do so, you use the Arduino programming language (based on Wiring) and the Arduino®software IDE

(based on Processing). Additional shields/modules/components are required for reading a twitter

message or publishing online. Surf to www.arduino.cc for more information

Product overview

This module allows any digital circuit or microcontroller with 5 V DC outputs to easily switch high

current DC loads. It can be used to drive loads such as high power LEDs, heaters, motors,

solenoids, etc… (it is recommended to add freewheeling diodes when switching inductive loads

like motors and solenoids). The module uses 3 high current IRF540NS MOSFETs to safely and

efficiently switch these loads on and off.

Note that the MOSFETs input pins (gates) need at least 5 V DC to properly switch on. Level shifting

will be required when using 3.3 V signals.

Specifications:

Input voltage range: Max. 80 V

Max. switching current : 10 A per channel

MOSFET type: IRF540NS

Input signal voltage range: 5 –15 V DC

Weight: 25 g

Dimensions (W x L x H): 68 x 40 x 15 mm

Wiring description

Name

Arduino®connection

INA

MOSFET channel A input signal

Digital Pin (e.g. D2)

INB

MOSFET channel B input signal

Digital Pin (e.g. D3)

INC

MOSFET channel C input signal

Digital Pin (e.g. D4)

Ground

GND

VIN

External power supply input

GND

Ground

V+

External power supply

passthrough

VA-

MOSFET channel A drain

VB-

MOSFET channel B drain

VC-

MOSFET channel C drain

Example program

You can download the example Arduino® program by going to the official Whadda github page:

github.com/WhaddaMakers/3-Channel-MOSFET-module

1. Click the “Download ZIP” link in the “Code” menu:

2. Unzip the downloaded file, and browse to the example_code folder. Open the example

Arduino® sketch (example_code.ino) located in the folder.

3. Connect your Arduino compatible board, make sure the correct Board and connection port

are set in the tools menu, and hit Upload

whadda.com

Modifications and typographical errors reserved - © Velleman Group nv. WPM357

Velleman Group NV, Legen Heirweg 33 - 9890 Gavere.

Table des matières

Autres manuels Velleman Unité de contrôle

Velleman

Velleman K2664 Manuel utilisateur

Velleman

Velleman VMA405 Manuel utilisateur

Velleman

Velleman WHADDA MMA8452 Manuel utilisateur

Velleman

Velleman Velbus VMB4PD Manuel utilisateur

Velleman

Velleman WPM318 Manuel utilisateur

Velleman

Velleman VSC1 Manuel utilisateur

Velleman

Velleman VMP502 Manuel utilisateur

Velleman

Velleman VM103 Manuel utilisateur

Velleman

Velleman VMA446 Manuel utilisateur

Velleman

Velleman VMA436 Manuel utilisateur

Velleman

Velleman Whadda WPI471 Manuel utilisateur

Velleman

Velleman K8027 Manuel utilisateur

Velleman

Velleman VMA404 Manuel utilisateur

Velleman

Velleman VM106 Manuel utilisateur

Velleman

Velleman VMA301 Manuel utilisateur

Velleman

Velleman VMA326 Manuel utilisateur

Velleman

Velleman Whadda WPI474 Manuel utilisateur

Velleman

Velleman VMA319 Manuel utilisateur

Velleman

Velleman VMA410 Manuel utilisateur

Velleman

Velleman Whadda WPM48 Manuel utilisateur

Velleman

Velleman VMA338 Manuel utilisateur

Velleman

Velleman VMA214 Manuel utilisateur

Velleman

Velleman VMA325 Manuel utilisateur

Velleman

Velleman Whadda WPM463 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur