Vantrue N1 PRO Manuel utilisateur
OnDash N1 PRODash Cam
www.vantrue.net/contact facebook.com/vantrue.live
f
Always a surprise in Vantrue
Hey, find us here:
- 1 -
1. What’s in the box?
Was ist in der Box?
Die Übersicht über Kamera
Vorbereitung vor dem Einschalten
Grundlegende Operation
Spezifikationen
Garantie und Unterstützung
3
2. Camera Overview 4
3. Getting Started 5
4. Basic Operation 10
5. Specifications 21
6. Warranty & Support 22
ボックスに何が入っていますか？
23
45
ドラレコの概要
24
46
入門
25
47
基本操作
30
51
製品仕様
42
63
保証とアフターサービス
43
64
- 2 -
VERZEICHNIS
1. What’s in the box?
A. Car charger with built-in 10ft
mini USB cable
B. VANTRUE®N1 PRO dash cam
C. Suction cup mount
D. 3ft Micro USB data cable
E. N1 PRO dash cam user guide
F. Quick Guide
G. Warranty card
A
D
C
B
EF G
- 3 -
2. Camera Overview
NO. Name Description
1
2
3
4
Emergency /MODE Button
LED Indicator
LED Indicator
Power/ Menu Button
One press captures photos when the
camera is recording.
One press manually locks the current
recording video clip when the camera
is recording.
Long press to enter Parking Mode when
the camera is recording.
Recording LED indicator
Charging LED indicator
Power ON/OFF when Long press;
Enter/exit setup menu when the
camera is not recording.
Quickly exit the next menu page when
the camera is on Menu Interface.
5
6
UP Button
OK Button
Upward selection;
Fast forward when playing back videos;
Microphone ON/OFF switch.
Stops/stars the video recording;
Confirms the setup.
- 4 -
1
HD RESET
12 13
2
3
4
5
6
7
8
9
N1 PRO
10
11
8 Micro USB Port USB port for charging or data
transferring.
10
11
Speaker
9 Memory Card Slot Location for the micro SD memory card.
Camera Lens
Delivers sound when playing back
videos.
Front facing F1.8 160° wide camera for
video recording.
12 HDMI Port
13 Reset Revert to factory settings
Connects to HDMI cable.
LED Indicator
Red LED solid on
Blue LED blinks
Camera is being charged.
Camera is recording videos.
Red LED Off Camera is nearly full charged.
Screen overview
A. Charge via your USB charger
3. Getting started
3.1. Before using, charge the camera for 2-3 hours
- 5 -
0
2018/05/03
00:00:23
003KM/H
05:00:53
1080FHD
3
Video resolution
Capture
Recording standby status
Recording
Loop recording time
exposure
Parking Mode On
Parking Mode OFF
G-Sensor on
Memory card
inserted or not Date stamp Time stamp
Current Battery Level
Battery is charging
Microphone ON
Microphone OFF
GPS Signal Locked
GPS Signal Connecting
Recording time
Speed Unit
time Lapse
Lock Current File
7 Down Button Downward selection;
Slow forward when playing back videos;
Turn off/on Screen.
USB Charger
POWER BANK
B. Charge via the car charger
While charging, the LED indicator light is blinking red.
Note:
1. The device has two ports available for charging - the USB port on
the camera and the USB port on the suction cup mount.
2. When charging via a computer, please use the USB port on the
mount. If you use the port on the camera, the device will detect data
connecting to the computer and auto switch to “Mass Storage”
mode, in which the camera will not be setup or operated.
- 6 -
Please use a genuine microSD memory card of from 8GB to 256GB
with a speed rating of class 10 or higher. Insert the memory card to
the camera’s card slot, press it until it clicks. To take the card out, turn
off the camera first, then push the card into the slot until it clicks out.
3.2 Installing memory card
NOTE: When using a 64GB, 128GB or 256GB MicroSD card, please
format it to FAT32 on the camera first.
Please insert the card into the camera. If it says 'please insert TF
card' or 'error card please format' here, please press the recording
button(OK button) and press the power button to access into the
menu, go 'system setup' and choose 'Format SD Card'. Then select
the " OK " and wait for 10 seconds. Then the card will be formatted
successfully.
(If you format it on computer, please search online on "How to
formata 64GB microSD card to FAT32".）
NOTE:
1.The MicroSD card should be formatted every 2 weeks to maximize
the lifetime of the memory card.
2. Please do not take the card out when the camera is recording in
case that the important video files missing.
1. Connect the suction mount to the camera’s mounting socket,
push it in till it clicks.
3.3 Installing the camera onto your windshield
- 7 -
5. Line the power cable around the trim of your vehicle.
- 8 -
2. Clean the windshield using water or alcohol, and wipe clean
with a lint-free cloth.
3. Wipe clean the suction mounting pad on the camera mount.
4. Install the suction mount to the windshield, and rotate the
locking bar on the mount upward 90 degrees till it clicks, then
the camera is mounted on the windshield securely.
6. Plug the mini USB connect of the cable to the USB port on the
suction cup mount’s locking bar.
7. Insert the car charger into your vehicle’s cigarette lighter port.
8. Start the car, the camera will auto turn on and start recording.
vehicle’s cigarette
lighter port
- 9 -
Autres manuels pour N1 PRO
2
Table des matières
Langues :
Autres manuels Vantrue Caméra embarquée
Vantrue
Vantrue Nexus 5 Manuel utilisateur
Vantrue
Vantrue OnDash N2 Pro Manuel utilisateur
Vantrue
Vantrue S1 Pro Manuel utilisateur
Vantrue
Vantrue Falcon 1 Manuel utilisateur
Vantrue
Vantrue OnDash N4 Manuel utilisateur
Vantrue
Vantrue Element 2 Manuel utilisateur
Vantrue
Vantrue Element 2 Manuel utilisateur
Vantrue
Vantrue Element 1 Manuel utilisateur
Vantrue
Vantrue OnDash N2S Manuel utilisateur
Vantrue
Vantrue Sonnet 1 PRO Manuel utilisateur
Vantrue
Vantrue OnDash X1 PRO Manuel utilisateur
Vantrue
Vantrue OnDash X4S Manuel utilisateur
Vantrue
Vantrue Falcon 1 Manuel utilisateur
Vantrue
Vantrue N1 PRO Manuel utilisateur
Vantrue
Vantrue OnDash N4 Manuel utilisateur
Vantrue
Vantrue N1 PRO Manuel utilisateur
Vantrue
Vantrue OnDash X3 Manuel utilisateur
Vantrue
Vantrue Element 1 Lite Manuel utilisateur
Vantrue
Vantrue Element 3 Manuel utilisateur
Vantrue
Vantrue Nexus 5 Manuel utilisateur
