VALCOBABY T3 PLUS Manuel utilisateur

Thank you for purchasing a quality Valco Baby product. Please read and follow the instructions outlined in this

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all

the warnings and safety guidelines before use.

Important: Please read the following instructions carefully before assembling this product. Retain this

guide in a safe place for future reference.

PRODUCT REFERENCE GUIDE

Due to our policy of continuous product

development, this product is constantly evolving.

It is possible that some features or procedures

outlined here have changed since this document

was written. If you are unsure of any procedure

shown here, please contact us via the web at

[email protected] to obtain the most up to

date information before use. Include the batch

number, which can be found on a sticker on the

frame.

All pictures and diagrams herein are provided for

illustration purposes only. Actual product, colour

or fabric may vary. Valco Baby reserves the right

to modify or alter any specication or colour

without notice or obligation to modify any product

previously purchased

FURTHER INFORMATION

In Australia/New Zealand

www.veebee.com.au

In North America only

www.valcobaby.com

1800 610 7850

T3 PLUS

RECLINING STROLLER

STROLLER ASSEMBLY/OPENING

FIGURE A - ASSEMBLING YOUR STROLLER

1. Remove the carton contents carefully. Dispose of any

packaging materials thoughtfully.

2. Release the stroller from the locked position by lifting the

locking handle from locking rivet on the stroller frame.

HINT: You may have to squeeze the stroller legs and

handles closer together rst so as to release the tension

on the rivet.

3. Standing behind the stroller and holding it by the

handles, allow the wheels to fall forward.

4. With your foot, press down on the primary locking hinge

until the entire frame locks into the open position.

FIGURE B - ATTACHING THE REAR WHEELS

5. Identify the rear wheels by the red brake levers.

6. With the red levers facing to the rear, align the rear

wheel housing with the nylon housing on the rear frame

leg.

7. Insert rear wheel housing onto the rear leg and push

upward until you feel it lock into place.

8. Repeat for other leg.

IMPORTANT WARNING: ALWAYS TEST THAT ALL LATCHES ARE

SECURELY ENGAGED BEFORE USE.

FIGURE C - ATTACHING THE FRONT WHEELS

9. Insert the front swivel wheel over the housing on the

front leg. Repeat for the other wheel.

10. To x the front wheels in the non swivel position, turn

the wheel so that the two notches on both housings line

up at the front.

11. Press the swivel lock down rmly until it locks into

place. To unlock, lift the swivel lock with your foot lock to

release.

FIGURE D - ATTACHING THE HOOD

12. Fasten the hood Velcro straps around the top of the

frame (a). Clip the hood clip onto the frame just above

the folding hinge (b) and snap the side down into place

to secure.

13. Repeat for the other side.

14. Snap the back of the hood to the corresponding snaps

found on the back of the seat.

CLICK

FOLDING YOUR STROLLER

FIGURE E - FOLDING YOUR STROLLER

15. Lift the primary safety lock (a) with your foot.

16. Press down on the secondary lock (b) with

your foot.

17. Simultaneously push the handles all the way

down to meet the wheels.

18. Secure the frame closed with the locking

handle.

FIGURE F - USING YOUR HARNESS

TO SECURE YOUR CHILD IN THE HARNESS:

Your child MUST always be harnessed while in the

Stroller.

TO OPEN YOUR HARNESS:

19. Push down on both Buckle Prongs.

20. Simultaneously press the release button in the

centre of the buckle.

21. Lift the buckles from the Buckle Housing.

This process may be difcult as your buckle

system has been designed to meet very stringent

safety standards to ensure that a child cannot

release the harness unaided.

TO SECURE YOUR CHILD IN THE HARNESS:

22. Overlap buckles and so that they t together to

form one complete buckle.

23. Insert the completed buckle into the Buckle Housing

until it engages securely in place.

FIGURE G - USING YOUR BRAKES

24. To activate the brake press down on each brake lever

until it engages in the brake cog on the wheel.

25. To release, lift each brake lever in turn.

WARNING: ALWAYS ENGAGE BOTH WHEEL BRAKES WHEN THE

STROLLER IS AT REST.

FIGURE H - ADJUSTING YOUR SEAT AND FOOTREST

26.To raise the seat, gently push the seat forward with your

thumbs into the desired position.

27. To recline the seat, simultaneously squeeze both

red seat recline levers and ease the seat back to the

desired position.

ALWAYS TEST THAT THE SEAT IS SECURELY FIXED IN POSITION

BEFORE USE.

28. To adjust your footrest downward,

simultaneously press the adjusting button

and hold in while pressing down on the

footrest.

FOR SAFETY, YOUR FOOTREST IS DESIGNED TO

COLLAPSE IF EXCESS WEIGHT IS APPLIED TO IT.

PUSH

PRESS

DOWN

HOLD

DOWN

RELEASE

HOLD

CLICK

In Australia/New Zealand

www.veebee.com.au

In North America only

www.valcobaby.com

1 800 610 7850

WARNING

• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.

• PUT ON ALL THE BRAKES WHENEVER YOU PARK THE PRAM/STROLLER.

• DO NOT LEAVE CHILDREN UNATTENDED.

• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS PRAM/STROLLER.

• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST THE PRAM/STROLLER. OTHERWISE THEY MAY

BE INJURED.

Remember, your child’s safety is your responsibility...

•NEVER USE ON STAIRS OR ESCALATORS.

• AlwAys use the tether strAp when the stroller is in use.

• the CorreCt use AnD MAintenAnCe oF this VehiCle Are essentiAl.

• Be sure thAt All ClAMps AnD BuCkles Are seCurely FixeD AnD in plACe BeFore use

• when in the stroller, your ChilD Must AlwAys weAr the sAFety hArness, CorreCtly FitteD AnD ADjusteD, At

ALL TIMES.

• the MAxiMuM weight oF the ChilD For whiCh this stroller wAs intenDeD is 18 kgs.

• CAn Be useD FroM A newBorn BABy onwArDs. A CoCoon, speCiAlly DesigneD to Be useD with A stroller, is

RECOMMENDED WHEN ANY FULLY RECLINING STROLLER IS USED WITH A NEWBORN.

• neVer run with A newBorn BABy in Any prAM or stroller until the ChilD CAn sit up unAssisteD

(APPROXIMATELY 6 MONTHS).

• CheCk All pArts BeFore use For BreAkAge or FAtigue. DisContinue use iMMeDiAtely iF Any pArt is FounD to Be

DAMAGED OR BROKEN.

• MAxiMuM loAD oF BAskets: 3.5kgs.

• Do not CArry ADDitionAl ChilDren. THIS STROLLER IS MANUFACTURED FOR THE USE WITH ONE CHILD ONLY

• AlwAys Be AwAre oF the risks proViDeD By Fire AnD other signiFiCAnt sourCes oF heAt suCh As rADiAtors,

ETC. WHICH MAY BE IN THE IMMEDIATE VICINITY OF YOUR STROLLER.

• it MAy Be unsAFe to use Any ACCessories other thAn VAlCo BABy ApproVeD ones.

• this proDuCt is intenDeD For DoMestiC use only. it is not intenDeD For CoMMerCiAl use.

Should the chassis become wet, dry off promptly before storing. If this pram is used near the ocean or salted

roads, spray the chassis and seat frame with water and dry. We recommend a rust inhibiting product should

be used to prevent rust and fatigue on metal parts.

We recommend that you wipe down axles and lubricate the wheels every 3 months. Sand and dirt can grind

down axles, if you live near the beach or in a dusty environment you must wipe down the axles and wheels

then lubricate them monthly.

AXLES ARE BEST LUBRICATED WITH GREASE OR PETROLEUM JELLY. MOVING PARTS ARE BEST LUBRICATED

WITH SILICONE BASED PRODUCTS. DO NOT USE OIL BASED PRODUCTS.

Table des matières

Autres manuels VALCOBABY Poussette

VALCOBABY

VALCOBABY Runabout Series Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY Tri-Mode Twin Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY BUGGSTER BASSINET Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY REBEL Q Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY Latitude Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY EZ Rider Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY Slim Twin Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY ION STROLLER Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY Matrix Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY Zee Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY ION Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY SNAP Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY RunAbout Tri-mode series Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY VEE BEE LIO Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY VEEBEE CO-RIDER Manuel utilisateur

VALCOBABY

VALCOBABY Mini Marathon Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY MATRIX PLUS Manuel utilisateur

VALCOBABY

VALCOBABY Latitude Stroller Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY LATITUDE Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY snap ultra Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY prism Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY Zeetwo Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY RAD Manuel d'installation et d'exploitation

VALCOBABY

VALCOBABY Spark Manuel d'installation et d'exploitation

Manuels Poussette populaires d'autres marques

Hauck

Hauck Priya Trioset Manuel utilisateur

CHILDHOME

CHILDHOME CWQDN Manuel utilisateur

Dreamer Design

Dreamer Design Rebound GST Manuel utilisateur

Britax

Britax STEELCRAFT AGILE Manuel utilisateur

Graco

Graco 7427 Manuel utilisateur

Comfort

Comfort COMPASS Manuel utilisateur

OBaby

OBaby Aura Manuel utilisateur

Tutek

Tutek Tirso Manuel utilisateur

Babify

Babify Dual Plus Manuel utilisateur

Graco

Graco Stroller Manuel utilisateur

Special Tomato

Special Tomato Jogger Manuel utilisateur

Chicco

Chicco CORTINA TOGETHER TWO-PASSENGER STROLLER Manuel utilisateur

Otto Bock

Otto Bock Kimba neo Manuel utilisateur

Milly Mally

Milly Mally ROYAL Guide de démarrage rapide

Hauck

Hauck DUETT 3 PRAM Manuel utilisateur

BOB

BOB DUALLIE Manuel utilisateur

Nuna

Nuna Pepp Manuel utilisateur

Britax

Britax B2 Manuel utilisateur