Uniden UH6000 Manuel utilisateur
UH6000
Compact
UHF CB Transceiver
For more exciting new products please visit our website:
Australia: www.uniden.com.au
Introduction 3
Controls & Connectors 4
Indicators 6
Included with your UH6000 Transceiver 7
Connecting the Microphone 8
Mounting the MIC Hanger 9
Operation 10
Turning on the Power 10
Setting the Squelch Level 10
Monitor 12
Selecting a Channel 12
Programming the Instant Priority Channel 12
Recalling the Instant Channel 13
Transmitting 13
Call Function 13
Using Repeater Channels 13
Operating the UHF CB Radio in Duplex Mode 15
Scanning 15
Open Scan (OS) Mode 16
Group Scan (GS) Mode & Priority Watch 16
Add/Remove Channels from SCAN Memory 17
CTCSS & DCS 17
Busy Channel Lockout 18
Selecting the Call tone 18
Roger Beep 19
Key Beep On/Off 19
Backlight Colours 19
Backlight Brightness 20
LCD Flip 20
CTCSS Codes Table 21
DCS Codes Table 22
UHF CB Channel Guidelines 23
UHF CB Channels & Frequencies 24
Warranty 26
2
Contents
UNIDEN UH6000 UHF CB Transceiver
The Uniden UH6000 is designed to provide you with years of trouble
free service. Its rugged components and materials are capable of
withstanding harsh environments. Please read this Operating Manual
carefully to ensure you gain the optimum performance of the unit.
NOTE
The citizen band radio service is licenced in Australia by
ACMA Radio-communications (Citizen Band Radio Stations)
Class Licence and in New Zealand by MBIE General User
Licence for Citizen Band Radio and operation is subject to
conditions contained in those licenses.
Features
• Narrow Band (NB) 80 Channel
Radio*
• 12V DC Power Input
• Transmission power 5W
• LCD display
• Signal strength and RF power
(S/RF) meter
• Instant channel programming
• One touch Instant channel
recalling
• Selectable scanning type from
group scan (GS) and open scan
(OS).
• Scan channel memory On/Off
function separately divided into
OS and GS
• Monitor On/Off function
• Duplex capability*
• Key Beep On/Off function
• Rotary Channel select knob
• Busy Channel lock-out function
• Roger beep function On/Off
• 5 different CALLTones
• 50 built in CTCSS (Continuous
Tone Coded Squelch System)
codes and 104 DCS (Digital
Coded Squelch) are selectable
• Auto squelch detection
threshold control (“oF”, “1” ~ “9”)
• Volume control (“oF”, “1” ~ “40”)
• Power On/Off control SW
• Optional External Speaker
• Flip LCD function
• 7 LCD Backlight Colour
Options
• 4 Backlight Brightness Levels
• Under and over voltage alert
function
* Refer to p.23 - p.25 for
channel information
3
Introduction
UNIDEN UH6000 UHF CB Transceiver
4
Controls & Connectors
6
9
8
107
2
45 3
1
16
17
18
11 12
UNIDEN UH6000 UHF CB Transceiver
15
13
14
1Menu Button
/ Monitor function
(press & hold)
2PUSH control
- Squelch Select (press)
- Power On/Off (press & hold)
ROTARY control
- CHANNEL/ Menu Selector
3/ - Volume Up/Down
control/ Menu Selector
4Liquid Crystal Display (LCD)
5Channel Scan button
/Scan Memory (press & hold)
6MIC - Microphone Jack
7Speaker
8EXT SP - External Speaker
Jack
9Power Input Connection
(13.8VDC)
10 UHF Antenna Connection
11 CALL - Call Tone Button
12 MON - Monitor Mode
13 INST - Instant Channel
Button
14 Transmit Indicator
15 MICROPHONE
16 PTT - Push To Talk Button
17 RJ45 type plug
18 MIC Jack Cover
5
Controls & Connectors
UNIDEN UH6000 UHF CB Transceiver
1- Receive Signal Level (Channel Busy Indicator)
- Transmit Signal Power Level
2- Channel Number / Menu Item Setting
3- CTCSS/DCS Code number / Menu Item
4- Scan mode
5- Channel in Memory
6- Instant Channel
6
Indicators
2
3
4
1
6 5
UNIDEN UH6000 UHF CB Transceiver
Optional Accessories:
• UHF Antenna
• External Speaker
• Speaker Mic
Visit the UH6000 page on the website for more information on the
availability of optional accessories;
www.uniden.com.au for Australia
Microphone Owner’s Manual Microphone Hanger
with screws, washers
Quick Release
Bracket with screws DC Power Cord
with fuse
7
Included with your UH6000 Transceiver
UNIDEN UH6000 UHF CB Transceiver
UH6000
Ultra Compact
UHF Mobile Radio
For more exciting new products please visit our website:
Australia: www.uniden.com.au
MIC Jack
Push the MIC plug at the end of the microphone into the MIC jack until
the connection locks into place. Gently tug the MIC cord to test that the
connection is locked. Use the rubber cover which is on the MIC cord to
seal the MIC jack entry from dust.
Disconnecting the MIC from the MIC Jack
Pull back the rubber cover and move it down along the cord. Using the
at blade of a screwdriver or similar object carefully push the lock tab of
the MIC plug towards the MIC cord and at the same time tug on the MIC
cord to draw back the MIC plug.
8
Connecting the Microphone
UNIDEN UH6000 UHF CB Transceiver
The Microphone Hanger comes in two parts. How and where you mount
the MIC hanger will determine which parts to use.
Conventional Mounting with Screws
Use the front part of the MIC Hanger only.
Locate a suitable mounting position and mark and drill two 3mm holes.
Fix the MIC Hanger into place with screws.
Conventional Mounting with Double Sided Tape
Secure the front and back pieces of the MIC Hanger using the supplied
binding screws.
Locate a suitable mounting position.
Remove (peel off) the plastic covering the adhesive tape on the at area
of the MICHanger back piece and then press rmly to the mounting
position.
9
Mounting the MIC Hanger
UNIDEN UH6000 UHF CB Transceiver
10
UNIDEN UH6000 UHF CB Transceiver
Turning on the Power
Press and hold the Power/Channel Selector.
Operation
NOTE
Low-Voltage/High-Voltage Alert
If the power supply voltage exceeds 18VDC, an alert tone
sounds and dc HI ashes for 5 seconds. The power source
must not exceed 25VDC otherwise permanent damage
may occur to your radio, which may not be covered by the
manufacturer’s warranty.
If the input voltage falls below 10VDC, dc Lo ashes for 5
seconds. The power turns off automatically if voltage falls
below 8.5VDC.
Switch your UH6000 OFF and disconnect it from the power
source, before locating the cause of the power supply problem.
Setting the Squelch Level
The Squelch circuit determines when the radio’s audio output (speaker)
turns on, based on the strength of received signals. This avoids noise
and undesired signals constantly coming through the speakers.
Press the Power/Channel Selector momentarily. SqL shows and the
current squelch level will ash.
Turn the Channel Selector to select the desired squelch level.
Table des matières
Autres manuels Uniden Émetteur-récepteur
Uniden
Uniden HH955 Manuel utilisateur
Uniden
Uniden UH8060S Manuel utilisateur
Uniden
Uniden UH220 Series Manuel utilisateur
Uniden
Uniden POLARIS Manuel utilisateur
Uniden
Uniden UH305SX-2NB Manuel utilisateur
Uniden
Uniden UH5060VP Manuel utilisateur
Uniden
Uniden UH8080NB Manuel utilisateur
Uniden
Uniden UH8050S Manuel utilisateur
Uniden
Uniden UH810S Manuel utilisateur
Uniden
Uniden UH750 Manuel utilisateur
Uniden
Uniden UH9050 Manuel utilisateur
Uniden
Uniden UH850S Manuel utilisateur
Uniden
Uniden UH825 Series Manuel utilisateur
Uniden
Uniden BearTracker 885 Manuel utilisateur
Uniden
Uniden UH078SX-NB Manuel utilisateur
Uniden
Uniden UH5000 Manuel utilisateur
Uniden
Uniden PRO5050 Manuel utilisateur
Uniden
Uniden UH036SX-2NB Manuel utilisateur
Uniden
Uniden UH5060 Manuel utilisateur
Uniden
Uniden SPU 554KT Manuel utilisateur
