Uniden UH8010NB Manuel utilisateur

UH8010NB

Mini Compact

UHF CB Transceiver

For more exciting new products please visit our website:

Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

Introduction 3

Controls & Connectors 4

Indicators 6

Included with your UH8010NB Transceiver 7

Connecting the Microphone 8

Mounting the MIC Hanger 9

Operation 10

Turning on the Power 10

Setting the Squelch Level 10

Monitor 12

Selecting a Channel 12

Programming the Instant Priority Channel 12

Recalling the Instant Channel 13

Transmitting 13

Call Function 13

Using Repeater Channels 13

Operating the UHF CB Radio in Duplex Mode 15

Scanning 15

Open Scan (OS) Mode 16

Group Scan (GS) Mode & Priority Watch 16

Add/Remove Channels from SCAN Memory 17

CTCSS & DCS 17

Busy Channel Lockout 18

Selecting the Call tone 18

Roger Beep 19

Beep On/Off 19

Backlight Colours 19

Backlight Brightness 20

LCD Flip 20

CTCSS Codes Table 21

DCS Codes Table 22

UHF CB Channel Guidelines 23

UHF CB Channels & Frequencies 24

Warranty 26

Contents

UNIDEN UH8010NB UHF CB Transceiver

The Uniden UH8010NB is designed to provide you with years of trouble

free service. Its rugged components and materials are capable of

withstanding harsh environments. Please read this Operating Manual

carefully to ensure you gain the optimum performance of the unit.

NOTE

The citizen band radio service is licenced in Australia by

ACMA Radio-communications (Citizen Band Radio Stations)

Class Licence and in New Zealand by MED General User

Licence for Citizen Band Radio and operation is subject to

conditions contained in those licenses.

Features

• NarrowBand(NB)80Channel

Radio*

• 12VDCPowerInput

• Built-inAVSCircuitry†

• Transmissionpower5W

• LCDdisplay

• SignalstrengthandRFpower

(S/RF) meter

• Instantchannelprogramming

• OnetouchInstantchannel

recalling

• Selectablescanningtypefrom

group scan (GS) and open scan

(OS).

• ScanchannelmemoryOn/Off

function separately divided into

OS and GS

• MonitorOn/Offfunction

• Duplexcapability*

• KeyBeepOn/Offfunction

• RotaryChannelselectknob

• BusyChannellock-outfunction

• RogerbeepfunctionOn/Off

• 5differentCALLTones

• 38builtinCTCSS(Continuous

Tone Coded Squelch System)

codes and 104 DCS (Digital

Coded Squelch) are selectable

• Autosquelchdetection

threshold control (“oF”, “1” ~ “9”)

• Volumecontrol(“oF”,“1”~“40”)

• PowerOn/OffcontrolSW

• OptionalExternalSpeaker

• FlipLCDfunction

• 7LCD/KeyBacklightColour

Options

• 4LCD/KeyBacklightBrightness

Levels

• Underandovervoltagealert

function

* Refertop.23-p.25for

channel information

† AVS-AutomaticVolumeStabilizer

detects and manages incoming

audio to comparable levels.

Introduction

UNIDEN UH8010NB UHF CB Transceiver

Controls & Connectors

543

11 12

UNIDEN UH8010NB UHF CB Transceiver

1Menu Button

/ Monitor function

(press & hold)

2PUSH control - Squelch

Select (press)

/Power On/Off (press & hold)

ROTARY control - CHANNEL

Selector

3/ -VolumeUp/Down

control

4Channel Scan button

/ Scan Memory

(press & hold)

5Liquid Crystal Display (LCD)

6MIC - Front Microphone Jack

7Speaker

8Power Input Connection

 (13.8VDC)

9EXT SP - External Speaker

Jack

10 UHF Antenna Connection

11 CALL - Call Tone Button

12 INST - Instant Channel

Button

13 PTT - Push To Talk Button

14 MICROPHONE

15  RJ45typeplug

16 Front MIC Jack Cover

Controls & Connectors

UNIDEN UH8010NB UHF CB Transceiver

1- Receive Signal Level (Channel Busy Indicator)

- Transmit Signal Power Level

2- Channel Number / Menu Item Setting

3- CTCSS/DCS Code number / Menu Item

4- Scan mode

5- Channel in Memory

6- Instant Channel

Indicators

UNIDEN UH8010NB UHF CB Transceiver

Optional Accessories:

• DECTMICkit

• UHFAntenna

• ExternalSpeaker

VisittheUH8010NBpageonthewebsiteformoreinformationonthe

availability of optional accessories;

www.uniden.com.au for Australia

www.uniden.co.nz for New Zealand

Heavy Duty

Microphone

Owner’s Manual Microphone Hanger

with screws, washers

Mounting Bracket with

mounting screws

DC Power Cord

with fuse

Included with your UH8010NB Transceiver

UNIDEN UH8010NB UHF CB Transceiver

UH8010NB

Ultra Compact

UHF Mobile Radio

For more exciting new products please visit our website:

Australia: www.uniden.com.au

New Zealand: www.uniden.co.nz

MIC Jack

Push the MIC plug at the end of the microphone into the MIC jack until

the connection locks into place. Gently tug the MIC cord to test that the

connection is locked. Use the rubber cover which is on the MIC cord to

seal the MIC jack entry from dust.

Disconnecting the MIC from the MIC Jack

Pull back the rubber cover and move it down along the cord. Using the

atbladeofascrewdriverorsimilarobjectcarefullypushthelocktabof

the MIC plug towards the MIC cord and at the same time tug on the MIC

cord to draw back the MIC plug.

Connecting the Microphone

UNIDEN UH8010NB UHF CB Transceiver

The Microphone Hanger comes in two parts. How and where you mount

the MIC hanger will determine which parts to use.

Conventional Mounting with Screws

Use the front part of the MIC Hanger only.

Locateasuitablemountingpositionandmarkanddrilltwo3mmholes.

Fix the MIC Hanger into place with screws.

Conventional Mounting with Double Sided Tape

(not supplied)

High quality Double-Sided tape can be found at good retail stores.

Secure the front and back pieces of the MIC Hanger using the supplied

binding screws.

Locate a suitable mounting position.

Apply high quality Double-Sided tape

ontotheatareaoftheMIC

Hanger back piece and then

pressrmlytothemounting

position.

Mounting the MIC Hanger

UNIDEN UH8010NB UHF CB Transceiver

Turning on the Power

Press and hold the Power/Channel Selector.

Operation

NOTE

Low-Voltage/High-Voltage Alert

Ifthepowersupplyvoltageexceeds18VDC,analerttone

sounds and dc HIashesfor5seconds.Thepowersource

mustnotexceed25VDCotherwisepermanentdamage

may occur to your radio, which may not be covered by the

manufacturer’s warranty.

Iftheinputvoltagefallsbelow10VDC,dc Loashesfor5

seconds. The power turns off automatically if voltage falls

below8.5VDC.

Switch your UH8010NB OFF and disconnect it from the power

source, before locating the cause of the power supply problem.

Setting the Squelch Level

Press the Power/Channel Selector momentarily. SqL shows and the

currentsquelchlevelwillash.

Turn the Channel Selector to select the desired squelch level.

Table des matières

Autres manuels Uniden Émetteur-récepteur

Uniden

Uniden UH5040R Manuel utilisateur

Uniden

Uniden UH200 Series Manuel utilisateur

Uniden

Uniden UH064SX-2NB Manuel utilisateur

Uniden

Uniden UH7700NB Manuel utilisateur

Uniden

Uniden UH076DLX Manuel utilisateur

Uniden

Uniden UH750 Manuel utilisateur

Uniden

Uniden GRANT XL Manuel utilisateur

Uniden

Uniden JACKSON Manuel utilisateur

Uniden

Uniden UH037SX-2NB Manuel utilisateur

Uniden

Uniden UH078SX-NB Manuel utilisateur

Uniden

Uniden UH785 Series Manuel utilisateur

Uniden

Uniden UH7750NB Manuel utilisateur

Uniden

Uniden Grant LT Manuel utilisateur

Uniden

Uniden UH7700NB Manuel utilisateur

Uniden

Uniden Jackson UT-547C/D Manuel utilisateur

Uniden

Uniden X66 Manuel utilisateur

Uniden

Uniden UH8080S Manuel utilisateur

Uniden

Uniden UH8080NB Manuel utilisateur

Uniden

Uniden SPU 554KT Manuel utilisateur

Uniden

Uniden UH835S Manuel utilisateur

Uniden

Uniden 2080 Manuel utilisateur

Uniden

Uniden Jackson UT-547C Manuel utilisateur

Uniden

Uniden MHS245 Manuel utilisateur

Uniden

Uniden Sundowner UH-100 Manuel utilisateur

Manuels Émetteur-récepteur populaires d'autres marques

Yaesu

Yaesu FT-7B Manuel utilisateur

Kenwood

Kenwood ProTalk TK-3201 Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Kenwood

Kenwood TK-3180 Manuel d'utilisation et d'entretien

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur