Ubiquiti Rocket 5ac PtMP Manuel utilisateur

5 GHz airMAX®ac

BaseStation with airPrism™

Active RF Filtering Technology

Model: R5AC-PTMP

Introduction

Thank you for purchasing the Ubiquiti Networks® Rocket™5ac

PtMP. This Quick Start Guide is designed to guide you through

installation and also includes warranty terms.

Package Contents

5GHz airMAX®ac

BaseStationwith airPrism™

ActiveRF Filtering Technology

Model:R5AC-PTMP

Rocket5ac

PtMP

Gigabit PoE Adapter

(24V, 0.5A)

Power Cord Quick Start

Guide

Installation Requirements

• Shielded Category 5 (or above) cabling should be used for

all wired Ethernet connections and should be grounded

through the AC ground of the PoE.

We recommend that you protect your networks from the

most brutal environments and devastating ESD attacks

with industrial‑grade shielded Ethernet cable from Ubiquiti

Networks. For more details, visit

www.ubnt.com/toughcable

cable and earth grounding must be used as conditions of product warranty. TOUGHCable™is

designed for outdoor installations. It is the customer’s responsibility to follow local country

regulations, including operation within legal frequency channels, output power, and Dynamic

Frequency Selection (DFS) requirements.

Hardware Overview

LED Panel

RP-SMA Antenna

Connectors

Port Cover

LED Panel

Vertical Row

Signal In airOS, you can modify the wireless

signal strength threshold values for each LED on

the Advanced tab under Signal LED Thresholds.

The default values are shown below:

LED will light blue when the wireless

signal strength is above ‑65 dBm.

LED will light blue when the wireless

signal strength is above ‑73 dBm.

LED will light blue when the wireless

signal strength is above ‑80 dBm.

LED will light blue when the wireless

signal strength is above ‑94 dBm.

LAN LAN The LAN LED will light steady blue when an

active Ethernet connection is made to the LAN

port and flash when there is activity.

Power The Power LED will light blue when the

device is connected to a power source.

Horizontal Row

These LEDs are reserved for future use.

Ports

LAN

RESET

LAN Port

Reset

Button

LAN/PoE The Gigabit Ethernet port is used to connect the

power and should be connected to the LAN.

Reset Button To reset to factory defaults, press and hold the

Reset button for more than 10 seconds while the Rocket is

already poweredon. Alternatively, the Rocket may be reset

remotely via a Reset button located on the bottom of the

Gigabit PoE Adapter.

RESET

Switching Gigabit Power Supply/ PoE

Reset

Button

Hardware Installation

The Rocket5ac PtMP is designed to mount directly onto a

Ubiquiti airMAX Sector Antenna.

1. Press down on the Port Cover of the Rocket and slide it off.

2. Connect an Ethernet cable to the LAN port.

LAN

RESET

3. Replace the Port Cover.

*640-00131-06*

640-00131-06

4. Connect the RF cables to the RP-SMA Connectors located on

top of the Rocket.

5. Attach the Rocket to the sector antenna.

a. Align the mounting tabs on the back of the Rocket with

the four mounting slots on the sector antenna.

b. Slide the Rocket down until it locks into place.

6. Attach the other ends of the RF Cables to the RF connectors

in this combination: Chain 1 to Hand Chain 0 to V.

7. Slide the Protective Shroud over the Rocket until it locks

into place on the Sector Antenna.

Connecting Power over Ethernet

1. Connect the other end of the Ethernet cable from the

Rocket to the Ethernet port labeled POE on the Gigabit

PoE Adapter.

2. Connect an Ethernet cable from your LAN to the Ethernet

port labeled LAN on the Gigabit PoE Adapter.

3. Connect the Power Cord to the power port on the Gigabit

PoE Adapter. Connect the other end of the Power Cord to a

power outlet.

Accessing airOS

Connect to the airOS® Configuration Interface.

1. Make sure that your host system is connected via Ethernet

to the Rocket.

2. Configure the Ethernet adapter on your host system with a

static IP address on the 192.168.1.x subnet.

3. Launch your web browser. Type https://192.168.1.20 in

the address field. Press enter (PC) or return (Mac).

4. The login screen will appear. Enter ubnt in the Username

and Password fields. Select your Country and Language.

You must agree to the Terms of Use to use the product.

Click Login.

Note: For the Country setting, U.S. product versions

are restricted to a choice of Canada, Puerto Rico,

or the U.S. to ensure compliance with FCC/IC

regulations.

The airOS Configuration Interface will appear, allowing you

to customize your settings as needed. For additional details

on the airOS Configuration Interface, refer to the User Guide

available at documentation.ubnt.com/airmax

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Ubiquiti Point d'accès sans fil

Ubiquiti

Ubiquiti UniFi AP AC Lite Manuel utilisateur

Ubiquiti

Ubiquiti airFiber AF-11 Manuel utilisateur

Ubiquiti

Ubiquiti AirOS B2 Manuel utilisateur

Ubiquiti

Ubiquiti NBE-M5-16 Manuel utilisateur

Ubiquiti

Ubiquiti AmpliFi MeshPoint HD Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP FlexHD Manuel utilisateur

Ubiquiti

Ubiquiti AG-PRO-INS Manuel utilisateur

Ubiquiti

Ubiquiti Rocket R5AC-Lite Manuel utilisateur

Ubiquiti

Ubiquiti M900 Manuel utilisateur

Ubiquiti

Ubiquiti NBE-5AC-Gen2 Manuel utilisateur

Ubiquiti

Ubiquiti UAP-PRO UNIFI Manuel utilisateur

Ubiquiti

Ubiquiti UniFi AP AC Outdoor Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation M2 Manuel utilisateur

Ubiquiti

Ubiquiti BULLETM2-HP-US Manuel utilisateur

Ubiquiti

Ubiquiti UBB Manuel utilisateur

Ubiquiti

Ubiquiti Uni-fi AP Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Manuel utilisateur

Ubiquiti

Ubiquiti LTU-Lite Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation 5AC Loco Manuel utilisateur

Ubiquiti

Ubiquiti PowerBeam m5 iso PBE-M5-300-ISO Manuel utilisateur

Ubiquiti

Ubiquiti UniFi Enterprise AP Manuel utilisateur

Ubiquiti

Ubiquiti UAP Manuel utilisateur

Ubiquiti

Ubiquiti BulletM2-HP Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation5 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur