U-Line H-8094 Manuel utilisateur

PAGE 1 OF 2 0719 IH-8094

πH-8094

DELUXE HEAT GUN

1-800-295-5510

uline.com

Before performing any application, it is recommended

to experiment with a piece of scrap material.

1. Plug heat gun into properly rated outlet.

2. Turn switch to "II"position and the heat gun will have

full operating temperature in approximately two

minutes.

3. Adjustable stand is provided and allows nozzle to be

rotated from almost horizontal to vertical position.

4. To turn heat gun off after use, move switch to "I"

position. Run on cold for about three minutes. This

will allow the heat gun to cool down and the nozzle

become cool to the touch.

5. After the nozzle cools down, turn switch to "O"

position.

WARNING! This product is a source of very high

temperature. As with any electrical tool always

follow safety precautions to reduce the risk of

fire, electric shock, or any other injury.

WARNING! With a heat gun, as with any other

electrical device, keep a fire extinguisher

handy and observe all sensible fire precautions.

1. Keep the heat gun away from heat, rain, or moisture

exposure to reduce the risk of fire.

2. Do not direct the hot air stream to your clothing,

hands, or any other body parts.

3. Keep away from the reach of children.

4. Keep Nozzle face at least 1"away from shrink wrap

or from work surface.

5. Use heat gun in a well ventilated area.

SAFETY INSTRUCTIONS

OPERATION

PAGE 2 OF 2 0719 IH-8094

A qualified repair technician who is experienced with

the repair of electric tools must perform all repairs and

maintenance recommended in these instructions.

WARNING! Always unplug heat gun before

performing any maintenance or repairs. Use

only the same brand replacement parts.

LUBRICATION

The bearings are lubricated at the factory and require

no further lubrication.

CLEANING

Unplug heat gun before cleaning!

To clean the outside of heat gun, use only mild soap

and a damp cloth.

NOTE: DO NOT use other cleaning agents,

turpentine, gasoline, lacquer or paint thinner,

or other solvents that may contain chemicals

which are harmful to plastics and other

insulating materials.

NOTE: NEVER immerse heat gun in liquid or

allow liquid to get inside heat gun. Make sure

all vents and openings are free and clear from

debris.

MAINTENANCE

πCHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA

1-800-295-5510

uline.com

Autres manuels U-Line Outils électriques

U-Line

U-Line H-915 Manuel utilisateur

U-Line

U-Line H-10157 Manuel utilisateur

U-Line

U-Line H-1481 Manuel utilisateur

U-Line

U-Line SHRINKFAST 998 Manuel utilisateur

U-Line

U-Line H-1030 Manuel utilisateur

U-Line

U-Line H-2027 Manuel utilisateur

U-Line

U-Line SWINGLINE LIGHT TOUCH H-2323 Manuel utilisateur

U-Line

U-Line H-1302 Manuel utilisateur

U-Line

U-Line H-1993 Manuel utilisateur

U-Line

U-Line H-8094 Manuel utilisateur

U-Line

U-Line H-2028 Manuel utilisateur

U-Line

U-Line H-10066 Manuel utilisateur

U-Line

U-Line H-8094 Manuel utilisateur

U-Line

U-Line H-491 Manuel utilisateur

U-Line

U-Line SHRINKFAST H-6098 Manuel utilisateur

U-Line

U-Line H-491 Manuel utilisateur

U-Line

U-Line H-2027 Manuel utilisateur

U-Line

U-Line H-995 Manuel utilisateur

U-Line

U-Line H-1335 Manuel utilisateur

U-Line

U-Line H-738 Manuel utilisateur

U-Line

U-Line H-1028 Manuel utilisateur

U-Line

U-Line H-1993 Manuel utilisateur

U-Line

U-Line H-1026 Manuel utilisateur

U-Line

U-Line H-1440 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel