TYAN InterServe 90 Manuel utilisateur

InterServe 90

System Board Manual

D5AA00040

April 1999

Errata

The System Board Manual from the manufacturer of the system board

reflects a wrong jumper setting for dual-floppy operation. In this

manual, jumper JP4 is listed as being open for dual-floppy support.

The correct setting is as follows:

JP4 Pins 1-2

Dual-floppy support Closed

Single-floppy support Open

TyanS1832DL

Tiger 100

Motherboard User’s Manual

Revision 2.10

manual may be reproduced or translated without prior written consent from Tyan

Computer Corp.

All registered and unregistered trademarks and company names contained in this

manual are property of their respective companies including, but not limited to the

following.

AMI BIOS is a trademark of American Megatrend Incorporated.

Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

INTEL, Pentium II, Celeron, Xeon are trademarks of Intel Corporation.

S1832 Tiger 100 is a trademark of TYAN Computer Corporation.

Information contained in this publication has been carefully checked for accuracy and

reliability. In no event will Tyan Computer be held liable for any direct or indirect,

incidental or consequential damage, loss of use, loss of data, or other malady resulting

from errors or inaccuracies of information contained in this manual. The information

contained in this document is subject to change without notice.

PRINTED IN USA.

Table of Contents

1. Introduction...........................................................................4

Overview........................................................................4

Icons.............................................................................. 5

Hardware Specifications/Features................................... 6

Software Specifications...................................................8

Technical Support...........................................................8

Returning Merchandise for Service................................9

2. Board Installation..............................................................10

Unpacking....................................................................10

Installation....................................................................10

Setting Jumpers.............................................................24

3. Onboard Resource Settings..............................................26

Quick Reference for Jumpers........................................26

Map of Motherboard Jumpers....................................... 27

Soft Power Connector.................................................. 31

Speaker Connector Installation...................................... 31

Hardware Reset Switch Connector Installation...............31

External SMI............................................................... 32

Chassis Intrusion Alarm Connector................................ 32

CMOS RTC.................................................................32

Flash EEPROM........................................................... 32

Hardware CMOS & Password Reset............................33

RAM Installation.......................................................... 33

Cache Memory.............................................................34

Frequently Asked Questions..........................................35

4. BIOS Configuration...........................................................38

Main Setup...................................................................39

Advanced CMOS Setup................................................44

Chipset Setup............................................................... 49

Power Management Setup............................................ 55

PnP/PCI Setup.............................................................59

Peripheral Setup........................................................... 64

Supervisor and User Security.........................................68

Language Utility........................................................... 69

Flash Writer Utility........................................................69

5. System Resources.............................................................70

Beep Codes................................................................. 70

Troubleshooting System Problems..................................71

Displayed Error Messages............................................ 72

Appendix 1 - CPU Retention Module Options.....................74

Appendix 2 - Glossary........................................................... 76

http://www.tyan.com

Chapter 1

Introduction

Overview

The S1832DL Tiger 100 is a quality, high performance mainboard designed for

dual Intel Pentium II microprocessors. This mainboard utilizes the Intel 440BX

AGPset and can support CPU speeds of 233MHz through 450MHz, and host

bus speeds of 66MHz to 100MHz.

TheS1832DLmainboard,with built-inAGP slot,provides highperformance

capabilities that are ideal for a wide range of demanding applications such as

CAD, CAM, CAE, desktop publishing, 3D animation, and video production.

This integrated system board achieves high reliability with numerous features

and yet is small enough to be supported in an ATX form factor. Some of the

features included are onboard dual channel PCI PIO, Bus Master IDE and

UltraDMA/33, onboard floppy controller, and onboard high speed I/O.

Flexibility and expandability have been designed into the Tiger 100. With I/O

and drive controller support built onboard, the one AGP slot, five PCI and two

ISA slots (one shared, seven usable slots) are free for numerous add-on

expansion cards.

Remember to take a look at TYAN Computer’s web site located at

chapter 1

Introduction

http://www.tyan.com

INTRO

http://www.tyan.com. There you can find information on all of TYAN’s

products along with FAQs, distributors list, drivers, and BIOS setting explana-

tions.

Icons

In order to help you navigate this manual and set up your system, we have

added several icons to our format.

This icon alerts you to particularly important details regarding the

setup or maintenance of your system. This icon often appears

next to information that may keep you from damaging your board

or system. While we will often point out the most vital para-

graphs in a chapter, you should always read every word in the text. Failing to

do so can lead to exasperation and expense.

Wherever possible, we have included step-by-step instructions

for setting up your system, which are indicated by this icon.

However, it is in your best interest to read an entire section (and

perhaps the entire manual) before you begin to fiddle with your motherboard.

While we have alerted you to potential dangers in several places

in the manual with this icon, these warnings should not be

regarded as the whole of your safety regimen. Never forget that

computers are electrical devices, and are capable of delivering a shock. Prevent

damage to yourself and to your board: always ensure that your system is

turned off and unplugged whenever you are working with it, and that you are

equipped with a static safety device.

important!

procedure

warning

http://www.tyan.com

Chapter 1

Introduction

HardwareSpecifications/Features

Processor Information •Two SEC slots (Slot One type).

•66to 100MHzBIOS selectablebus

support.

•PentiumII233-450MHz.

•Supports Celeron CPU (single only).

Chipset Information •Intel440BXAGPset.

•IntelPIIX4econtroller.

•National 309 Super I/O chipset.

Voltage and Power •ATX power supply connector.

Information •+12Vpower source for DC fan

onboard.

•3.3VDRAM support.

•Utilizes GTL+ bus to reduce power

consumption and EMI.

Main Memory •Up to 1024MB onboard.

•Four 168-pin DIMM sockets.

•Supports100MHz SDRAM with

SPD.

System Management •NationalLM79 and LM75

ASICs with onboard alarm for

monitoring temperature, supply

voltages, and fan speed.

•System Manager software

•Chassis intrusion detection capable.

Expansion Slots •One32-bitAGPslot.

•Five 32-bit PCI Bus Master slots.

•Two 16-bit ISA slots.

•One shared, seven usable slots.

http://www.tyan.com

INTRO

Physical Dimensions •ATX design.

•12inches x9.8 inches.

•Requires Intel Venus compatible I/O

shield.

BIOS Information •AMI Plug and Play flash BIOS.

•DeepGreen,EnergyStar, ACPI,

Year 2000, and PC98 compliant.

•Soft power-down, multiple boot

options.

•Win98/NT5ready,DMI 2.0

compliant.

•PCI2.1, APM 1.1 compliant.

Disk Drive & System I/O •TwoPCIbus mastering EIDE

channels.

•SupportsEIDECD-ROMs.

•PIO Mode 3 & 4 (up to 17MB/sec

DTR).

•UltraDMA/33 bus mastering mode

(up to 33MB/sec DTR).

•Support for two floppy drives (up to

2.88MB).

•Twoserialports (16550 UARTs).

•OneECP/EPPparallelport.

•One IR (InfraRed) I/O interface port.

•TwoUSB rev 1.2 (universal serial

bus) connectors.

•One PS/2 mouse connector.

•One PS/2 keyboard connector.

http://www.tyan.com

Chapter 1

Introduction

SoftwareSpecifications

OS •Operates with MS-DOS, Windows

3.x,Windowsfor WorkGroup3.x,

Windows 95, Windows 98, Windows

NT, OS/2, Novell Netware,andSCOUnix.

Information presented in this publication has been carefully checked for

reliability. However, no responsibility is assumed for inaccuracies. The

information contained in this document is subject to change without notice.

Technical Support

If a problem arises with your system, you should turn to your dealer for help

first. Your system has most likely been configured by them, and they should

have the best idea of what hardware and software your system contains.

Hence, they should be of the most assistance. Further, if you purchased your

system from a dealer near to you, you can actually bring your system in to

them to have it serviced, instead of attempting to do so yourself (which can

have expensive consequences).

If your dealer is unable to assist you,

1) try our web page: http://www.tyan.com

2) user newsgroup: alt.comp.periphs.mainboard.tyan

3) technical support phone line: (510) 440-8808

4)or e-mailaddress: [email protected]

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels TYAN Carte mère

TYAN

TYAN S7045 Manuel utilisateur

TYAN

TYAN TOMCAT I845GL Manuel utilisateur

TYAN

TYAN THUNDER K7 Instructions d'installation et d'utilisation

TYAN

TYAN TIGER 133 Manuel utilisateur

TYAN

TYAN TOMCAT I875P Manuel utilisateur

TYAN

TYAN S5556 Manuel utilisateur

TYAN

TYAN TOMCAT N3400B Manuel utilisateur

TYAN

TYAN S8005 Manuel utilisateur

TYAN

TYAN THUNDER I7520, D, R, RD Manuel utilisateur

TYAN

TYAN Tiger K8WE Manuel utilisateur

TYAN

TYAN Toledo i3100 S5207 Manuel utilisateur

TYAN

TYAN THUNDER N3600S Manuel utilisateur

TYAN

TYAN Thunder K8S Pro Manuel utilisateur

TYAN

TYAN TEMPEST I5000XL Manuel utilisateur

TYAN

TYAN S7012 Manuel utilisateur

TYAN

TYAN THUNDER N3600B Manuel utilisateur

TYAN

TYAN S7056 Manuel utilisateur

TYAN

TYAN Tomcat i845GV S2198 Manuel utilisateur

TYAN

TYAN TOMCAT IVS D Manuel utilisateur

TYAN

TYAN S8010 Manuel utilisateur

TYAN

TYAN S7053 Manuel utilisateur

TYAN

TYAN THUNDER I7501 XTREME Manuel utilisateur

TYAN

TYAN THUNDER I7522 Manuel utilisateur

TYAN

TYAN TOMCAT I815EF Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur