Turbolock TL88 Manuel utilisateur
In order to continue serving our customers and providing
the best products, our product information including our
user manuals may receive updates from time to time.
Please check our website for the latest user manuals and
product materials. Ver 2.0 01/15/21
www.turbolock.com
Customer Service: 855-850-8031
TM
Section 1
Information & Safety Warnings 1
1.1 Introduction 1
1.2 Safety Warnings 1
1.3 Disposal at End-of-Life 2
Section 2
Package Contents & Overview 3
2.1 Contents 3
2.2 Overview 3
2.3 Battery Information 4
2.4 Usage Overview 4
Section 3
Installation (Retrot) 6
3.1 Pre-Installation 6
3.2 Main Installation 8
Section 4
Installation (New) 9
4.1 Pre-Installation 9
4.2 Main Installation 13
Section 5
Using the Passage Function 14
Section 6
Using The Fingerprint To Open
The Lock 15
Section 7
The Turbolock App 16
7.1 Installation 16
7.2 Pairing 16
7.3 App Usage 17
7.4 Unlocking the TL88 from the App 18
7.5 Managing User access (E-Keys) 19
7.6 Adding Fingerprint access via app20
Section 8
Resetting the Lock 21
Section 9
Maintenance 22
Section 10
Troubleshooting 22
Section 11
Warranty 24
10.1 Violation 24
10.2 Information 24
Table of Contents
1 TurboLock TL88
Section 1
Information & Safety Warnings
1.1 Introduction
This user manual will guide you through the functions and usage of your Turbolock TL88 Fingerprint Bluetooth-enabled Smartlock. It
is important that you follow all instructions and regard all notes that appear throughout this manual. Consult this manual before you
attempt to use your lock. If you have questions not answered by this manual or are in need of repair or non-routine service, contact
customer service at 1-855-850-8031. Before contacting customer service, please have your purchase information ready as this may
be needed during the call. This information may be recorded below.
Date of Purchase:
Place of Purchase:
1.2 Safety Warnings
When reading this manual, note these icons:
Notes with this icon MUST be read, understood, and obeyed to prevent injury or damage etc.
Notes with this icon include relevant information.
General Precautions
• The lock shall only be used as described in this manual.
• Verify that all parts of the lock are accounted for. If any part is missing, contact customer service.
• If the compartment or surrounding parts are damaged, do not use the lock.
• Use only four AAA batteries. Do not mix old and new batteries or batteries from dierent brands.
• Never insert objects into the lock other than batteries as described in this manual.
TurboLock TL88 2
• The lock is not a toy. Do not leave children unsupervised around the lock.
• Use only the parts included in the original packaging or received from Turbolock.
• Verify all surfaces are at and level before beginning installation. Installation on doors or surfaces with any type of
deformity such as gaps or warping may cause the lock to malfunction or fail to operate entirely.
• Expected use is for standard doors made for buildings within the U.S.
• Generally, the batteries can oer up to one full year of use before replacement is needed. Battery life varies by usage.
• Replace the batteries after receiving the lock’s low battery notication.
• Never apply any cleaner directly to any part of the lock. Only use clean water, mild cleaner, and soft, non-abrasive
cloth when cleaning.
• Risk of shock. Do not allow water and/or liquids to get into the lock’s electric parts.
• Never submerge the lock or any of the lock’s components.
• Hanging objects on the lock is not recommended.
• The lock may be used with the Turbolock app. The lock will function without the app but full functionality may only be
achieved when the app is used.
1.3 Disposal at End-of-Life
This product must not be disposed of by incineration, landlling, or mixing with household trash. Improper disposal of the battery
contained within this product may result in the battery heating up, rupturing, or igniting which may cause serious injury. The
substances contained inside the battery present chemical risks to the environment. The recommended disposal for any Turbolock
TL88 at its end-of-life is to dispose of the entire unit at or through an e-waste recycling center, program, or facility. Local regulations
and laws pertaining to the recycling and disposal of certain types of batteries and/or products containing them will vary according
to country, state, and local governments. You must check laws and regulations corresponding to where you live in order to properly
dispose of the battery and/or unit. It is the user’s responsibility to dispose of their waste equipment properly with accordance with
local regulations and laws.
For additional information about where you should drop o your batteries and electrical or electronic waste, please contact your local
or regional waste-management oce, your household waste disposal service, or your point-of-sale.
3 TurboLock TL88
Section 2
Package Contents & Overview
2.1 Contents
TL88 Fingerprint Bluetooth-enabled Fingerprint x 1
Outside Knob x 1
Inside Knob x 1
Latch Assembly x 1
Wood Screws x 4
Mounting Screws x 2
- Mounting screws may already be
inside the lock upon opening.
- Batteries not included.
2.2 Overview
1: Fingerprint Sensor
2: Micro-USB Emergency Power Port
3: Peg
4: Latch Pin
5: Latch Assembly
6: 4 x AAA Batteries (not included)
7: 2 x Inside Screws
8: Battery Compartment Cover
9: Battery Compartment
10: Mounting Screw
11: Reset Button
12: Inside Knob
13: Connector
14: Wood Screws
15: Outside Knob
16: LED Indicator
1
2
3
12
13
13
14
15
16
4
67
8
9
11
10
10
5
TurboLock TL88 4
2.3 Battery Information
The lock requires four (4) standard or rechargeable ‘AAA’ batteries which will be stored inside the back of the lock. The ashing red
LED followed by a beep indicates low batteries. Install new batteries as soon as possible after receiving the rst low-battery warning.
After the rst notication, the lock will only have enough power for approximately 50 uses before the batteries are fully depleted. This
indication can be received from the app or the lock itself; the lock will beep after being unlocked. Expected battery life for normal
use is approximately 10 months. If needed, use a battery pack (not included) with the lock’s emergency power port (see Section 2.4
below).
The time of the lock may reset after the batteries are replaced. Use the Turbolock app to unlock the TL88 and calibrate the time.
2.4 Usage Overview
The easiest way to use the lock is by using your authorized ngerprint to open the lock directly. Or with the app open, tap the lock
icon on the screen. Each time the lock engages and unlocks the door, regardless of entry method, the door can only be opened
while the indicator ashes green. After the LED indicator lights o, the TL88 will automatically lock itself.
Using the Emergency Power Port
An external battery pack (not included) can be used to supply power via the emergency power port on the bottom of the outside
knob. After connecting the external power source to the TL88’s micro-USB port, indicator will turn on indicating the lock is receiving
power. Use your ngerprint to unlock the door as usual.
Security Lock-Out Mode
The TL88 will beep twice and the indicator light will ash red if an unauthorized ngerprint is used. If a ngerprint cannot be
identied after 20 consecutive attempts, the TL88 will enter a Security Lock-Out Mode for 5 minutes. During this time, the
ngerprint reader will be temporarily disabled. The only way to unlock the TL88 while in this mode is with the app.
5 TurboLock TL88
With the TURBOLOCK App You Can:
Reset ngerprint authorizations while in Bluetooth range (approx. 30’)
Enable/Disable Passage mode while in Bluetooth range (approx. 30’)
Unlock the TL88 while in Bluetooth range (approx. 30’)
Share and manage eKeys from anywhere in the world
View unlock records from anywhere in the world
Manage user access from anywhere in the world
Directly from the TL88 Lock You Can:
Unlock the TL88 with authorized ngerprint
Engage Passage mode
Reset the lock
TurboLock TL88 6
Section 3
Installation (Retrot)
This section details installation steps needed if you are installing the TL88 on a door with a single cutout already made.
To replace an older xture with a newer one is known as a retrot. If your door has never had a lock or doorknob
installed or otherwise has no cutout, please skip to Section 4.
• For easier installation, have another person help to hold the door open or, if needed, the lock and/or parts.
• Remove all parts of any old lock before installing the TL88. In some cases, the old strike plate and/or box may be used.
• For your convenience, installation instructions are broken into segments. Read and follow the instructions for both Pre-
Installation and Main Installation.
• If your door happens to have two cut-outs, check the clearance between the two. Make sure there is enough distance so that
you may seal o any extra opening.
3.1 Pre-Installation
Part 1 - Disassemble the Lock
The TL88 comes already assembled.
Before installation, release the inside
screws and mounting screws to
disassemble the lock into three main
parts: Outside Knob x 1, Inside Knob x 1,
Latch Assembly x 1.
(Fig. 1)
Outside Knob
Latch Assembly
Inside Knob
7 TurboLock TL88
Part 2 - Installing the Latch
KEEP DOOR OPEN AT ALL TIMES SHORTLY BEFORE, DURING AND SHORTLY AFTER INSTALLATION. If the lock is
incomplete or improperly installed, the lock and/or door may become stuck.
• After nishing installation, be sure to use the door at least once to make sure all parts of the lock function correctly.
(Fig. 2) (Fig. 3) (Fig. 4)
Step 1. Insert the latch into the hole and check it. The latch’s plate should sit ush against the edge of the door (Fig. 2). If there’s
too much space behind the latch or if it’s sticking out of the door, the latch should be adjusted. If the latch needs
adjusted, move to Step 2. If it doesn’t need adjusted, skip to Step 3.
Step 2. Hold the front of the latch and the square opening from both sides. Pull or push to extend or retract the latch end as
needed(Fig. 3). Insert the latch back into the door.
Step 3. Check the latch’s bolt and make sure the rounded side faces in. Add 2x Wood Screws and use a screwdriver (not
included) to secure them (Fig. 4).
Part 3 - Installing the Strike
In most cases, the existing strike plate and setup can be used. If you wish to use the one included with your lock, skip to Section
4.1, Part 3.
Table des matières
Autres manuels Turbolock Verrouillage
Turbolock
Turbolock TL-400KBL Manuel utilisateur
Turbolock
Turbolock TL117 Manuel utilisateur
Turbolock
Turbolock TurboSafe Manuel utilisateur
Turbolock
Turbolock tl-200 Manuel utilisateur
Turbolock
Turbolock TL-400KBL Manuel utilisateur
Turbolock
Turbolock TL117 Manuel utilisateur
Turbolock
Turbolock TL114 Manuel utilisateur
Turbolock
Turbolock TL111 PRO Manuel utilisateur
Turbolock
Turbolock TL116 Manuel utilisateur
Turbolock
Turbolock TL111PRO Manuel utilisateur
