Tripp Lite HTR15-2U Guide de configuration

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: [email protected]

Model #: HTR15-2U

1500 VA Audio/Video Pure Sine Wave UPS System

Highlights

1500VA -1200W on-line, double-conversion, extended-run UPS; rackmount

hardware included

6 outlets; 2 switchable load banks

IP remote access, control and diagnostics capability with email notification

(built-in accessory slot, SNMPWEBCARD available separately)

Zero transfer time to battery takes incoming AC power and remakes it into

perfect output power with a pure sine wave

Maintains sine wave 100/110 or 120V +/-2% output during overvoltages to 138

and brownouts as low as 65V (50/60Hz auto-sensing)

Pure Sine Wave operation completely isolates connected components from

power problems.

Drivers written for Crestron, AMX and Savant for seamless integration

$250,000 Ultimate Lifetime Insurance (USA and Canada Only)

Description

Tripp Lite's HTR15-2U Pure Sine Wave 1500VA/1200W on-line, double-conversion UPS system prevents media data loss, equipment freeze-ups,

downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Provides full-time sine wave 100, 110 or 120V

+/-2% output with zero transfer time between AC and battery operation. Actively converts raw incoming AC power to DC, then re-converts output

back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to

138V. Network-grade AC surge and EMI/RFI line noise suppression. Dataline surge suppression for a dialup, DSL or network Ethernet connection.

Requires only 2 rack spaces (2U). Large internal batteries provide 18 min. half-load runtime and 8 min. full load runtime; runtime is expandable with

optional BP48V24-2U and BP48V60RT-3U external battery packs. 1500VA/1200W power handling capacity is compatible with audio/video

components and other sensitive electronic applications. Includes 6 UPS-supported outlets arranged in two switchable load banks that can be

individually controlled via software interface to reboot selected equipment on demand or automatically shed less significant loads to extend battery

runtime for more critical equipment. Supports simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot for the ultimate

in IP remote access, control and diagnostics capability with email notification. HID-compliant USB interface enables full integration with built-in power

management and auto-shutdown features of Windows, Mac OS X and Linux. Supports simultaneous detailed monitoring of equipment load levels,

self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Multi-function

audible alarms and front-panel LEDs provide at-a-glance notification of UPS and line power status. Attractive all-black color scheme. $250,000

connected equipment insurance (USA and Canada Only)

Applications

Ideal for protection of AV systems, Crestron, AMX, HD sources, boardrooms, studios, houses of worship - FOH and other sensitive

electronic equipment

Package Includes

HTR15-2U Audio/Video Pure Sine Wave UPS System

PowerAlert Software and cabling

Mounting hardware for 4-post rack enclosures

Instruction manual with warranty information

Features

HTR15-2U Pure Sine Wave UPS provides perfectly regulated sine wave output within 2% of 100/110/120V (user selectable) under all usage

conditions

1500VA/1200W power handling capacity compatible with control systems, high-definition sources, Audio/Video editing suites, digital

consoles, DVD/music/PCs/servers, RAIDs, media centers, PVRs/DVRs, boardrooms, digital processors/EFX, racks and other sensitive

electronics

Removes harmonic distortion, fast electrical impulses, frequency variations and other hard-to-solve power problems not addressed by other

UPS types

Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 100/110/120V (+/-2%) values

2 switchable load banks (2 outlets each) enable remote outlet management for load shedding or remote reboot of individual devices from

anywhere in the world

Single-line tel/DSL/Ethernet surge suppression

Internal battery set offers 18 min. runtime at half load (600W) and 8 min. at full load (1200W)

Optional BP48V60RT3U external battery pack increases runtime to 155 min. at half load (600W) and 72 minutes at full load (1200W);

multi-pack compatible

Optional BP48V24-2U external battery pack increases runtime to 75 min. at half load (600W) and 34 min. at full load (1200W); limit 1

Fault-tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure

and requires maintenance

Compact rackmount form factor installs in 2 rack spaces (2U) with a maximum installed depth of only 19 in.

Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP* interfaces (*requires optional

SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software

HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows, Mac OS X

and Linux

PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager and email

notification, event logging and running user-defined script commands

Front panel LEDs offer current monitoring and battery charge level information

UPS ships fully assembled in full compliance with DOT regulations; no time-consuming connection of internal batteries by user required

$250,000 Ultimate Lifetime Insurance (USA and Canada Only)

Specifications

OUTPUT

Output Volt Amp

Capacity (VA)

1500

Output Watt

Capacity (watts)

1200

Nominal Output

Voltage(s) Supported

100V; 110V; 120V

Frequency

compatibility

50/60 Hz (auto-selectable)

Frequency

compatibility details

Output frequency matches input nominal on startup

Output voltage

regulation (line

mode)

+/- 2%

Built-in UPS output

receptacles

6 5-15R outlet(s)

Built-in controllable

switched load banks

Two controllable 5-15R load banks (bank 1 - two outlets, bank 2 - four outlets)

INPUT

Rated input current

(at maximum load)

12A

Nominal Input

Voltage(s) Supported

120V AC

UPS input

connection type

5-15P

UPS Input cord

length (ft.)

10 ft.

UPS Input cord

length (m)

3.05

Recommended

Electrical Service

120V 15A

Voltage

compatibility (VAC)

120

BATTERY

Full load runtime

(minutes)

5 min. (1200w)

Half load runtime

(minutes)

18 min. (600w)

Expandable battery

runtime

Supports extended runtime with optional external battery pack BP48V24-2U (limit 1) and BP48V60RT-3U (multi-pack

compatible)

External battery

pack compatibility

BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible)

DC system voltage

(VDC)

Battery recharge

rate (included

batteries)

Less than 6 hours from 10% to 80%

Replacement battery

cartridge (internal

UPS battery

replacement)

RBC94-2U

Battery Access Hot-swap battery replacement supported via front access panel

Typical battery

lifespan

3-6 years, depending on usage

VOLTAGE REGULATION

Voltage regulation

description

On-line, double-conversion power conditioning maintains output within 2% of 100/110/120 volts at all times

Overvoltage

correction

Maintains output of selected nominal +/-2% during overvoltages to 138V AC

Undervoltage

correction

2% output voltage regulation during undervoltages to 80

Severe undervoltage

correction

Maintains output within 2% of nominal during undervoltages to 65 (under 70% load only)

LEDS ALARMS & SWITCHES

LED Indicators 14 LEDs indicate line power, online mode, economy/bypass mode, on-battery, overload, battery low, replace battery

and fault status information; 4-LED meter displays load and battery charge levels; LED panel rotates for viewing in

rack/tower formats

Alarms Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 sec. on / 0.5 sec. off),

low battery warning (1.25 sec. on / 0.5 sec. off), overload (sounds continuously), UPS fault (4.2 sec. on / 1 sec. off),

input voltage out of frequency (2.1 sec. on / 0.14 sec. off) and high input voltage (2.1 sec. on 0.07 sec. off)

Switches Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during

normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all

switch functions require tha

SURGE / NOISE SUPPRESSION

UPS AC

suppression joule

rating

480 joules

EMI / RFI AC noise

suppression

Yes

AC suppression

response time

Instantaneous

Dataline suppression Set of 8-wire RJ style interface jacks offer surge suppression for tel/DSL/Ethernet connections. Pins 1,2,3 and 6 offer

Ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer tel/DSL line suppression starting at

260V

PHYSICAL

Installation form

factors supported

with included

accessories

4 post 19 inch rackmount (mounting rail kit included)

UPS / Power Module

dimensions in

primary form factor

(height x width x

depth / inches)

3.5 x 17.5 x 19

UPS / Power Module

dimensions in

primary form factor

(height x width x

depth / cm)

8.9 x 44.4 x 48.3

Rack Height 2U

UPS / Power Module

weight (lbs)

47.4

UPS / Power Module

weight (kg)

21.5

UPS Shipping

dimensions (height

x width x depth /

inches)

9.8 x 20.2 x 24

UPS Shipping

dimensions (height

x width x depth / cm)

24.8 x 51.4 x 61

Shipping weight (lbs) 57.3

Shipping weight (kg) 26

Cooling method Built-in cooling fan

UPS housing

material

Steel

ENVIRONMENTAL

Operating

Temperature Range

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Storage

Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Relative Humidity 0 to 95%, non-condensing

AC mode BTU / hr.

(full load)

609.7

Battery mode BTU /

hr. (full load)

664.2

COMMUNICATIONS

Communications

interface

USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface

WatchDog

compatibility

Compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of

application/OS or hard power off/on reboot of connected equipment - ideal for unattended applications

EPO port Supports Emergency Power Off function via set of dedicated built-in EPO jacks

SNMP compatibility Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD)

Software and

cabling included

Yes, includes PowerAlert software CD-ROM and complete cabling

LINE / BATTERY TRANSFER

Transfer time No transfer time (0 ms.) in online, double-conversion mode

Low voltage transfer

to battery power

(setpoint)

80V (100% load), 65V (

High voltage

transfer to battery

power (setpoint)

138

SPECIAL FEATURES

Cold Start (startup in

battery mode during

a power failure)

Cold-start operation supported

Appearance Attractive all-black color scheme

CERTIFICATIONS

Certifications Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), NOM (Mexico), Class A (emissions), FCC Part 68 /

Industry Canada (Telecommunications)

WARRANTY

Product Warranty

Period (Worldwide)

2-year limited warranty

Optional Coverage 3- and 5-year extended warranties, plus next day and on-site warranty coverage available for select opportunities.

Contact Tripp Lite for additional information.

Connected

Equipment

Insurance (U.S.,

Canada & Puerto

Rico)

$250,000 Ultimate Lifetime Insurance

Manuels UPS populaires d'autres marques

Pylontech

Pylontech Victron & Pylontech US5000 Manuel utilisateur

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuel utilisateur

Mecer

Mecer ME-1000-WTU Manuel utilisateur

Mustek

Mustek PowerMust 530(B) Plus Manuel d'installation et d'exploitation

Emerson

Emerson Liebert NXL series Manuel utilisateur

MAKELSAN

MAKELSAN BOXER SERIES Manuel utilisateur

Block

Block PC-0524-400-0 Manuel utilisateur

CyberPower

CyberPower CP585LCD Manuel utilisateur

Eaton

Eaton 3S Instructions de montage

CyberPower

CyberPower Office Tower Series UPS 1000 Manuel utilisateur

CyberPower

CyberPower BM100 Manuel utilisateur

Best Power

Best Power 610 Manuel utilisateur

Best Power

Best Power Unity/I UT3K Manuel utilisateur

Mustek

Mustek PowerMust 400 Offline Manuel utilisateur

Xantrex

Xantrex Trace 512 UR-UPS Manuel utilisateur

Forza

Forza SL-1501UL Manuel utilisateur

LEGRAND

LEGRAND keor 310081 Manuel utilisateur

ABB

ABB Conceptpower DPA 500 Manuel utilisateur