Tripp Lite B127P-002-H Manuel utilisateur
1
Owner’s Manual
4K/60 HDMI over Cat6 Extenders
and Splitters, Multi-Resolution
Function Support
Local Unit Models: B127P-002-H, B127P-004-H
Remote Unit Models: B127P-100-H, B127P-100-H-SR
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an
ISOBAR surge protector in our monthly drawing!
tripplite.com/warranty
Español 17 • Français 33 • Русский 49
2
Package Contents
Product Features
B127P-002-H
B127P-004-H
B127P-100-H
B127P-100-H-SR
Local (L) Unit or Remote (R) Unit L L R R
External Power Supplies (0 or 1) 1 1 0 0
Mounting Hardware Y Y Y N
All
• Support a maximum video resolution of 4K (3840 x 2160) @
60 Hz with 4:4:4 Chroma Subsampling
• Support up to 7.1-channel surround sound audio
• HDMI 2.0, HDCP 2.2 and HDR compatible
• Plug and play—no software or drivers required
3
Product Features
B127P-002-H
• 2-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit
• Splits an HDMI signal into two
• Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR
receiver units to extend an HDMI signal
• Power over Cable (PoC) function to transfer power to remote receivers
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to co-
exist in a single application without downgrading signal quality to the
lowest resolution
• Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
B127P-004-H
• 4-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit
• Splits an HDMI signal into four
• Works in tandem with Tripp Lite’s B127P-100-H and B127P-100-H-SR
receiver units to extend an HDMI signal
• Power over Cable (PoC) function to transfer power to remote receivers
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to co-
exist in a single application without downgrading signal quality to the
lowest resolution
• Includes an additional HDMI port, which can be used to connect a
local monitor or to daisy-chain additional B127P-004-H units (up to
three units can be daisy-chained together)
• Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
4
Product Features
B127P-100-H
• HDMI over Cat6 Power over Cable (PoC) Remote Receiver Unit
• Works with B127P-002-H and B127P-004-H extender/splitters to
extend a 4K @ 60 Hz signal up to 125 ft. (38 m) from the source
• Built-in equalization control for video image auto-adjustment
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to
co-exist in a single application without downgrading signal quality to
the lowest resolution
• Includes mounting hardware that allows unit to be wall-mounted, rack-
mounted or pole-mounted
B127P-100-H-SR
• HDMI over Cat6 Power over Cable (PoC) Short Distance Remote
Receiver Unit
• Works with B127P-002-H and B127P-004-H extender/splitters to
extend a 4K @ 60 Hz signal up to 50 ft. (15 m) from the source
• Built-in equalization control for video image auto-adjustment
• Supports 4K (3840 x 2160) @ 60 Hz and 1080 @ 60 Hz signals
• Multi-resolution function allows displays with varying resolutions to
co-exist in a single application without downgrading signal quality to
the lowest resolution
• Built-in 6 in. HDMI pigtail cable attaches directly to HDMI port at
display
Optional Accessories:
• N202-Series Cat6 24 AWG Solid Wire Patch Cables
• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables
5
Disclaimer
Before installation, please check the following settings of your source(s)
and TV/monitor(s):
1. Set to display 60 Hz. Double-check factory settings, as default can
be set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4.
3. Verify your monitor has the HDR feature enabled. Some displays
may have this feature disabled as a factory setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note: If you wish to connect a local monitor to your installation, depending
on your TV/monitor make/model, the UHD Deep Color setting may need to be
disabled on your local TV/monitor to achieve 4K 60 Hz resolution.
6
Mounting Instructions (select models only)
The B127P-002-H, B127P-004-H and B127P-100-H include mounting
hardware that allows for a variety of mounting methods. The following
images illustrate how the included mounting brackets can be attached for
different installations.
Note: The model shown in the below images is for illustrative purposes only. Your
product may vary by model number, size or port orientation. The mounting options
for all over-IP units are the same.
Wall-mount
19” Rack-mount Pole-mount
7
Standard Extender/Splitter Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a higher gauge size like
26 AWG, will result in a shorter extension distance since the cable will have a
more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are
made with 24 AWG solid-wire cabling.
3) The installation diagram shows the B127P-004-H local transmitter unit. The
B127P-002-H installation is the same, except there are only two remote ports
and no local port monitor.
4) External power is not required for the B127P-100-H and B127P-100-H-SR units
due to Power over Cable (PoC) technology incorporated in the transmitter units.
B127P-004-H extender kit
B127P-100-H-SR
B127P-100-H
B127P-100-H
B127P-004-H
B127P-100-H-SR
HDR PLAYER
OPTIONAL
LOCAL MONITOR
Up to 125 ft. (38 m) Cat6 cable at 4K/60Hz
Up to 50 ft. (15 m) Cat6 cable at 4K/60Hz
Up to 15 ft. (5 m) HDMI 2.0 cable at 4K/60Hz
Up to 16 ft. (5 m) HDMI 1.4 cable at 1080p/60Hz
1 3
2 4
8
Standard Extender/Splitter Installation
1. Make sure all equipment in the installation—such as TVs, Blu-ray
players and the transmitter—is powered OFF.
2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the HDMI source to the INPUT
port on the B127P-002-H or B127P-004-H.
3. Optional for B127P-004-H: Using an HDMI 2.0 cable (such as
Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect an
HDMI monitor to the LOCAL port on the B127P-004-H unit.
4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit
to the RJ45 port on the remote receiver unit.
5. Repeat Step 4 for each additional remote unit being connected.
6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or
P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI
port to a monitor.
7. Turn the power on to your connected TVs/monitors. The LOCAL
(orange) LED will illuminate to indicate the local port has been
connected to a display.
8. Connect the external power supply to the local transmitter unit, and
plug it into an available wall outlet or (optional) a Tripp Lite Surge
Protector, Power Distribution Unit (PDU) or Uninterruptible Power
Supply (UPS). The POWER (green) LED on the local transmitter unit
will illuminate to indicate the unit is receiving power from the external
power supply. The POWER (green) LED on the remote receiver unit
will illuminate to indicate the unit is receiving power from the local
transmitter unit through PoC technology.
9. Turn on the power to the HDMI source. The OUTPUT (orange) LED
on the local transmitter unit illuminates to indicate a signal is being
received from the source. Additionally, the OUTPUT (orange) LED will
illuminate for each port signal connection.
9
Standard Extender/Splitter Installation
10. The (orange) RJ45 LED will illuminate on both local transmitter and
remote receiver units to indicate a signal is being received from
source to display. The screen should now display on the connected
monitor(s).
Extender/Splitter Daisy-Chain
Installation
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a higher-gauge size like
26 AWG, will result in a shorter extension distance since the cable will have a
more limited transmission capability. All Tripp Lite N202-Series Cat6 cables are
made with 24 AWG solid-wire cabling.
3) Using the B127P-100-H, a 4K/60Hz signal can be extended up to 125 ft. (38 m)
from the source. Using a B127P-100-H-SR, a 4K/60Hz signal can be extended
up to 50 ft. (15 m) from the source.
10
Level 1
Level 2
Level 3
OPTIONAL
LOCAL
MONITOR
HDR PLAYER
B127P-004-H
B127P-004-H
B127P-004-H
Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz
Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz
Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz
Up to 6 ft. (1.8 m) HDMI 2.0 cable at 4K/60 Hz
1
3
2
4
Extender/Splitter Daisy-Chain
Installation
Ce manuel convient aux modèles suivants
3
Table des matières
Langues :
Autres manuels Tripp Lite Émetteur
Manuels Émetteur populaires d'autres marques
Dejero
Dejero EnGo 3x Manuel utilisateur
Rosemount
Rosemount 4600 Manuel utilisateur
Speaka Professional
Speaka Professional 2342740 Manuel utilisateur
trubomat
trubomat GAB 1000 Manuel utilisateur
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manuel utilisateur
Rondish
Rondish UT-11 Manuel utilisateur
