Triplett PR400 Manuel utilisateur

User Manual

PR400

Phase Rotation Tester

Introduction

Congratulations on your purchase of the Triplett PR400 Phase Rotation Tester. This handheld

instrument detects the phase rotation of three-phase systems. Color-coded test leads are

provided for connecting to the three mains phases of the system under test.

Safety

International Safety Symbols

•Caution! Refer to the explanation in this Manual

Caution! Risk of electric shock

Earth (Ground)

Double Insulation or Reinforced insulation

AC, Alternating Current or Voltage

DC, Direct Current or Voltage

Safety Procedures

To avoid possible electric shock or fire, observe the following:

Read the following information carefully before using or servicing the instrument.

Adhere to local and national safety codes.

Individual protective equipment must be used to prevent shock and injury.

Use of instrument in a manner not specified by the manufacturer may impair safety

features/protection provided by the equipment.

Avoid working alone.

Inspect the test leads for damaged insulation or exposed metal. Check test lead continuity. Damaged

leads must be replaced. Do not use the phase Rotation indicator if it appears damaged.

Use care when working above 30V ac rms, 42V ac peak and 60V dc. Such voltages pose a shock

hazard.

When using the probes, keep fingers away from probe contacts. Keep fingers behind the finger guards on

the probes.

Measurements can be adversely affected by impedances of additional operating circuits connected

in parallel or by transient currents.

Verify operation prior to measuring hazardous voltages (voltages above 30V ac rms, 42V ac peak and

60V dc).

Do not use the phase Rotation indicator with any of the parts removed.

Do not use the phase Rotation indicator around explosive gas, vapor, or dust.

Do not use the meter in a wet environment.

Operation

Determine Phase Rotation Direction

1. Connect the supplied color-coded test leads to the meter’s test lead

input jacks at the top of the meter.

2. Connect the test probes to the three mains phases for the system under

test.

3. L1, L2, and L3 indicators will illuminate one at a time, on the

meter’s LCD display, as each phase is connected.

4. The clockwise and counter-clockwise arrows with the left ‘L’ or right ‘R’

icons display the phase rotation direction of the device under test.

Note: The rotational arrow indicators illuminate even if one of the test

probes is connected to a neutral or ground conductor instead of one of

the mains phases.

Specifications

Nominal Voltage

40 to 600 VAC

Current pickup

1 mA

Nominal Test current

( per phase)

1 mA

Maximum Operating

Voltage

600 V

Operating

Temperature

32 to 104oF (0 to 40oC)

Type of protection

IP 40

Dimensions

(H x W x D): 5.1 x 2.7 x 1.3”(130 x 69 x 32mm)

Weight

4.6 oz (130g)

Approvals

CE (EU directives)

Safety

For indoor use and in accordance with the

requirements for double

insulation to IEC1010-1 (1995): EN61010-1 (1995)

Overvoltage Category CAT III-600V

Warranty Information

Triplett / Jewell Instruments extends the following warranty to the original purchaser of

these goods for use. Triplett warrants to the original purchaser for use that the products sold

by it will be free from defects in workmanship and material for a period of (1) one year from

the date of purchase. This warranty does not apply to any of our products which have been

repaired or altered by unauthorized persons in any way or purchased from unauthorized

distributors so as, in our sole judgment, to injure their stability or reliability, or which have

been subject to misuse, abuse, misapplication, negligence, accident or which have had the

serial numbers altered, defaced, or removed. Accessories, including batteries are not

Table des matières

Autres manuels Triplett Instrument de mesure

Triplett

Triplett GSM250 Manuel utilisateur

Triplett

Triplett RHT45 Manuel utilisateur

Triplett

Triplett TA150 Manuel utilisateur

Triplett

Triplett GSM120 Manuel utilisateur

Triplett

Triplett EM400 Manuel utilisateur

Triplett

Triplett RFT10 Manuel utilisateur

Triplett

Triplett AM320-NIST Manuel utilisateur

Triplett

Triplett 9325 Manuel utilisateur

Triplett

Triplett RHT02 Manuel utilisateur

Triplett

Triplett WireMAster Coax BNC Manuel utilisateur

Triplett

Triplett TMP230 Manuel utilisateur

Triplett

Triplett CM600 Manuel utilisateur

Triplett

Triplett MS300 Manuel utilisateur

Triplett

Triplett CM1070 Manuel utilisateur

Triplett

Triplett AM320 Manuel utilisateur

Triplett

Triplett ET400 Manuel utilisateur

Triplett

Triplett EPC175 Manuel utilisateur

Triplett

Triplett CM1050 Manuel utilisateur

Triplett

Triplett 2030-C Manuel utilisateur

Triplett

Triplett LT68 Manuel utilisateur

Triplett

Triplett UTG300 Manuel utilisateur

Triplett

Triplett MS120 Manuel utilisateur

Triplett

Triplett CM400 Manuel utilisateur

Triplett

Triplett VCT1000 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur