TRENDnet TEG-160WS Manuel utilisateur
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
TEG-160WS
Version 02.04.2005
16-port 10/100/1000Mbps Copper Gigabit Smart Switch (Rack Mount)
Quick Installation Guide
Guide d'installation rapide
Commutateur intelligent Gigabit cuivre 10/100/1000Mbps à 16 ports
16-Port 10/100/1000 MBit/s Kupfer-Gigabit Smart-Switch
Kurzanleitung zur Installation
Guía de instalación rápida del c
onmutador Gigabit Copper de 16 puertos a 10/100/1000 Mbps
Table of Contents
English ......................................................................................................
Troubleshooting ........................................................................................
1
1
2
3
4
5
10
1. Prepare for Installation ......................................................................
2. Product Detail ....................................................................................
3. Hardware Installation .........................................................................
4. Verify Installation ...............................................................................
5. Configuring the TEG-160WS ............................................................
Thank you for purchasing the TRENDnet's TEG-160WS 16-port
10/100/1000Mbps Copper Gigabit Smart Switch (Rack Mount).
This guide will help you to install and configure the TEG-160WS. Installation
should be easy and trouble-free. If you experience any problems, please refer
to the Troubleshooting section. If you need further technical assistance, please
visit www.TRENDNET.com or contact technical support by phone.
Verify Package Contents
Please make sure you have everything in the box:
1
1. Prepare for Installation
English QIG
English
Minimum System Requirements
Before setting up the TEG-160WS, you should have the following:
1. Workstations with network cards
2. TCP/IP protocol installed in all workstations
3. A web browser such as Internet Explorer or Netscape Navigator
4. A RJ-45 Network Cable to connect your workstations to the TEG-160WS
TEG-160WS
AC Power Cord
Quick Installation Guide
Rubber Cushions: 4
Driver CD-ROM
Two Mounting brackets
with screws
Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
TEG-160WS
Version 02.04.2005
16-port 10/100/1000Mbps Copper Gigabit Smart Switch (Rack Mount)
Quick Installation Guide
Guide d'installation rapide
Commutateur intelligent Gigabit cuivre 10/100/1000Mbps à 16 ports
16-Port 10/100/1000 MBit/s Kupfer-Gigabit Smart-Switch
Kurzanleitung zur Installation
Guía de instalación rápida del c
onmutador Gigabit Copper de 16 puertos a 10/100/1000 Mbps
2
2. Product Detail
The TEG-160WS has sixteen 10/100/1000 Mbps ports that support auto
negotiation and auto-MDIX. It also has LED's that indicate power, CPU
activity, network speed, and network activity.
English
LED Display 16 Gigabit Ports
3
3. Hardware Installation
English
Please keep in mind that the site where you install the TEG-160WS may
greatly affect its performance. Refer to the User's Guide in the provided CD-
ROM for optimal installation.
1. Connect AC Power cord to the back of the TEG-160WS.
2. Press the power button to turn on the TEG-160WS.
3. Using a RJ-45 network cable (CAT 5 cable), connect your workstation to the
TEG-160WS.
Note: If you would like to verify the TEG-160WS has been properly
installed, please go to the Verify Installation section.
Congratulations!
Installation is now complete.
1
2
4English
Verify the following LED display:
1. Make sure that the power LED is on.
2. Verify that the System LED is blinking.
3. Verify that the connected workstation has the Link/Act LED on and a network
LED on.
4. Verify Installation
Power
Link/Act
System Network
5English
5. Configuring the TEG-160WS
Note: For MAC Users, change your computers IP address to
192.168.0.X (where X is an available number from 1-253), and enter
192.168.0.1 in your web browser to access the TEG-160WS Web
Utility.
For Windows Users
1. Insert the TEG-160WS CD-ROM into your computer's CD-ROM drive.
2. Double-click My Computer on your desktop, double-click CD-ROM, double-
click Web-Management Utility, and double click Setup.
6English
3. Click Next.
4. Click Next.
5. Click Next.
7English
6. Click Next.
7. Check Run web_management_utility. Click OK.
8English
8. Click Discovery, Click the TEG-160WS, and Click Configuration Setting.
9. In the Configuration window, type in IP Address and Gateway that applies
to your network segment, and type admin as your password. Click Set.
10. Click OK.
Autres manuels pour TEG-160WS
8
Autres manuels TRENDnet Changer
TRENDnet
TRENDnet TU2-700 - DATA SHEETS Manuel utilisateur
TRENDnet
TRENDnet TK-200K Manuel utilisateur
TRENDnet
TRENDnet TK-208K Manuel utilisateur
TRENDnet
TRENDnet TEG-S5g - Gigabit GREENnet Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-S2500i Manuel utilisateur
TRENDnet
TRENDnet TL2-G448 Manuel utilisateur
TRENDnet
TRENDnet TK-400K - DATA SHEETS Manuel utilisateur
TRENDnet
TRENDnet TK-209i Manuel utilisateur
TRENDnet
TRENDnet TEG-40080ES Manuel utilisateur
TRENDnet
TRENDnet TE100-S5 Manuel utilisateur
TRENDnet
TRENDnet TE100-S16Eplus Manuel utilisateur
TRENDnet
TRENDnet TO-PG541 Manuel utilisateur
TRENDnet
TRENDnet TEG-S4000 Manuel utilisateur
TRENDnet
TRENDnet TEG-S80Dg Manuel utilisateur
TRENDnet
TRENDnet TE100-DX16Rplus Manuel utilisateur
TRENDnet
TRENDnet TEG-S18TXE Manuel utilisateur
TRENDnet
TRENDnet TEG-S80g - Switch Manuel utilisateur
TRENDnet
TRENDnet TEG-S80TXE - Copper Gigabit Switch Manuel utilisateur
TRENDnet
TRENDnet TE100-S32plus Manuel utilisateur
TRENDnet
TRENDnet TU-400E Manuel utilisateur
