TRENDnet TV-IP315PI Manuel utilisateur

TV-IP315PI

Quick Installation Guide

Table of Content

1 English

1. Before You Start

2. Hardware Installation and Configuration

1. Before You Start

Package Contents

ŸTV-IP315PI

ŸCD-ROM (Utility and User's Guide)

ŸQuick Installation Guide

ŸMounting kit

Minimum Requirements

ŸPower over Ethernet (PoE) switch (e.g. TPE-TG80g) or PoE Injector (e.g. TPE-113GI)

ŸA networked computer and web browser

ŸWired network

ŸNetwork cable

Note:

ŸThe TV-IP315PI only works with Power over Ethernet (PoE) devices that follow the IEEE

802.3af standard.

ŸThe TV-IP315PI has a 5.5 mm barrel connector for an optional 12 V DC 1A power adapter.

ŸOptional Power Supply (not included).

TRENDnetVIEW Pro Requirements

Supported Operating

Systems

1-8 Cameras

CPU CPU

9-32 Cameras

Memory Memory

Windows 10/

Windows 8.1/

Windows 8 /

Windows 7/

Windows Server 2008

2 GHz 2 GHz2 GB RAM

or above

4 GB RAM

or above

2. Hardware Installation and Configuration

1. Do not install or mount the IP camera until after you complete the installation steps below.

Temporarily place the IP camera next to your computer.

2. Insert the Utility CD-ROM into your CD-ROM drive.

3. Select language from the drop down menu.

4. Click Install Camera.

5. Write down the MAC address of your camera. Then click Next.

6. Connect a network cable from the camera's network port to your PoE source The IR LEDs will

turn on and show a dim visible red light. Allow 60 seconds for the camera to boot up. Then click

Next.

7. Select your camera. Click Next and follow the instructions.

8. Select DHCP option to assign an IP by DHCP server, select “Fixed IP” to set IP address

manually. Click Next.

9. If you select “Fixed IP”, fill out the IP address, subnet mask, default gateway, and DNS server.

Please ensure that the IP address of the camera and the computer must be within the same

network. Click Next.

10. Select Change Password. Enter a new password, confirm the new password and then click

Next.

12. Congratulations! Your camera is now ready to be installed in its final location. Scan the QR

code to download a free mobile app to view the camera from your mobile device. Click Finish

to exit the installation wizard.

11. Initial Setup is complete! Your camera is now connected to your network. Click the hyperlink

to confirm access to the management page. This will open up a web browser. To resume

installation, minimize the web browser and then click Next.

Finish

13. To manage multiple cameras and for more advanced features, please install the

TRENDnetVIEW Pro software. Install the software by clicking Install TRENDnetVIEW Pro

Software in the Autorun window and refer to the TRENDnetVIEW Pro User's Guide on the CD

for more information.

Note

ŸSee User's Guide for advanced management functions

ŸTwo User's Guides are included – one for the camera and one for the complimentary

management software.

Using the TV-IP315PI with a PoE switch (TPE-TG80g)

ŸBefore mounting the camera, the lens must be manually positioned and focused.

ŸConnect a network cable from the Power over Ethernet switch (e.g. TPE-TG80g) to the

network port on the IP Camera.

ŸConnect the switch to your network.

TPE-TG80g

PoE

Internet

TV-IP-315PI

14. Install the camera in your desired location. To connect the IP camera to your network with

PoE, please use either of the following examples:

Non-PoE

TPE-113GI

DATA

PWR+DATA

OUT

Non-PoE

PoE

ŸConnect the power adapter to the TPE-113GI and then to a power outlet.

ŸConnect a network cable from the TV-IP315PI to the TPE-113GI's PWR+DATA OUT (PoE)

port.

ŸConnect a network cable from a switch or router (e.g. TEW-818DRU) to the TPE-113GI's

DATA IN (Non-PoE) port.

Using the TV-IP315PI with an Injector (TPE-113GI)

TV-IP-315PI

Internet

Autres manuels pour TV-IP315PI

Table des matières

Autres manuels TRENDnet Caméra de sécurité

TRENDnet

TRENDnet TV-IP310PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP201P Manuel utilisateur

TRENDnet

TRENDnet TV-IP343PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP460PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP612P Manuel utilisateur

TRENDnet

TRENDnet TV-IP551WI Manuel utilisateur

TRENDnet

TRENDnet TV-IP322WI Manuel utilisateur

TRENDnet

TRENDnet TV-IP314PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP341PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP300 Manuel utilisateur

TRENDnet

TRENDnet TV-IP100W Manuel utilisateur

TRENDnet

TRENDnet TV-IP612WN Manuel utilisateur

TRENDnet

TRENDnet TV-IP212W - Wireless Internet Camera Server Manuel utilisateur

TRENDnet

TRENDnet TV-IP400 Manuel utilisateur

TRENDnet

TRENDnet TV-IP300 Manuel utilisateur

TRENDnet

TRENDnet TV-IP400W - Wireless Advanced Pan Manuel utilisateur

TRENDnet

TRENDnet TV-IP522P Manuel utilisateur

TRENDnet

TRENDnet TV-IP301W Manuel utilisateur

TRENDnet

TRENDnet TV-IP340PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP410PI Manuel utilisateur

TRENDnet

TRENDnet TV-IP400 Manuel utilisateur

TRENDnet

TRENDnet TV-IP110WN Manuel utilisateur

TRENDnet

TRENDnet TV-IP312 Manuel utilisateur

TRENDnet

TRENDnet TV-IP301 - ProView Advanced Day/Night Internet Surveillance... Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur