Transition Networks Mil-sm8dpa Manuel

Read Me First

MIL-SM8DPA Packing List:

Before you start installing MIL-SM8DPA Managed Switch, please verify that the package

contains the following items:

6-Port 100/1000 Dual Speed SFP + 2-Port RJ-45/ 100/1000SFP Managed Switch

AC Power Cord

User’s Guide CD-ROM

RJ-45 Transform RS-232 Cable

Please notify your sales representative immediately if any of the aforementioned items is

missing or damaged.

Power Requirements: AC Line

Voltage : 100240 VAC

Frequency : 5060 Hz

Consumption : 40W

Quick Installation:

1. Install the switch in the rack with mounting accessory.

2. Connect the MIL-SM8DPA switch to an AC power source.

3. The port 1–8 connector is LC SFP on the switch. Use Single-mode or Multi-mode Fiber

cable to connect between MIL-SM8DPA and end station.

4. The port 7, 8 includes two types of media --- TP and (100/1000M) SFP fiber module; they

support TP or fiber with auto-detected function.

5. Use RJ-45 interface to pre-configure MIL-SM8DPAfor network management.

For example: IP address, VLAN, Port Trucking, STP, etc.

MIL-SM8DPA switch’s serial port default settings are listed as follows:

Baud rate 115,200

Stop bits 1

Data bits 8

Parity N

Flow control none

The default values of MIL-SM8DPA switch are as follows:

IPAddress : 192.168.1.77

Subnet Mask : 255.255.255.0

Default Gateway : 192.168.1.254

Username : admin

Password : root

User also can use telnet or web to pre-configure MIL-SM8DPA with the default IP

address and username/password in the first configuration. Please refer to User’s Guide

contained in CD-ROM for details on the setting of parameters. MIL-SM8DPA user’s

manual is filed under the path: \manual of the CD-ROM.

MIL-SM8DPA

ReadMe First

Date: March 20

Revision A

Warning:

Self-demolition on Product is strictly prohibited. Damage caused by self-demolition will

be charged for repairing fees.

Do not place product at outdoor or sandstorm.

Before installation, please make sure input power supply and product specifications are

compatible to each other.

The SSL only provide the CLI for switch management and SSH default

enable without UI for management.

The TACACS+ feature for management authentication purpose.

Before importing / exporting configuration please make sure the firmware

version is always the same.

After firmware upgrade, the switch will remove the configuration

automatically to latest firmware version.

10900 Red Circle Drive

Minnetonka, MN 55344

Tel.: +1.952.941.7600

[email protected]

Autres manuels pour mil-sm8dpa

Table des matières

Autres manuels Transition Networks Changer

Transition Networks

Transition Networks SESPM1040-541-LT Series Manuel utilisateur

Transition Networks

Transition Networks SISPM1040-3 L Series Manuel utilisateur

Transition Networks

Transition Networks LAN MASTER 33022.B Manuel utilisateur

Transition Networks

Transition Networks SM12DP2XA Manuel utilisateur

Transition Networks

Transition Networks SISTP1040-382B-LRT Manuel utilisateur

Transition Networks

Transition Networks Milan MIL-SM2401MAF Manuel utilisateur

Transition Networks

Transition Networks E-FX-HB-0800 Manuel utilisateur

Transition Networks

Transition Networks SISPM1040-384-LRT-C Manuel utilisateur

Transition Networks

Transition Networks SESPM1040-541-LT Series Manuel utilisateur

Transition Networks

Transition Networks mil-sm8dpa Manuel utilisateur

Transition Networks

Transition Networks SM8TAT2SA Mode d’emploi

Transition Networks

Transition Networks E-TBT-HB-0402 Manuel utilisateur

Transition Networks

Transition Networks SM8TAT2SA-DC Manuel utilisateur

Transition Networks

Transition Networks SISTF1010-180-LRT Manuel utilisateur

Transition Networks

Transition Networks SM TAT4X Series Manuel utilisateur

Transition Networks

Transition Networks SISTM1040-262D-LRT-B Instructions d'utilisation et d'entretien

Transition Networks

Transition Networks SISPM1040-362-LRT Manuel utilisateur

Transition Networks

Transition Networks SM24T6DPA Manuel utilisateur

Transition Networks

Transition Networks SISGM1040-284-LRT Manuel utilisateur

Transition Networks

Transition Networks SISPM1040-582-LRT Manuel utilisateur

Transition Networks

Transition Networks STACKMASTER TX12 Manuel utilisateur

Transition Networks

Transition Networks SISTG1040-242-LRT Manuel utilisateur

Transition Networks

Transition Networks STACKMASTER TR SMHB-TR-16 Manuel utilisateur

Transition Networks

Transition Networks SM16TAT2SA Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur