Transition Networks SISTM1040-262D-LRT-B Instructions d'utilisation et d'entretien

SISTM1040-262D-LRT-B Quick Start Guide

Package Contents

•SISTM1040-262D-LRT-B Hardened 18 Port Switch

•Wall Mount Bracket

•Quick Start Guide

•Console DB-9 to RJ45 Cable

•6-Pin Terminal Block Power Connector

Redundant Power Inputs

The switch has two 12-48VDC power inputs, power input 1 and

power input 2. Positive and negative terminals are labeled V+ and

V- for each input. Note polarity on the chassis of the switch.

Suitable wire sizes to use for the power connection are

12~22AWG. 16AWG or 18AWG is preferred. Connect wires

between the + terminals on the power supply and the +terminals

on the switch terminal block. Do the same with the –terminals.

Maintain correct polarity. Ensure the screws are tight and the

wires secure.

Chassis Ground

There is a chassis ground screw that can be used to ground the

device enclosure. Only negative grounding should be used.

Device Configuration

The SISTM1040-262D-LRT-B switch can be controlled via a built-in web server which supports Internet

Explorer (IE 5.0 or above versions) and other Web browsers such as FireFox and Chrome. Note: By default,

IE5.0 or later version do not allow Java applets to open sockets. You must modify the browser setting

separately in order to enable Java applets for network ports.

Management via Web Browser

Default values:

IP Address: 192.168.1.77

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.254

1. Launch your Web browser.

2. Type http://192.168.1.77 into the address bar

and press Enter. The login screen displays.

3. Type in Username: root Password: root.

4. Click Enter or OK button.

The main management page displays.

Basic Settings/IP Settings – Set IP Address:

You can enable DHCP by checking the box to

automatically obtain an IP address, or manually enter

static IP address information. Click Apply and the new

values will be applied and displayed.

Reset to Factory Defaults

On the front of the device, under the console port is a

hole to access the reset button. Use a paper clip to

press and hold the reset button for 5 seconds. The

LEDs on the switch will flash and the setting will be

returned to factory defaults.

For more information contact Transition Networks at:

800.526-9267 or visit us online: www.transition.com.

Autres manuels Transition Networks Changer

Transition Networks

Transition Networks Milan MIL-SM2401MAF Manuel utilisateur

Transition Networks

Transition Networks SISGM-CHAS L2 Manuel utilisateur

Transition Networks

Transition Networks LANMaster T8 Manuel utilisateur

Transition Networks

Transition Networks E-TBT-HB-1004 Manuel utilisateur

Transition Networks

Transition Networks E-PSW-TX-02 Manuel utilisateur

Transition Networks

Transition Networks mil-sm8dpa Manuel utilisateur

Transition Networks

Transition Networks SM TAT4X Series Manuel utilisateur

Transition Networks

Transition Networks SISTP1040-382B-LRT Manuel utilisateur

Transition Networks

Transition Networks SISPM1040-582-LRT Manuel utilisateur

Transition Networks

Transition Networks SM24-1000SFP-AH Manuel utilisateur

Transition Networks

Transition Networks SISTP1040-382B-LRT Manuel utilisateur

Transition Networks

Transition Networks SISTF1010-180-LRT Manuel utilisateur

Transition Networks

Transition Networks LAN MASTER 33022.B Manuel utilisateur

Transition Networks

Transition Networks SISTF10xx-130-LR(T) Manuel utilisateur

Transition Networks

Transition Networks MIL-S2400S Manuel utilisateur

Transition Networks

Transition Networks SISTG1040-242-LRT Manuel utilisateur

Transition Networks

Transition Networks SISPM1040-3166-L Manuel utilisateur

Transition Networks

Transition Networks SM24TBT2DPA Manuel utilisateur

Transition Networks

Transition Networks SM TAT4X Series Manuel utilisateur

Transition Networks

Transition Networks SM24DPa Manuel utilisateur

Transition Networks

Transition Networks SM8TAT2SA Manuel utilisateur

Transition Networks

Transition Networks SM12DP2XA Manuel utilisateur

Transition Networks

Transition Networks SM24-100SFP-AH Manuel utilisateur

Transition Networks

Transition Networks LANMaster T8-FL Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur