Tork EW101B Manuel utilisateur

EW101B single 7/25/07 11:45 AM Page 1

TABLE OF CONTENTS

Section Page

Installation Instructions and

Capabilities . . . . . . . . . . . . . . . . . . . . 1

Key Functions . . . . . . . . . . . . . . . . . . . . 2

1.0 Set Clock . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 To Modify Clock

(After previously Set) . . . . . . . . . . . . . 3

2.0 Set Date . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 To Modify Date

(After previously Set) . . . . . . . . . . . . . 4

3.0 Daylight Saving Time . . . . . . . . . . . . . . 4

3.1 To Modify Daylight Saving Time . . . . . . 5

4.0 Schedule ON’s, OFF’s . . . . . . . . . . . . . . 5

4.1 Setting Hours, Minutes and Days . . . . . 5

5.0 Review, Modify, Delete Schedule . . . . . 6

6.0 Manual Override . . . . . . . . . . . . . . . . . . 6

7.0 Update Status . . . . . . . . . . . . . . . . . . . . 6

8.0 Notes: Clear all memory . . . . . . . . . . . . 7

Schedule Sheets . . . . . . . . . . . . . . . . . . 8,9

EW101B single 7/25/07 11:45 AM Page 2

TORK MODEL EW101B / EW103B / EW120B

7 DAY DIGITAL TIME SWITCH

READ INSTRUCTIONS CAREFULLY BEFORE

ATTEMPTING TO ISTALL TIME SWITCH. SEE WARN-

ING ON FRONT PANEL – Failure to comply with instruc-

tions could result in personal injury and/or property

damage.

INSTALLATION:

UNIT IS TO BE INSTALLED BY A LICENSED ELECTRICIAN

1. To remove unit from enclosure: Push the tab on right

to swing unit the left and remove.

2. Mount the enclosure at eye level using screws or

other suitable fastening device. Bring supply and

load wires in through or side knockouts. DO NOT

USE TOP.

3. Reinstall unit by reversing step #1 above and con-

necting wires to units as per suggested wiring dia-

grams. See illustration and warning on back page.

CAPABILITIES

- 7 Day scheduling.

- ON and OFF set points:

Total # - 20 per day / week

- Minimum setting – 1 minute

- Capable of different schedules each day of the week

FEATURES

Daylight Saving Automatic (can be adjusted).

Leap Year Automatic compensation.

Display LCD

Manual Override Until the next schedule ON or OFF.

Automatic operation then resumes.

Power Outage Permanent schedule retention

Super capacitor maintains real

time up to 4 days.

EW101B single 7/25/07 11:45 AM Page 3

1.0 KEY FUNCTIONS:

Unit should be program with AC power. Do not

program under super cap back up power.

Mode: Press to go to the next mode.

Enter: Stores or saves current entry.

OVR:

a. Press to change the load status in the AUTO (auto-

matic) and the MAN (manual) mode.

DEL/PREV:

a. Press to deletes the displayed entry in the SCH

(schedule) mode.

b. Decrement the last selected entry.

HOUR/MONTH:

a. Press to set hour in CLK (clock) mode and the SCH

(schedule) mode.

b. Press to set month in the DATE mode and DST

(Daylight Savings Time) mode.

MINUTE/DATE:

a. Press to set minutes in CLK (clock) mode and SCH

(schedule) mode.

b. Press to set DATE in the date mode.

c. Press to select the week of the month in DST

(Daylight Savings Time).

SEC/DAY/YEAR:

a. Press to set the YEAR in the DATE mode.

b. Selects the desired day of the week in the DST

(Daylight Savings Time) mode.

c. Press to select the desired day or days in the SCH

(schedule) mode.

EVENT:

a. Press to select ON/OFF in the schedule.

b. Press to update the load status In the AUTO (auto-

matic) mode.

EW101B single 7/25/07 11:45 AM Page 4

PROGRAMMING YOUR EW101B / EW103B / EW120B

NOTE: AFTER MAKING ANY CHANGES TO THE

PROGRAM, PRESS MODE TO GO TO RUN MODE

AND THEN PRESS EVENT TO UPDATE THE

LOAD STATUS.

AT POWER UP:

When powering up the unit for the first time, allow

1-2 minutes to charge the supercap and the dis-

play will show E17 60 r - 0A, then 12:00 AM will

flash on the display.

Press the MODE key to go to the CLK mode.

After pressing the MODE key the display will

show:

1.0 TO SET CLOCK

Press HOUR and MIN to advance to the present

hour and mins. Check AM/PM, and press ENTER.

1.1 TO MODIFY CLOCK

Press MODE until the display shows: CLK. Press

HOUR and MIN. to modify clock and press ENTER.

2.0 TO SET DATE

If you are setting for the first time, display will show:

Press MONTH, DATE, and YEAR key to advance to

the desired month, date and year, then press

ENTER.

NOTE: The day of the week will be automatically

set once the date is set.

MO TU WE TH FR SA SU ASTRO

CH1 MOM AM PM OFFSET CH2

CLK DATE SCH AUTO MAN

MO TU WE TH FR SA SU ASTRO

CLK DATE SCH AUTO MAN

EW101B single 7/25/07 11:45 AM Page 5

2.1 TO MODIFY DATE

Press MODE until the display shows DATE. Press

MONTH, DATE and YEAR to modify present set-

tings and then press ENTER.

3.0 DAYLIGHT SAVING TIME

After setting or modifying the date, display will

show:

NOTE: If daylight saving time (DST) is NOT

required, press MODE, display will show:

If daylight savings is required, press ENTER, display will

show:

NOTE: Day of week will be assigned to the 1st, 2nd, 3rd

or Last (L) Sunday of the month.

Press ENTER to accept default dates (second Sunday in

March) or press MONTH, DATE, and DAY to modify DST

settings and press ENTER. The display will show:

OFF

MO TU WE TH FR SA SU ASTRO

EW101B single 7/25/07 11:45 AM Page 6

Press ENTER and the display will show:

Press ENTER to accept default dates (first Sunday in

November) or press MONTH, DATE, and DAY to modify

DST settings and press ENTER. Press MODE, the dis-

play will show:

NOTE: DST OFF indicates Daylight Savings Time was

not set.

3.1 TO MODIFY OR DELETE DAYLIGHT SAVING

TIME SETTINGS.

Press MODE until display shows:

Press MONTH, DATE and DAY to modify DST start

settings, to delete, press DEL. Press ENTER.

Press MONTH, DATE and DAY to modify DST end

settings, to delete, press DEL. Press ENTER.

Press MODE to return to AUTO mode.

4.0 SCHEDULE SET MODE

Press MODE until display shows:

4.1 SETTING HOURS, MINUTES AND DAYS

a. Press HOUR and MIN to set desired time.

MO TU WE TH FR SA SU ASTRO

OFF

MO TU WE TH FR SA SU ASTRO

CLK DATE SCH AUTO MAN

EW101B single 7/25/07 11:45 AM Page 7

b. Press EVENT to set desired event (ON/OFF).

Press DAY to select desired days and then press

ENTER. The display will show:

Follow the same procedures above to set more

schedule entries.

5.0 REVIEW, MODIFY AND DELETE

Press MODE to advance to any of the following

MODES:

1. CLOCK MODE: Press HOUR and MIN to modi-

fy existing settings. Press ENTER.

2. DATE MODE: Press MONTH, DATE and YEAR

to modify existing settings. Press ENTER. DAY is

automatically adjusted.

3. DST Daylight Saving Time: To review press

ENTER. To modify press MONTH, DAY and

DATE to change existing setting. Press ENTER.

4. SCHEDULE MODE: Press HOUR, MIN and

EVENT to modify time settings. Press DAY to

modify days, DEL to delete. Press ENTER after

each modification.

5. RUN MODE: The time, day, seconds, the load

status and AUTO is displayed.

6.0 OVERRIDE

OVR (Override) is effective in the AUTO mode and

the MANUAL mode. OVR on the AUTO mode is

effective until the next event. OVR on the manual

mode is effective indefinitely.

7.0 EVENT (in the RUN mode) key is used to update

the load status. It will execute the last scheduled

event. If there is no schedule programmed, the dis-

play will show —:—

CLK DATE SCH AUTO MAN

EW101B single 7/25/07 11:45 AM Page 8

8.0 NOTES:

1. MAN mode: Under this mode the unit disregards

the settings in the schedule mode and remains

in its manually set status ON or OFF. NOTE: To

resume regular schedule execution press the

mode key to return to AUTO mode.

2. Unit will go to RUN MODE automatically (except

on the MAN mode) if no key is pressed for five

minutes.

3. Clear all memory. All memory can be cleared

using the following procedure: While in the RUN

mode, press ENTER, display will show:

Use EVENT key to display:

Now press ENTER briefly and everything in the

timer memory will be erased, including real time

and date. NOTE: Unit has permanent memory

and will not be erased unless done through pro-

cedure above.

4. Upon powering up your EW101B/103B/120B the

display will show at what frequency the unit is

operating, 50 will determine 50Hz or 60 for

60Hz. NOTE: While in the AUTO mode, if AC

power is absent, the display will show a PF

(power failure) instead of the seconds scrolling

up.

5. A “Lo” on the display indicates that the super cap

has run low and the unit needs to be powered

with AC. A minimum of 8 hours is required to fully

charge the super cap.

OFF

CLK DATE SCH AUTO MAN

OFF

CLK DATE SCH AUTO MAN

EW101B single 7/25/07 11:45 AM Page 9

NOTE: AFTER MAKING ANY CHANGES TO THE

PROGRAM, PRESS MODE TO GO TO RUN

MODE AND THEN PRESS EVENT TO UPDATE

THE LOAD STATUS.

SUSAFRTHWETU

Sch.# OFFONTimeLoad Description MO

EW101B single 7/25/07 11:45 AM Page 10

Autres manuels pour EW101B

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tork Minuteur

Manuels Minuteur populaires d'autres marques

Intermatic

Intermatic P1131 Manuel utilisateur

Learning Resources

Learning Resources Time Tracker mini Manuel utilisateur

CEBEK

CEBEK I-215 Manuel utilisateur

Somogyi

Somogyi home TS MD 5 Manuel utilisateur

Profile

Profile 010200280 Manuel utilisateur

Gizmo

Gizmo T4 Manuel utilisateur

Tekmar

Tekmar Timer 031 Manuel utilisateur

Daikin

Daikin DST301B61 Manuel utilisateur

sisel

sisel ENDA ETM2432 Manuel utilisateur

B&Q

B&Q TE103 Manuel d'utilisation et d'entretien

Hozelock

Hozelock AC Plus 2700 Manuel utilisateur

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Manuel utilisateur

Emos

Emos EMT400F Manuel utilisateur

FarmTek

FarmTek Polaris Manuel utilisateur

Maximum

Maximum CRONUS Manuel utilisateur

Uberhaus

Uberhaus TD133B Manuel utilisateur

Clas Ohlson

Clas Ohlson 31-3766 Manuel utilisateur

Gewiss

Gewiss 90 AM Series Manuel utilisateur