Tork E101B Manuel utilisateur

E101B SINGLE 7/22/07 10:02 PM Page 1

MLI-203(REVA)

http://waterheatertimer.org/Tork-Digital-timers-and-manuals.html

TABLE OF CONTENTS

Section Page

Installation Instructions and

Capabilities . . . . . . . . . . . . . . . . . . . . 1

Key Functions . . . . . . . . . . . . . . . . . . . . 2

1.0 To Set The Clock . . . . . . . . . . . . . . . . . . 3

1.1 To Modify Clock . . . . . . . . . . . . . . . . . . 3

(After previously Set)

2.0 To Set Date . . . . . . . . . . . . . . . . . . . . . . 3

2.1 To Modify Date . . . . . . . . . . . . . . . . . . . 4

(After previously Set)

3.0 Daylight Saving Time . . . . . . . . . . . . . . 4

3.1 Modify Daylight Saving Time . . . . . . . . . 5

4.0 Scheduling ONs, OFFs . . . . . . . . . . . . . 5

5.0 Review, Modify, Delete schedules . . . . . 6

6.0 Manual Override . . . . . . . . . . . . . . . . . . 6

7.0 Clear All Memory . . . . . . . . . . . . . . . . . 7

Blank Schedule sheets . . . . . . . . . . . . . 8

E101B SINGLE 7/22/07 10:02 PM Page 2

TORK MODELS E101B / E103B / E120B

24 HOUR DIGITAL TIME SWITCH

READ INSTRUCTIONS CAREFULLY BEFORE

ATTEMPTING TO INSTALL TIME SWITCH. SEE

WARNING ON FRONT PANEL – Failure to comply

with instructions could result in personal injury and/or

property damage.

INSTALLATION:

UNIT IS TO BE INSTALLED BY A LICENSED ELECTRICIAN

1. To remove unit from enclosure: Push the tab on right

to swing unit the left and remove.

2. Mount the enclosure at eye level using screws or

other suitable fastening device. Bring supply and load

wires in through or side knockouts. DO NOT USE

TOP.

3. Unit should be programmed with AC power only and

not while on super cap back up power.

4. Reinstall unit by reversing step #1 above and con-

necting wires to units as per suggested wiring dia-

grams. See illustration and warning on back page.

5. To reset the timer, insert a paperclip on the small hole

next to the EVENT key. This procedure will allow you

to reset the time but will not clear the memory.

CAPABILITIES

- 24 Hour Day scheduling.

- ON and OFF set points

Total # - 20 per day

- Minimum setting: 1 minute

FEATURES

Daylight Saving Automatic (can be adjusted).

Leap Year Automatic compensation.

Display LCD

Manual Override Until the next schedule ON or OFF.

Automatic operation then resumes.

Power Outage Permanent schedule retention.

Supercapacitor maintains real time

up to 4 days.

E101B SINGLE 7/22/07 10:02 PM Page 3

KEY FUNCTIONS:

Unit should be program with AC power. Do not pro-

gram on super cap back up power.

Mode: Press to go to the next mode.

Enter: Stores or saves current entry.

DAY/YEAR:

a. Press to set the year in the DATE mode.

b. Selects the desired day of the week in the DST

(Daylight Savings Time) mode.

OVR:

a. Press to change the load status in the AUTO (auto-

matic) and the MAN (manual) mode.

DEL/PREV:

a. Press to delete the displayed entry.

b. Decrement the last selected entry.

HOUR/MONTH:

a. Press to set hour in CLK (clock) mode and the SCH

(schedule) mode.

b. Press to set month in the DATE mode and DST

(Daylight Savings Time) mode.

MINUTE/DATE:

a. Press to set minutes in CLK (clock) mode and SCH

(schedule) mode.

b. Press to set date in the DATE mode.

c. Press to select the week of the month in DST

(Daylight Savings Time).

ENTER:

a. Press to store the displayed information into memory.

Information will not be stored until the ENTER key

is pressed.

Note: During settings, each press of the key will

advance one number. For rapid advance hold key in.

EVENT:

a. Press to select ON/OFF in the schedule.

b. Press to update the load status In the AUTO (auto-

matic) mode.

E101B SINGLE 7/22/07 10:02 PM Page 4

PROGRAMMING YOUR E101B / E103B / E120B

NOTE: AFTER MAKING ANY CHANGES TO THE

PROGRAM, PRESS MODETO GO TO RUN

MODE AND THEN PRESS EVENT TO UPDATE

THE LOAD STATUS.

AT POWER UP:

When powering up the unit for the first time,

12:00 will flash on the display. NOTE: Allow 1-2

minutes for the supercap to charge before any

display is shown.

Press the MODE key to go to the CLK mode. After

pressing the MODE key the display will show:

1.0 TO SET CLOCK

Press HOUR and MIN to advance to the present

hour and mins. Check AM/PM, and press ENTER.

1.1 TO MODIFY CLOCK

Press MODE until the display shows: CLK. Press

HOURand MIN.to modify clock and press

ENTER.

2.0 TO SET DATE

If you are setting for the first time, display will

show:

MO TU WE TH FR SA SU ASTRO

CH1 MOMAMPM OFFSET CH2

CLK DATE SCH AUTO MAN

MO TU WE THFR SA SU ASTRO

CLKDATE SCH AUTO MAN

E101B SINGLE 7/22/07 10:02 PM Page 5

Press MONTH, DATE, and YEAR key to advance

to the desired Month, date and year, then press

ENTER.

NOTE: The day of the week will be automatically

set once the date is set.

2.1 TO MODIFY DATE

Press MODE until the display shows DATE. Press

MONTH, DATE and YEAR to modify present set-

tings and then press ENTER.

E101B SINGLE 7/22/07 10:02 PM Page 6

OFF

3.0 DAYLIGHT SAVING TIME

After setting or modifying the date, display will

show:

OFF

For standard USA daylight savings (DSt), press MODE

then go to step 4.0. For dates other than standard USA

dates, press MONTH and go to step 3.1. If daylight

saving time (DSt) is NOT required, press DEL display

will show:

Press ENTER then go to step 4.0.

4.0 SCHEDULE SET MODE

Press MODE until display shows:

CLKDATE SCH AUTO MAN

E101B SINGLE 7/22/07 10:02 PM Page 7

3.1 TO MODIFY STANDARD USA

DAYLIGHT SAVINGS DATES

MO TU WE TH FR SA SU ASTRO

Press MONTH and DATE, to modify S (starting) DST

settings. NOTE: DATE will choose the week of the month

to be assigned. Choices are 01 (1st), 02 (2nd), 03 (3rd)

or L (Last) week of the month. The default day in SU

(Sunday). Pressing DAY changes default day. EXAMPLE:

04:01 SU S represents the first Sunday in April.

Press ENTER and the display will show:

MO TU WE TH FR SASUASTRO

Press MONTH and DATE, to modify E (ending) DST

settings. NOTE: DATE will choose the week of the

month to be assigned. Choices are 01 (Ist), 02 (2nd),

03 (3rd) or L (Last) week of the month. The default day

is SU (Sunday). Pressing DAY changes default day.

EXAMPLE: 10:L SU E represents last Sunday in

October.

Press ENTER and the display will show the modified

DSt starting date.

Press MODE to go to step 4.0.

4.1 SETTING HOURS AND MINUTES

Press HOUR and MIN to set desired time. Press

EVENT to set desired event (ON/OFF) and then

press ENTER. The display will show:

Follow the same procedures above to set more

schedule entries.

5.0 REVIEW, MODIFY AND DELETE

Press MODE to advance to any of the following

MODES:

1. CLOCK MODE: Press HOUR and MIN to mod-

ify existing settings. Press ENTER.

2. DATE MODE: Press MONTH, DATE and YEAR

to modify existing settings. Press ENTER. DAY

is automatically adjusted.

3. DST Daylight Saving Time: To review press

ENTER. To modify press MONTH, DATE and

DAY to change existing setting. Press ENTER.

4. SCHEDULE MODE: Press HOUR, MIN and

EVENT to modify time settings. Press DEL to

delete. Press ENTER after each modification.

5. RUN MODE: The time, day, seconds, the load

status and AUTO is displayed.

6.0 OVERRIDE

OVR (Override) is effective in the AUTO mode

and the manual mode. OVR on the AUTO

mode is effective until the next event. OVR on

the manual mode is effective indefinitely.

CLK DATE SCH AUTO MAN

E101B SINGLE 7/22/07 10:02 PM Page 8

7.0 NOTES:

1. MAN mode: Under this mode the unit disre-

gards the settings in the schedule mode and

remains in its manually set status ON or OFF.

NOTE: To resume regular schedule execution

press the mode key to return to AUTO mode.

2. Unit will go to RUN MODE automatically

(except on the MAN mode) if no key is pressed

for five minutes.

3. Clear all memory. All memory can be cleared

using the following procedure: While in the RUN

mode, press ENTER, display will show:

Use EVENT key to display:

Now press ENTER briefly and everything in the

timer memory will be erased, including real time

and date. NOTE: Unit has permanent memory

and will not be erased unless done through proce-

dure above.

5. Upon powering up your E101B/103B/120B the

display will show at what frequency the unit is

operating, 50 will determine 50Hz or 60 for

60Hz. NOTE: While in the AUTO mode, if AC

power is absent, the display will show a PF

(power failure) instead of the seconds scrolling

up.

6. A “Lo” on the display indicates that the super

cap has run low and the unit needs to be pow-

ered with AC. A minimum of 8 hours is required

to fully charge the super cap.

OFF

CLK DATE SCH AUTO MAN

OFF

CLK DATE SCH AUTO MAN

E101B SINGLE 7/22/07 10:02 PM Page 9

NOTE: AFTER MAKING ANY CHANGES TO THE

PROGRAM, PRESS MODE TO GO TO RUN MODE

AND THEN PRESS EVENT TO UPDATE THE LOAD

STATUS.

Sch.# OFFONTimeLoad Description

E101B SINGLE 7/22/07 10:02 PM Page 10

Ce manuel convient aux modèles suivants

Table des matières

Manuels Minuteur populaires d'autres marques

Intermatic

Intermatic P1131 Manuel utilisateur

Learning Resources

Learning Resources Time Tracker mini Manuel utilisateur

CEBEK

CEBEK I-215 Manuel utilisateur

Somogyi

Somogyi home TS MD 5 Manuel utilisateur

Profile

Profile 010200280 Manuel utilisateur

Gizmo

Gizmo T4 Manuel utilisateur

Tekmar

Tekmar Timer 031 Manuel utilisateur

Daikin

Daikin DST301B61 Manuel utilisateur

sisel

sisel ENDA ETM2432 Manuel utilisateur

B&Q

B&Q TE103 Manuel d'utilisation et d'entretien

Hozelock

Hozelock AC Plus 2700 Manuel utilisateur

GIC

GIC Eliro V7DDSS3Eliro V7DFTS3 Manuel utilisateur

Emos

Emos EMT400F Manuel utilisateur

FarmTek

FarmTek Polaris Manuel utilisateur

Maximum

Maximum CRONUS Manuel utilisateur

Uberhaus

Uberhaus TD133B Manuel utilisateur

Clas Ohlson

Clas Ohlson 31-3766 Manuel utilisateur

Gewiss

Gewiss 90 AM Series Manuel utilisateur