Tork 86ECO Instructions de construction
Washroom DispenserService and Parts Manual
Tork Electronic Hand Towel Roll Dispenser
86ECO
RevisionDate: 10-8-19
Essity Internal
Essity Internal
Tork Hand Towel Roll
Dispenser
(Electronic,Touch- Free):
H21 System:86ECO (Smoke)
Roll Towel Product Options:
RB350A (Tork Advanced,350’,
W
hite)
RB600(Tork Advanced,600’,
W
hite)
RB800(Tork Advanced,800’,
W
hite)
RB351(Tork Universal,350’,
W
hite)
RB6002 (Tork Universal,600’,
W
hite)
RB8002 (Tork Universal,800’,
W
hite)
RB8004 (Tork Universal,800’,
W
hite)
RB10002(Tork Universal,1000’,
W
hite)
RK350A(Tork Universal,350’, Natural)
RK600E(Tork Universal,600’, Natural)
RK800E (Tork Universal, 800’, Natural)
RK8002 (Tork Universal, 800’, Natural)
RK1000 (Tork Universal, 1000’, Natural)
214250 (Tork Universal, 425’, Natural White)
214404 (Tork Advanced, 1,000’, White)
214650 (Tork Universal,425’White)
218004 (Tork Universal, 800’, Natural White)
Specifications
Dispenser Size
Outer Case Size
SCC Code
Case
Weight
Case
Cube
Pallet Configuration
(ti x hi)
11.78" X 9.12" X 14.39"
12.75 x 10.75 x 14.5
10073286622461
4.1
1.15
9 x 9 = 81 units
DispenserParts
Part Description ReplacementSKU
LOCK FINGERS LOCKINSERT
LEFT HUB ARM
RIGHT HUB ARM
86ECO COVER 86ECO COVER
BUSINESSCARD
HOLDER
#14 DISP KEY AND
LOCK FINGERS
#14 KEY
1
of6
Washroom DispenserService and Parts Manual
Tork Electronic Hand Towel Roll Dispenser
86ECO
RevisionDate: 10-8-19
2
of6
Essity Internal
Essity Internal
Part
Description
with
Replacement
Instructions
Parts with SKUs listed are availablefor order from as of the revision date on the manual. Contact an
EssitySales Rep or the EssityQualityCoordinatorto order these parts.
If no SKU is listed, the
availability
of the part is unknown. Please contact the EssityQuality
Coordinatorfor more information(see Contacting Essitysection).
Replacement
SKU
Description
&
Replacement
Instructions
LOCKINSERT
LOCK FINGERS
Unmounting
the dispenseris requiredto remove the lock fingers. Locatethe
tabs that secure the lock fingers on the back of the dispenser. Bendthe tabs to
a position in which the fingers can be removed.
LEFT HUB ARM
RIGHT HUB ARM
Unmounting
the dispenseris requiredto remove the arms. Pinch the plastic
tabs on the back of the dispenser together while pulling arm from front.
Replacement
arms can be snapped into place from the front of the dispenser.
86ECOCOVER
86ECO COVER
Pull one side awayfrom back until hinge pivot clears back. Then pull other side
pivot awayfrom back and removecover.
#14 KEY
#14 DISP KEY
Washroom DispenserService and Parts Manual
Tork Electronic Hand Towel Roll Dispenser
86ECO
RevisionDate: 10-8-19
3
of6
Essity Internal
Essity Internal
DispenserInstallation and Mounting
MountingHeight
The lower part of the dispensershould be mounted 53”(135 cm) from the floor. Consult all appropriate
buildingcodes for mounting
requirements
that meet ADA or Title 24 guidelines.
Washroom DispenserService and Parts Manual
Tork Electronic Hand Towel Roll Dispenser
86ECO
RevisionDate: 10-8-19
4
of6
Essity Internal
Essity Internal
Battery
Installation
Paper Loading Instructions
1. Open the cover and prepareto load paper on hubs.
2. Free paper from roll, and positionroll so paper drapes from
underneath
the back of the roll.
3. Feed paper over top roller and betweentop and bottom roller.
4.
Manually
turn top roller to engage paper between rollers.
5. Close cover. Dispenserwill feed first sheet. Dispenseris readyfor use.
Preventive
Maintenance
The dispensershould be cleaned any time there is heavypaper dust build-up inside the dispenser. If
paper dust is not a problem,
approximately
every year is a good
frequency
for cleanings. The followingis
the
recommended
procedureto cleaning:
1) Open the dispenserand removethe roll of paper. Clear all paper from the feed assembly.
2) Clean out anypaper dust. This can be done is several ways, such as, vacuuming,blowing out with a
can of
compressed
air (wear safetyglasses), wiping out with a damp cloth, etc.
3) Clean the cover with a general all-purposecleanerthat is safe for plastics.
Washroom DispenserService and Parts Manual
Tork Electronic Hand Towel Roll Dispenser
86ECO
RevisionDate: 10-8-19
5
of6
Essity Internal
Essity Internal
Troubleshooting
This dispenseroperates in towel hang mode only. A towel will be present at all times. The mechanism
will be activatedand dispensea new towel onlyafter the present towel has been torn off and removed.
If no towel presents itself after loading paper, remove paper roll, removeand reinsert batteries, waiting 5
seconds between removaland re-inserting. Re-install roll and close cover.
If still no dispensing,removebatteries and replace with new batteries.
If problemsstill persist, please contact Essity.
ContactingEssity
Problem: Anyother problem not stated above
•
Contact the EssityQualityCoordinator.
•
Dial
1-866-722-8675,
press option 6
•
Please have dispenser date code available
Product Code Date Location: Open dispenser, note the date code stamps (2) on the top, right side of
the dispenser back wall for circles (like shown below) molded into unit. The circles will show the month
and year circle. Please have these available when contactingthe EssityQualityCoordinator.
To contact the EssityQuality
Coordinator,
dial
1-866-722-6659
and press option 6.
6
of6
Essity Internal
Washroom Dispenser Service and Parts
Man
ua
I
Tork
Electronic HandT
owe
I
Roll
Dispenser
86ECO
Revision
Date: 10-8-19
Essity Internal
86ECO Tork Electronic HWRT
Dispenser
Backplate
Template
F
------------
_:_:
-
---
[
u
..
Table des matières
Autres manuels Tork Distributeur
Tork
Tork S4 Intuition Manuel utilisateur
Tork
Tork Matic Elevation H1 Manuel utilisateur
Tork
Tork Elevation H2 Xpress Mini Instructions de construction
Tork
Tork Tork Matic 551100 Manuel utilisateur
Tork
Tork Matic H1 Instructions de construction
Tork
Tork 93T Mode d’emploi
Tork
Tork Essity Image Design 466000 Manuel utilisateur
Tork
Tork Image Design 460010 Manuel utilisateur
Tork
Tork 555520A Instructions de construction
Tork
Tork Image Design Tork 466100 Manuel utilisateur
Tork
Tork Image Design Matic 460001 Manuel utilisateur
Tork
Tork Matic Manuel utilisateur
Tork
Tork TRK565828 Manuel utilisateur
Tork
Tork 654021 Instructions de construction
Tork
Tork S4 Intuition Manuel utilisateur
Tork
Tork Xpress 451000 Manuel utilisateur
Tork
Tork Xpressnap N4 System Manuel utilisateur
Tork
Tork Elevation T2 Mini JBT Series Instructions de construction
Tork
Tork 209303A Instructions de construction
Tork
Tork TREA 0060 Manuel utilisateur
