Tone Commander 8610 Manuel utilisateur

13-280116 Rev. C

July 2008

.Tone Commander Systems, Inc.

11609 49th Place West

Mukilteo, WA 98275-4255

(800) 524-0024 (425) 349-1000

Fax (425) 349-1010

www.tonecommander.com

8610 / 8620

ISDN Telephone

Installation

Instructions

Tone Commander 8610/8620 Installation Instructions

Page 2 13-280116 Rev. C

Changes in this revision:

•Stand mounting instructions are clarified.

This manual applies to 8610/8620 software version 01.07.xx

Printed in USA

Tone Commander is a registered trademark of Tone Commander Systems, Inc.

13-280116 Rev. C Page 3

Contents

Introduction.....................................................................................................................................................5

General Features......................................................................................................................................5

Models/Options.........................................................................................................................................5

Controls and Indicators.............................................................................................................................7

Installation.......................................................................................................................................................9

Ordering ISDN Service..............................................................................................................................9

8610T/8620T Installation...........................................................................................................................9

8610U/8620U Installation........................................................................................................................12

Desktop Installation.................................................................................................................................13

Wall Mounting .........................................................................................................................................15

Configure the Set....................................................................................................................................17

Label the Set...........................................................................................................................................18

Installation Options ......................................................................................................................................19

Installation Options Menu .......................................................................................................................19

SPID Entry ..............................................................................................................................................20

Parameter Download ........................................................................................................................... 20

Configuring Keys and Indicators.............................................................................................................21

Terminal Mode........................................................................................................................................26

Installation Password..............................................................................................................................27

Reset to Factory Default Settings...........................................................................................................28

Voice Announce......................................................................................................................................29

Administration Options................................................................................................................................31

Administration Options Menu..................................................................................................................31

Local Inspect...........................................................................................................................................31

Version....................................................................................................................................................34

Test .........................................................................................................................................................35

Diagnostic Display...................................................................................................................................37

Restart.....................................................................................................................................................37

Viewing the Error and Download Logs....................................................................................................37

Troubleshooting............................................................................................................................................39

Inoperable Telephone Recovery Procedures.........................................................................................39

Telephone Configuration Troubleshooting..............................................................................................40

Appendix A Ordering ISDN Service..........................................................................................................41

Recommended Button Assignments.......................................................................................................42

Appendix B Setup Menu Tree...................................................................................................................43

Appendix C Warranty and Service............................................................................................................47

Appendix D Specifications ........................................................................................................................48

Factory Default Settings..........................................................................................................................49

Appendix E UL/FCC Statements ..............................................................................................................50

Tone Commander 8610/8620 Installation Instructions

Page 4 13-280116 Rev. C

13-280116 Rev. C Page 5

Introduction

For operation instructions and user setup options, please refer

to the 8610/8620 User Guide, doc. #14-280195.

General Features _____________________________________________

Tone Commander 8610 and 8620 ISDN Telephones are easy to use multiline terminals with advanced

automatic setup capabilities. S/T and U interface models are available with 10 or 20 call appearances. The

phones support a wide variety of ISDN platforms listed in Appendix D.

Features of the 8610 and 8620 include:

•AutoSPID and Parameter Download •Automatic Switch Type Detection

•Call Log •Message Waiting Indication

•Call Timer •Ringing Control for Shared Lines

•Last Number Redial •Flexible Ringing Options

•Speed Dial •Desktop or Wall Mounting

•Hot Key Dialing •Integrated Speakerphone

•Direct Station Select •Voice Announce

•Call Directory •Handset or Headset Operation

Models/Options ______________________________________________

Several 8600 series ISDN telephone models are available. The models differ in the number of multifunction

keys provided and type of ISDN connection.

The S/T models require an external NT1 Network Termination, such as Tone Commander’s NT1U-223TC

(rack mount) or NT1B-300TC (standalone). Two S/T telephones can share a single ISDN line in a multi-

point arrangement.

U models include a built-in NT1, allowing direct connection to the ISDN line. An additional S/T jack allows

another terminal device to be connected to the network through the built-in NT1.

Options include the 8030X Button Expansion Module, which adds 30 multifunction keys to any 8610 or

8620 phone, the 8001TA RS-232 Terminal Adapter for interfacing the phone with any TAPI-compliant

Windows application, the 8002TA Analog Port Terminal Adapter for interfacing with any standard analog

telephone device, and the 8003TA Terminal Adapter, which combines the features of the 8001TA and

8002TA. The 8030X Button Expansion Module can be combined with any of the terminal adapter options.

Basic

Model Multifunction Keys ISDN

Connection

8610T 10 (40 with 8030X) S/T

8620T 20 (50 with 8030X) S/T

8610U 10 (40 with 8030X) U

8620U 20 (50 with 8030X) U

Tone Commander 8610/8620 Installation Instructions

Page 6 13-280116 Rev. C

8610

8620 with 8030X Button Expansion Module

Introduction

13-280116 Rev. C Page 7

Controls and Indicators _______________________________________

1) Display – shows the call state, caller ID, dialed digits, network call control messages, and elapsed time

during calls. When not on a call, the date, time of day, and softkey options are displayed.

The viewing is primarily set by selecting the high or low base mounting position (page 13). Viewing

angle display clarity can be altered by adjusting the display contrast.

2) Softkeys – select the function displayed above the key on the second line of the display.

3) CALL Key – selects the Call Directory, Call Log, and Call Identification Display modes.

4) SETUP Key – enters Setup Mode.

5) DONE Key – exits the current menu, saves any changes made, and returns to the previous menu

options.

6) MORE4Key – cycles through the menu option groups in Setup Mode.

7) Message Waiting Indicator – a bright red indicator is lit when messages are waiting, controlled by the

network.

Tone Commander 8610/8620 Installation Instructions

Page 8 13-280116 Rev. C

8) Multifunction Keys – select call appearances, activate network features, or dial personal speed dial

numbers. Red and green indicators on the keys show call appearance and feature status. The optional

8030X Button Expansion Module provides 30 additional multifunction keys.

Call Appearance State Indication

Idle OFF

Call Ringing Green – flashing

In Use by You Green – on steady

On Hold by You Green – winking

In Use at Another Terminal

or an Activated Feature Red – on steady

On Hold at Another Terminal Red – winking

9) Volume Keys – adjust the receiver/speaker volume when on a call; adjust the ringer volume when on-

hook.

10) MUTE Key – mutes the microphone when using the speakerphone or handset/headset. A red indicator

on the key is lit when mute is active.

11) SPKR (Speaker) Key – activates the speakerphone. A green indicator on the key is lit when the

speakerphone is in use.

12) Dial Pad – dials telephone numbers, and sends DTMF tones to external equipment such as voice mail

systems. The dial pad is also used for number entry during setup.

13) TRAN (Transfer) Key – places the current call on hold, and selects an idle call appearance for

transferring the call. A second press completes a transfer.

14) CONF (Conference) Key – adds other parties to a conference call.

15) DROP Key – removes the last party added to a conference call, or disconnects you from a call and

returns new dial tone when not in conference mode.

16) HOLD Key – places a call on hold.

17) Microphone – used for hands-free (speakerphone) calling; located in front of the Hold key on the

bottom of the telephone.

18) Handset/Headset Jack – a jack on the side of the telephone connects to the handset or a standard

headset.

19) Telephone Identification Label Area – indented area for a directory number label. Use ½”x 1¾”

adhesive labels (Avery 8167/5267 or equivalent).

13-280116 Rev. C Page 9

Installation

Ordering ISDN Service ________________________________________

ISDN ordering forms may be supplied by your service provider. You can also print forms using the PC-

based Configuration Wizard. Please refer to Appendix A in this manual.

Consult your service provider to plan your service installation. Allow adequate time after cutover for testing

of all call appearances and programmed features. Ask your service provider for your SPID numbers, and

confirm the installation date.

8610T/8620T Installation _______________________________________

S/T models require an external NT1, such as the Tone Commander NT1U-223TC or NT1B-300TC.

Set the Termination Switches on the Telephone and NT1

Set the termination switches on the bottom of the telephone and on the NT1 to match the termination

impedance to your premises wiring configuration. Several typical wiring configurations are shown below,

with the appropriate switch setting.

We recommend the use of Category 3 or better unshielded twisted pair cable with T568A or T568B

connector wiring. Distances shown are the maximums for 24-gauge cable, and may vary for other cable

types.

Available switch settings are OFF and 100 ohms.

Tone Commander 8610/8620 Installation Instructions

Page 10 13-280116 Rev. C

Basic Multipoint:

(recommended for most applications)

Short Multipoint:

Extended Point-to-Point:

Autres manuels pour 8610

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tone Commander Téléphone

Tone Commander

Tone Commander 6210 Manuel utilisateur

Tone Commander

Tone Commander 6220-TSG-DD Manuel utilisateur

Tone Commander

Tone Commander 1560 Manuel utilisateur

Tone Commander

Tone Commander 8610 Manuel utilisateur

Tone Commander

Tone Commander 30e120 Manuel utilisateur

Tone Commander

Tone Commander 524 Manuel utilisateur

Tone Commander

Tone Commander 524 Manuel utilisateur

Tone Commander

Tone Commander 2260d Manuel utilisateur

Tone Commander

Tone Commander 6220T-TSG Manuel utilisateur

Tone Commander

Tone Commander 8810 Manuel utilisateur

Tone Commander

Tone Commander 8610 Manuel utilisateur

Tone Commander

Tone Commander 1030 Manuel utilisateur

Tone Commander

Tone Commander 40d120 Manuel utilisateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur