Tohnichi CEM3-P Manuel utilisateur

CEM3-P Program Version

Quick Start

1) After installing USB driver, and program software, set up “task list” in registration.

(Reference “CEM3-P Software Quick Start” or manual).

2) Move counter to “000”, hold MD key for 2 seconds. “DAT-IN” appears in display area. Press

Orange MEM key to enter set up mode:

Select Mode M or T, Auto-reset time, Buzzer on/off, Data out method, baud rate, default

settings, date and time setup.

(See standard CEM3 Quick Start for more details)

3) After confirming software setup ports and baud rates, install cable & hold down “MD” key for

2 seconds “DAT-IN” appears. In software select “transfer”, check groups and hit “transfer”.

If loading bar appears transfer is completed.

4) Use arrows to move count number off of “000”. Group id will appear. Select group name by

pressing MD key. Display will flash; use arrow keys to scroll through groups. Select by press-

ing MEM key.

5) Number of bolts will flash then part name will appear. Press “MD” key to check upper and

lower torque limits. If you need to go back to groups names press down arrow key.

6) Begin taking measurements or tightening and save by pressing MEM key.

7) When ready to download select max. count number to be included. “--” will appear in the dis-

play to indicate readings are stored in that count.

8) Press “MD” 1x for data out D-OUT, press MD 2x, for ALL OUT ,. Select Receive Menu “Data”

in software then press MEM to activate selection. Save data to Excel file. To clear out data on

wrench press MD. 3x for D-Clr 4x for ALL CLR.then press MD and C keys at the same time.

CLEAR will flash in the display and data will be deleted.

CEM3-P Program Version

Quick Start

Basic Keypad Instructions:

On count of 1 or higher

• Select Group: Hold MD key until screen flashes

• Use Up(+) or Down (-) to Scroll Groups Press

MEM key to Select

• Number of Fasteners:(Flashes quickly)

Ex. 1/4 (first of 4 bolts)

• Press MD Key to see Upper/Lower Limits for

this fastener

• Apply Torque: Manually Save: Press MEM key

• Press MEM to repeat same Group or MD to

Select New Group

.

Note: Download or delete periodically

to avoid maxing out the memory. If you

get an Err 6 the memory has reached

maximum capacity and data must be

deleted to continue..

Table des matières

Autres manuels Tohnichi Outils électriques

Tohnichi

Tohnichi CSPFHW Manuel utilisateur

Tohnichi

Tohnichi QSPCA Series Manuel utilisateur

Tohnichi

Tohnichi CTA2-G Manuel utilisateur

Tohnichi

Tohnichi CTB10N2X8D-G Manuel utilisateur

Tohnichi

Tohnichi SP Manuel utilisateur

Tohnichi

Tohnichi YCL2 Manuel utilisateur

Tohnichi

Tohnichi QLLS Manuel utilisateur

Tohnichi

Tohnichi QSP Series Manuel utilisateur

Tohnichi

Tohnichi QRSP-SP2-N Series Manuel utilisateur

Tohnichi

Tohnichi MPQL Manuel utilisateur

Tohnichi

Tohnichi FH256MC Manuel utilisateur

Tohnichi

Tohnichi QL25N Series Manuel utilisateur

Tohnichi

Tohnichi WQL Series Manuel utilisateur

Tohnichi

Tohnichi T-FHM Manuel utilisateur

Tohnichi

Tohnichi DATA TORK CEM3-G Manuel utilisateur

Tohnichi

Tohnichi SP Series Manuel utilisateur

Tohnichi

Tohnichi CLE2 Manuel utilisateur

Tohnichi

Tohnichi CTA2-G Manuel utilisateur

Tohnichi

Tohnichi DB SERIES Manuel utilisateur

Tohnichi

Tohnichi TiQL Manuel utilisateur

Tohnichi

Tohnichi TW750N2 Manuel utilisateur

Tohnichi

Tohnichi DATA TORK CEM3-G-WF Manuel utilisateur

Tohnichi

Tohnichi CMQSP Manuel utilisateur

Tohnichi

Tohnichi QL Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel