Tinkerine Studio Ditto Pro Manuel utilisateur
SD Card
USB Cable Power Cable
Print Bed Clips x4
Print Bed
DittoPRO Printer
Filament Spool Test Print
WHAT’S INSIDE
UNBOXING
Place the container on a at surface and peel
back the aps to reveal the printer.
Grab the two sides of the printer as shown
and slowly lift the printer out of the box.
Set the printer down on a at surface. Use a
scissor to cut away the two zip ties that secure
the print head. Take extra care to not cut the
printer belts.
12
3
INSERTING THE FILAMENT
Extend the lament guide tube from the back
of the printer.
Remove the lament spool from the
packaging and place it on the spool holder.
Remove the end of the lament from the
spool and insert it into the guide tube.
Thread the lament through the tube until it
comes out of the other end.
Insert the lament into the extruder. Push the
tensioner button to open up a gap.
Once the lament is within the hotend, insert
the guide tube into the top of the cover.
1 2
3 4
5 6
POWERING THE PRINTER
INSTALLING THE PRINT BED
Insert the power cable into the power socket
and wall socket.
Turn on the printer by ipping the power
switch to the On position ( I ).
Place the glass print surface onto the bed,
face the adhesion layer side up (BLUE).
With the clips provided, slide it on to pinch
the bed platform and glass surface together.
Repeat until all four clips are secured onto the
bed as shown.
1 2
1
3
2
LEVELING THE PRINT PLATFORM
STARTING A PRINT
From the main LCD menu, push the knob to
select the Wizard option.
From the LCD main menu, push the knob to
select the Print option.
Select the Bed Level option and follow the
on-screen instructions.
Use the provided Calibration Card to assist
you during the bed leveling process.
TempPrint
MAIN
MENU
StatusAxis Wizard
TempPrint
MAIN
MENU
Status
Axis Wizard
WIZARD
Exit
Bed Level New Filament
Scroll down to the desired le and press again
to start the print.
MAIN
TEST_PRINT.G
VASE.G
BRACELET.G
YOUR_PRINT.G
1 2
1 2
Autres manuels pour Ditto Pro
4
Autres manuels Tinkerine Studio Imprimante 3D
Tinkerine Studio
Tinkerine Studio Ditto Pro Manuel utilisateur
Tinkerine Studio
Tinkerine Studio Ditto Pro Manuel utilisateur
Tinkerine Studio
Tinkerine Studio LITTO Manuel utilisateur
Tinkerine Studio
Tinkerine Studio Ditto Pro Manuel de la liste des pièces
Tinkerine Studio
Tinkerine Studio Ditto Manuel utilisateur
Tinkerine Studio
Tinkerine Studio DittoPro-R Manuel de la liste des pièces
Tinkerine Studio
Tinkerine Studio Ditto Pro Manuel utilisateur
