Thermo Scientific Emerald Wireless Remote Sensor Manuel du propriétaire
Compatible Sensors for Smart-Vue
Pro Duo / Quatro Data Logger
Emerald Wireless Remote Sensor
Triple - CO2, Temperature and Humidity Sensor
Differential Pressure Sensor
Supplemental User Guide
331942H01 • Revision B • 12/21/2020
IMPORTANT Read this instruction manual. Failure to follow the instructions in this manual can result in
damage to the unit, injury to operating personnel, and poor equipment performance.
CAUTION All internal adjustments and maintenance must be performed by qualified service personnel.
Material in this manual is for informational purposes only. The contents and the product it describes are
subject to change without notice. Thermo Fisher Scientific makes no representations or warranties with
respect to this manual. In no event shall Thermo be held liable for any damages, direct or incidental, arising
from or related to the use of this manual.
© 2020 Thermo Fisher Scientific Inc. All rights reserved.
Contents
Notices and Safety....................................................... 1
Smart-Vue Pro Data Logger..................................... 1
Device Maintenance ................................................ 2
Emerald Wireless Remote Sensor ............................ 3
Certifications and Compliance...................................... 4
Smart-Vue Pro Data Logger..................................... 4
Emerald Wireless Remote Sensor ............................ 6
Differential Pressure Smart Sensor;
Temperature, Humidity and CO2 Smart Sensor......... 8
Introduction ................................................................. 9
Emerald Bluetooth Enabled Wireless Remote Sensors. 10
Wireless Remote Sensor Calibration......................... 10
Key Specifications.................................................... 11
Inserting the Battery into your Emerald Sensor ......... 11
Activating an Emerald Wireless Remote Sensor........ 11
Mounting your Emerald Sensor ................................ 12
Using Adhesive Tape................................................ 12
Using Wireless Remote Sensors with your
Data Loggers ........................................................... 12
Wireless Remote Sensors in Smart-Vue Pro Web
Application ............................................................... 15
Maintaining your Emerald Wireless Remote Sensors 17
CO2, Temperature and Humidity Smart Sensor ............ 18
Overview .................................................................. 18
Key Specifications.................................................... 19
Placing the Sensor and Smart-Vue Pro Data Logger 19
Differential Pressure Smart Sensor............................... 22
Overview .................................................................. 22
Usage ...................................................................... 22
Tube Placement....................................................... 23
Key Specifications.................................................... 24
Placement and Assembly......................................... 24
Velcro location on Extension box.............................. 25
Appendix 1 - Troubleshooting...................................... 26
Appendix 2 – Emerald Battery Life ............................... 29
Battery Details.......................................................... 29
Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger Notices and Safety | 1
Notices and Safety
Smart-Vue Pro Data
Logger
IMPORTANT NOTE: Do not use this product for protection
or as part of an automated emergency system or as for any
other application that involves protecting people and/or
property. This product is designed for use in environments
where children are not likely to be present. Customers and
users of Thermo Scientific products are responsible for
ensuring that the product is fit for the intended usage. Do not
open the product casing and do not disassemble or modify
internal components in any manner. Thermo Scientific
products do not contain any internal components that require
user intervention or repair. If the device shows signs of
improper operation, disconnect it immediately from its power
source or remove the battery and contact Thermo Scientific
technical services.
Electrical Warning
Battery Warning
CAUTION: To reduce the risk of electric shock,
do not open or remove the product casing. No user
serviceable parts inside. Refer servicing to qualified
service personnel. The lightning flash with
arrowhead symbol is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to a person.
CAUTION: This product contains two non
rechargeable 3.6V lithium batteries. Plugging the
device into the AC adapter (USB) does not recharge
the batteries. Ensure you respect polarity (+/-) as
indicated inside the battery compartment while
inserting batteries into Thermo Scientific devices.
Reversing polarity by inserting the batteries
incorrectly can cause the product to heat up and
may lead to battery liquid leakage. Use only
batteries recommended by Thermo Scientific.
Do not use a different type of battery such as
rechargeable, alkaline and magnesium or use
batteries of different brands or even different types
of batteries of the same brand. Never dispose of
batteries in fire. Do not charge regular batteries that
are not specifically rechargeable. When the battery
is low or in case the battery-operated device in
question remains unused for a lengthy period of
time remove the battery from the device in order to
avoid any risk of battery liquid leakage. Never leave
batteries within the reach of children. In case of a
battery leak, avoid all contact with the liquid present
on the batteries. Rinse with clear water immediately
in case the battery liquid comes into contact with
the eyes, mouth or skin. Contact a doctor or
emergency service immediately. Battery liquid is
corrosive and can damage vision or cause
blindness or chemical burns.
2 | Notices and Safety Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger
Device Maintenance
CAUTION: Do not attempt to disassemble the
device. There are no user serviceable parts inside.
CAUTION: Do not misuse the device. Follow
instructions on proper operation and only use as
intended. Misuse could make the device
inoperable, damage the device and / or other
equipment or harm users.
CAUTION: Do not apply excessive pressure or
place unnecessary weight on the device. This could
result in damage to the device or harm to users.
CAUTION: Do not use this device in explosive or
hazardous environments.
CAUTION: Do not expose your device to any
extreme environment where the temperature or
humidity is high. Such exposure could result in
damage to the device or fire.
CAUTION: Do not expose the device to water, rain,
or spilled beverages. It is not waterproof. Exposure
to liquids could result in damage to the device.
CAUTION: Do not place the device alongside
computer discs, credit or travel cards or other
magnetic media. The information contained on
discs or cards may be affected by the device.
CAUTION: Using accessories, such as antennas,
that Thermofisher has not authorized or that are not
compliant with Thermofisher accessory
specifications may invalidate the warranty.
Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger Notices and Safety | 3
Emerald Wireless Remote
Sensor
Disclaimer and Limitation of
Liability
OCEASOFT assumes no responsibility for any loss or claims
by third parties which may arise through the use of this
product. In particular, users must not use the product in any
manner not specifically indicated by OCEASOFT. OCEASOFT
shall not be held liable for improper use of this product. This
document is non-contractual and subject to change without
notice.
Safety Instructions
IMPORTANT NOTE: Do not use this product for protection
or as part of an automated emergency system or as for any
other application that involves protecting people and/or
property. Customers and users of OCEASOFT products are
responsible for making sure that the product is fit for the
intended usage. Do not open the product casing and do not
disassemble or modify internal components in any manner.
OCEASOFT products do not contain any internal
components that require user intervention or repair. If the
device shows signs of improper operation, disconnect it
immediately from its power source and contact OCEASOFT
technical services.
Battery Warning
CAUTION: This product contains a lithium battery.
Make sure you respect polarity (+/-) when inserting
batteries into OCEASOFT devices. Reversing
polarity by inserting the batteries incorrectly can
cause the product to heat up, and may lead to
battery liquid leakage. Use only batteries
recommended by OCEASOFT. Do not change
battery types, such as rechargeable, alkaline and
magnesium, or use batteries of different brands, or
even different types of batteries of the same brand.
Incorrect batteries may cause the device to heat up,
and may result in a fire or battery liquid leakage.
Never dispose of batteries in fire. Do not charge
regular batteries that are not specifically
rechargeable. When the battery is low, or in case
the battery-operated device in question remains
unused for a lengthy period of time, remove the
battery from the device in order to avoid any risk of
battery liquid leakage. Never leave batteries within
the reach of children. In case of a battery leak, avoid
all contact with the liquid present on the batteries.
Rinse with clear water immediately in case the
battery liquid comes into contact with the eyes,
mouth or skin. Contact a doctor or emergency
service immediately. Battery liquid is corrosive and
can damage vision or cause blindness or chemical
burns.
Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger
Certifications and Compliance
Smart-Vue Pro Data
Logger
FCC part 15 modular qualification:
FCC IDs:
- Contains Bluetooth component 2AA9B04.
- Contains LoRaWAN™ component XTLCMABZ.
This paragraph pertains to 915 MHz Smart-Vue Pro™
wireless devices. This device complies with part 15 of the
FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received
including interference that may cause undesired
operation.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. In order to avoid the
possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna should not be less than
20 cm (8 inches) during normal operation. End users must
follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna
or transmitter.
Industry Canada RSS-210 modular qualification.
IC:
- Contains Bluetooth component 12208A-04.
- Contains LoRaWAN™ component 9337A-CMABZ.
This paragraph pertains to 915 MHz Smart-Vue Pro™
wireless devices. This device complies with Industry
Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference.
4 | Certifications and Compliance
2. This device must accept any interference including
interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
This paragraph pertains to 868 MHz Smart-Vue Pro™
wireless devices. The Thermo Scientific product (contains
Bluetooth component BMD-300, LoRaWAN component
CMWX1ZZABZ) is compliant with the essential requirements
and other relevant requirements of the following standards
and/or normative documents.
Directives:
• 2014/53/EU Radio Equipment Directive (RED)
• 2014/30/EU EMC Directive
• 2014/35/EU Low Voltage Directive
• 2011/65/EU and the amendment of (EU) 2015/863
Restriction of Hazardous Substances Directive.
In application of the following standards:
• ETSI EN 300 220-2 V3.1.1
• EN 301 489-1 V2. 2.1
• EN 301 489-3: V2.1.1
• EN 301 489-17 V3. 2.1
• EN 300 328 V2. 2.2
• EN 61326-1:2013
• UL/CSA 61010-1: 2012 3rd edition and
• IEC/EN 61010-1: 2010 3rd edition.
FCC Statements
IC Statements
CE - Conformity with European Regulations
CAUTION: Any changes or modifications not
expressly approved by Thermo Scientific could
void the user's authority to operate the
equipment.
Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger Certifications and Compliance | 5
RoHS Compliance
The wireless device is in compliance with the EU
Directive 2011/65/EU (Restriction of the Use of
Certain Hazardous Substances in Electronic and
Electrical Equipment) and the amendment of (EU)
2015/863. Do not dispose of this product with
household trash. Thermo Scientific recycles this
product under certain conditions. Contact us for
more information.
6 | Certifications and Compliance Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger
Emerald Wireless Remote
Sensor
FCC part 15 modular qualification:
FCC ID: 2AA9B04
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna
or transmitter.
Industry Canada RSS-210 modular qualification.
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
conditions:
1. This device may not cause interference.
2. This device must accept any interference including
interference that may cause undesired operation of the
device.
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry
Canada. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communication.
OCEASOFT Emerald (bluetooth component BMD-300) is
compliant with the essential requirements and other relevant
requirements of the following standards and / or normative
documents.
Directives:
• 2014/53/EU Radio Equipment Directive (RED)
• 2014/30/EU EMC Directive
• 2014/35/EU Low Voltage Directive
In application of the following standards:
• EN 300 220-2 V3.1.1
• EN 300220 -1 V3.1.1
• EN 300328 V2.2.2
• IEC 61010-1: 2010 AMD1:2016
• IEC 62368-1: 2014 (2nd Edition)
• EN 61326-1: 2013
• IEC 60950-1:2005 (2nd Edition)+ A1:2009 + A2:2013
• EN 301 489-17 V3.2.1
• EN 301 489-3: V2.2.1
• EN 301 489-1 V2.2.1
• EN 61000-6-2: 2005
• EN 61000-6-4: 2007 / A1: 2011
• IEC 62311: 2017 Recommandation 1999/519/CE
Directive 2013/35/UE
MIC (Japan)
This equipment contains specified radio equipment that has
been certified to the Technical Regulation Conformity
Certification under the Radio Law.
• BMD-300 Type Acceptance Number: 210-106799
FCC Statements
FCC CAUTION: Any changes or modifications
to this equipment not expressly approved by
OCEASOFT may cause, harmful interference and
void the FCC authorization to operate this
equipment.
IC Statements
CE - Conformity with European Regulations
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Thermo Scientific Accessoires
Thermo Scientific
Thermo Scientific 3010 Mode d'emploi
Thermo Scientific
Thermo Scientific 3010 Mode d'emploi
Thermo Scientific
Thermo Scientific 30M Mode d'emploi
Thermo Scientific
Thermo Scientific invitrogen EVOS OSI-2 Manuel utilisateur
Thermo Scientific
Thermo Scientific Steri-Cycle i160 CR Manuel utilisateur
Thermo Scientific
Thermo Scientific 370 Mode d'emploi
Thermo Scientific
Thermo Scientific Phadia 100 Manuel utilisateur
Thermo Scientific
Thermo Scientific AquaSensors AnalogPlus Manuel utilisateur
Thermo Scientific
Thermo Scientific 8000DH Series Manuel utilisateur
Thermo Scientific
Thermo Scientific 3110 Mode d'emploi
Thermo Scientific
Thermo Scientific 3950 Mode d'emploi
Thermo Scientific
Thermo Scientific AquaSensors AnalogPlus 1.0 Manuel utilisateur
Thermo Scientific
Thermo Scientific 310 Series Manuel utilisateur
Thermo Scientific
Thermo Scientific 2076 Series Manuel utilisateur
Thermo Scientific
Thermo Scientific Unity Lab Services 3307 Manuel utilisateur
Thermo Scientific
Thermo Scientific Precision 818 Mode d'emploi
Thermo Scientific
Thermo Scientific BB 150 Manuel utilisateur
Thermo Scientific
Thermo Scientific 3554-35A Instructions d'installation et d'entretien
Thermo Scientific
Thermo Scientific 60-12 Manuel de service
Thermo Scientific
Thermo Scientific 61-12N-64P Manuel de service
