Thermaltake Pacific Gaming RL240 D5 Manuel utilisateur

Before Installation

Cautions: Make sure there's enough space when you start set up the LCS product

To ensure a clean loop, flush and rinse your radiators

and water blocks with distilled water before using.

Make sure the fittings are screwed securely when

placing them onto the radiator.

Attach the fans to the radiator

Choose the proper way to mount the pump and reservoir

by referring to the manual (suggest vertical palcement) Attach fittings onto the pump and reservoir

Attach the fittings to the inlet and outlet of the

waterblock.

Attach the waterblock onto the motherboard by

referring to the enclosed manual.

Radiators Case Fan

Pump and Reservoir

Water Blocks

Installation Walkthrough (Example: Core V51)

Place the motherboard into the case. Position the radiator. Attach the pump and reservoir into

the chosen locations.

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.

Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either !

Pacific Gaming RL240 D5 PETG LCS Kit

Cutting and Attaching the Tubing

Push the end of the tubing over the fitting ;

make sure the tubing is a tight fit. Slide the

cap over the fitting and rotate it clockwise

until the tubing is sealed in place.

Connect the tubing and check all the

fittings are sealed. The loop order:

Water Black > Radiator

Filling the System

Cautions:

1. Before filling the system, please make

sure that each fitting as well as unused

ports are completely sealed.

2. If there is any case of leaking,

immediately turn off the power and

clean the leak

3. If there's any related electronic parts

stained on liquid coolant, make sure to

completely clean and dry the

components. And then make sure they

all work well.

After switching off the power supply,

connect the PSU power cord and

product cables.

Use the refill bottle to fill coolant into the reservoir

Place your PSU outside of the case and attach it to

the pumps 4pin molex connector, turn on the power

of PSU and make the rest of the system fills up.

Thermaltake recommends the following steps to be taken after completing your water loop setup

1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance

while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.

2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.

3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately

4. Fill the reservoir to the top as it will prevent air from going into the pump

5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.

6. Place some paper towels under fittings and joining points to test for leaks.

7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop.

www.thermaltake.com

Connect the tubing and check all the

fittings are sealed. The loop order:

Pump Outlet > Water Block

onnect the tubing and check all the

fittings are sealed. The loop order:

Radiator > Reservoir Inlet

Table des matières

Autres manuels Thermaltake Matériel informatique

Thermaltake

Thermaltake TH360 ARGB Sync Manuel utilisateur

Thermaltake

Thermaltake Pacific MX2 Plus Manuel utilisateur

Thermaltake

Thermaltake Water 3.0 Ultimate Manuel utilisateur

Thermaltake

Thermaltake Level 10 GT Battle Edition VN10008W2N Manuel utilisateur

Thermaltake

Thermaltake ARMOR A60 Manuel utilisateur

Thermaltake

Thermaltake Divider 370 TG ARGB Manuel utilisateur

Thermaltake

Thermaltake TOUGHLIQUID Ultra 280 Manuel utilisateur

Thermaltake

Thermaltake CLP0539 Manuel utilisateur

Thermaltake

Thermaltake TH360 V2 Ultra ARGB Sync Manuel utilisateur

Thermaltake

Thermaltake Water 3.0 Extreme S Manuel utilisateur

Thermaltake

Thermaltake CLP0537 Manuel utilisateur

Thermaltake

Thermaltake Riing Silent 12 Sync Manuel utilisateur

Thermaltake

Thermaltake Water 3.0 Riing RGB 360 Manuel utilisateur

Thermaltake

Thermaltake Pacific R360 D5 Hard Tube Water Cooling Kit Manuel utilisateur

Thermaltake

Thermaltake C240 Manuel utilisateur

Thermaltake

Thermaltake Pacific PR32-D5 Plus Manuel utilisateur

Thermaltake

Thermaltake TOUGHLIQUID 360 ARGB TRX40 Edition Manuel utilisateur

Thermaltake

Thermaltake TH240 ARGB Sync Manuel utilisateur

Thermaltake

Thermaltake V3 Black Edition VL8000 Series Manuel utilisateur

Thermaltake

Thermaltake Toughpower 850 B Manuel utilisateur

Thermaltake

Thermaltake CLP0538 Manuel utilisateur

Thermaltake

Thermaltake UX100 Manuel utilisateur

Thermaltake

Thermaltake CL-W279-CU00SW-A Manuel utilisateur

Thermaltake

Thermaltake Pacific R240 D5 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur