Texas Instruments TMDX654IDKEVM Manuel utilisateur

AM65x/DRA80xM

Industrial Development Kit

Manufactured by Mistral Solutions Pvt. LTD. • www.mistralsolutions.com

Welcome to the AM65x/DRA80xM Industrial Development Kit (IDK) Quick Start Guide. This guide is

designed to help you through the initial setup of the board. This IDK allows you to experience industrial

applications which showcase the AM65x/DRA80xM Quad-Core Cortex®–A53, Dual-Core Cortex-R5F,

gigabit PRU-ICSS (real-time industrial communications subsystem), and more. The IDK contains

the following:

Hardware

• AM6548/DRA804M Quad Core Cortex®-A53

function equivalent processor

• IDK Application card

• 2-lane PCIe SerDes card

• 4GB DDR4 with ECC

• On board 16 GB eMMC

• On board 512Mb OSPI Flash

Printed Documents

• AM65x/DRA80xM IDK Quick Start Guide

(this document)

Miscellaneous

• 1 SD card

• 1 USB 2.0 cable

• 1 Ethernet cable

Not included in box

The following hardware is not included in the box and must be procured separately:

1. Power supply. Use one of the following power supply options for powering up the IDK. Pick a

power supply with all the applicable regional product regulatory/safety certication requirements such

as UL, CSA, VDE, CCC, PSE, etc.

The DIN connector power supply is recommended to provide enough power for applications that make

use of the PCIe interface.

2. 1280 x 800 LCD Display Accessory Kit. The LCD is optional and can be purchased separately

using TI part number TMDSLCD1EVM.

Connector Speciﬁcations Examples

Power DIN, 4 Pin +24VDC, 5A Output (Max) CUI Inc. SDI120-24-U-P51

Barrel Plug, 2.5mm I.D. x

5.5mm O.D. x 9.5mm

+24VDC, positive center, 2.71A

Output (Max)

CUI Inc. SDI65-24-UD-P6

Optional: If you have purchased the LCD Accessory

Kit, assemble the LCD onto the IDK following the

instructions included with the LCD Accessory Kit.

Connect a power supply (not included) to the DIN

connector or power jack on the IDK and plug it in to

an AC power source. Do not connect both, only one

power supply must be connected.

Insert the SD card into the IDK. Alternatively, download

and install the latest Processor SDK-RTOS from

http://www.ti.com/tool/processor-sdk-am65x, create

a bootable SD card and insert it into the IDK.

Connect the supplied USB debug cable to the USB

connector labeled “UART” on the board. Connect the

other end to your PC. Then open a serial console on

your PC such as Teraterm. Please note that you may

need to download and install an FTDI driver from

http://www.ftdichip.com/FTDrivers.htm.

Default setup (TI-RTOS boot from SD card)

For more information on AM65x processors, including:

•User Guide •Software •How To •Design Files

Please visit www.ti.com/am65x

For support questions, please contact: [email protected] or www.ti.com/e2e

Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to

obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software

performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Trademarks in this issue: The platform bar and Sitara are trademarks of Texas Instruments. All other trademarks are the property of their respective owners.

Printed in U.S.A.

SPRW324b

Note: This IDK is designed for optional use with a removable

CR2032 UL recognized lithium battery (not supplied). Always

use the CR2032VP Energizer 3V Lithium coin cell battery or

similar CR2032 UL recognized battery with Nominal Voltage

3.0 Volts, Capacity 235mAh

TI Processor SDK software development guides are available at:

Linux: www.ti.com/processor_sdk_linux

TI-RTOS: www.ti.com/processor_sdk_rtos

Android: www.ti.com/processor_sdk_android

7Note that this IDK comes with a coin battery holder.

A coin battery is not necessary for normal operation

of the IDK.

5 6

Optional: If you plan to use Code Composer Studio

(CCS) IDE to control the IDK, you must use another

USB cable connected to the USB connector labeled

“XDS110_USB” on the board. Refer to

http://software-dl.ti.com/processor-sdk-rtos/esd/docs/

latest/rtos/How_to_Guides.html#host for details about

CCS setup.

Turn on the IDK by sliding the toggle switch to the right.

To turn off, slide the toggle switch the left.

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE

DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”

AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate

TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable

standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you

permission to use these resources only for development of an application that uses the TI products described in the resource. Other

reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third

party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,

damages, costs, losses, and liabilities arising out of your use of these resources.

TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on

ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable

warranties or warranty disclaimers for TI products.

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Texas Instruments Microcontrôleur

Texas Instruments

Texas Instruments MSP430F6775 Manuel utilisateur

Texas Instruments

Texas Instruments CC11 L Series Manuel utilisateur

Texas Instruments

Texas Instruments MSP432P401R Manuel utilisateur

Texas Instruments

Texas Instruments CC2430ZDK Manuel utilisateur

Texas Instruments

Texas Instruments C2000 Piccolo LaunchPad Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6723A Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Texas Instruments

Texas Instruments LaunchPad LP-CC1352P7-1 Manuel utilisateur

Texas Instruments

Texas Instruments CC3100 SimpleLink Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon Products CC1050DK Manuel utilisateur

Texas Instruments

Texas Instruments Tiva TM4C123GH6PM Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel de programmation

Texas Instruments

Texas Instruments TMS320F28004 Series Manuel utilisateur

Texas Instruments

Texas Instruments OMAP35 Series Manuel utilisateur

Texas Instruments

Texas Instruments TPS65941120-Q1 Manuel utilisateur

Texas Instruments

Texas Instruments SimpleLink CC2652RB Manuel utilisateur

Texas Instruments

Texas Instruments CC110 Series Mode d’emploi

Texas Instruments

Texas Instruments LM26EVM Manuel utilisateur

Texas Instruments

Texas Instruments MSP-EXP430G2ET Manuel utilisateur

Texas Instruments

Texas Instruments MSP430F6769 Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon Products CC2420 Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F28004x Manuel du produit

Texas Instruments

Texas Instruments Serial Programming Adapter MSP430 Manuel utilisateur

Texas Instruments

Texas Instruments MSP-EXPCC430RF Series Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur

Silicon Laboratories

Silicon Laboratories C8051F800 Manuel utilisateur

Energy micro

Energy micro EFM32 Giant Gecko Starter Kit Manuel utilisateur

Mikroe

Mikroe click Proximity 2 Manuel utilisateur