Tews Technologies TVME201 Manuel utilisateur

The Embedded I/O Company

TVME201

4 Slot IndustryPack® VMEbus Carrier

Version 1.1

User Manual

Issue 1.1.1

January 2018

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com

TVME201 User Manual Issue1.1.1 Page 2 of 26

TVME201-10R

4 Slot IndustryPack VMEbus Carrier

This document contains information, which is

proprietary to TEWS TECHNOLOGIES GmbH. Any

reproduction without written permission is forbidden.

TEWS T

ECHNOLOGIES GmbH has made any

effort to ensure that this manual is accurate and

complete. However TEWS TECHNOLOGIES GmbH

reserves the right to change the product described

in this document at any time without notice.

TEWS TECHNOLOGIES GmbH is not liable fo

r any

damage arising out of the application or use of the

device described herein.

Style Conventions

Hexadecimal characters are specified with prefix 0x,

i.e. 0x029E (that means hexadecimal value 029E).

Access terms are described as:

W Write Only

R Read Only

R/W Read/Write

R/C Read/Clear

R/S Read/Set

2018 by TEWS TECHNOLOGIES GmbH

All trademarks mentioned are property of their respective owners.

TVME201 User Manual Issue1.1.1 Page 3 of 26

Issue

Description

Date

1.0 First Issue May 2002

1.1 Value correction chapter “VMEbus P1 connector” October 2002

1.2 I/O connector Pin 1 marking added November 2002

1.3 Function added to switch S3 September 2004

1.4 Clarification of Interrupt Mapping November 2004

1.5 New address TEWS LLC September 2006

1.1.0 new User Manual Issue Notation December 2008

1.1.1 General Revision January 2018

TVME201 User Manual Issue1.1.1 Page 4 of 26

Table of Contents

1PRODUCT DESCRIPTION.........................................................................................7

2TECHNICAL SPECIFICATION...................................................................................8

3CONFIGURATION......................................................................................................9

3.1 VME A16 Base Address................................................................................................................10

3.2 Interrupts .......................................................................................................................................12

3.3 VME A24/A32 Memory Enable and Size......................................................................................13

3.4 VME A24/A32 Base Address........................................................................................................14

4IP IRQ AND CONTROL REGISTER.........................................................................17

4.1 IP IRQ Configuration Register .....................................................................................................17

4.2 Control Register............................................................................................................................19

5IP STROBE SIGNAL ................................................................................................21

6INSTALLATION OF INDUSTRYPACKS..................................................................22

7FRONT PANEL INDICATORS .................................................................................23

7.1 ACK and Power LEDs...................................................................................................................23

7.2 Fuses and Filters...........................................................................................................................23

8PIN ASSIGNMENT ...................................................................................................24

8.1 IP Connectors................................................................................................................................24

8.2 VMEbus Connectors.....................................................................................................................25

8.2.1 VMEbus P1 Connectors ...................................................................................................25

8.2.2 VMEbus P2 Connector.....................................................................................................26

TVME201 User Manual Issue1.1.1 Page 5 of 26

List of Figures

FIGURE 1-1 : BLOCK DIAGRAM......................................................................................................................7

FIGURE 3-1 : ROTARY SWITCH S1 – S6........................................................................................................9

FIGURE 3-2 : VME A16 BASE ADDRESS .....................................................................................................10

FIGURE 3-3 : INTERRUPT MAPPING ...........................................................................................................12

FIGURE 3-4 : VME A24/A32 MEMORY ENABLE AND SIZE.........................................................................13

FIGURE 3-5 : VME A24/A32 BASE ADDRESS..............................................................................................14

FIGURE 5-1 : IP STROBE SIGNAL................................................................................................................21

FIGURE 6-1 : FRONT PANEL.........................................................................................................................22

TVME201 User Manual Issue1.1.1 Page 6 of 26

List of Tables

TABLE 2-1 : TECHNICAL SPECIFICATION.....................................................................................................8

TABLE 3-1 : CONFIGURATION STEPS...........................................................................................................9

TABLE 3-2 : VME A16 ADDRESS MAP (S3 = “0” TO “7”) .............................................................................11

TABLE 3-3 : VME A16 ADDRESS MAP (S3 = “8” TO “F”) .............................................................................11

TABLE 3-4 : VME INTERRUPT MAPPING BY S3 .........................................................................................12

TABLE 3-5 : VME MEMORY SIZE BY S4.......................................................................................................14

TABLE 3-6 : VME A24/A32 ADDRESS MAP..................................................................................................16

TABLE 4-1 : IP IRQ CONFIGURATION REGISTERS (IP A / IP B)................................................................17

TABLE 4-2 : IP IRQ CONFIGURATION REGISTERS (IP C / IP D) ...............................................................18

TABLE 4-3 : IP CONTROL REGISTERS (IP A / IP B)....................................................................................19

TABLE 4-4 : IP CONTROL REGISTERS (IP C / IP D) ...................................................................................20

TABLE 7-1 : IP ACK LED................................................................................................................................23

TABLE 7-2 : IP POWER LED..........................................................................................................................23

TABLE 8-1 : IP J1 LOGIC INTERFACE PIN ASSIGNMENT..........................................................................24

TABLE 8-2 : VMEBUS P1 CONNECTOR.......................................................................................................25

TABLE 8-3 : VMEBUS P2 CONNECTOR.......................................................................................................26

TVME201 User Manual Issue1.1.1 Page 7 of 26

1 Product Description

The TVME201 is non-intelligent 6U VMEbus Carrier for up to 4 single-size or two double-size

IndustryPack (IP) modules used to build modular, flexible and cost effective I/O solutions for

applications in process control, medical systems, telecommunication and traffic control.

The TVME201 is designed in accordance to VMEbus Specification ANSI/VITA 1-1994 and the

IndustryPack Logic Interface Specification ANSI/VITA 4-1995. It guarantees compatibility with the wide

range of IndustryPacks in a VMEbus system.

IndustryPack I/O and ID spaces are mapped into the VME A16/D16 space.

IP Memory spaces are mapped into the VME A24 or A32 space. D08 and D16 accesses are

supported. If mapped in the VME A24 space, the size of the required memory space is configurable. In

VME A32 space, there is a fixed space of 8 Mbytes for each IP module.

Strobe signals of all IP modules are accessible via a 4 pin jumper block on the TVME201. DMA, 32 bit

access and 32 MHz operations are not supported.

For improved EMI protection, four HD50 SCSI-2 type connectors are mounted in the EMI front panel

of the TVME201 and provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V

are provided in the front panel.

A set of 16-position rotary switches allows easy configuration of VME Short I/O and Memory

addresses. Interrupt routing from the IP slots to the VME IRQs can be done in two ways:

programmable by software or selection of predefined sets by a rotary switch.

The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature

range is -40°C and +85°C.

Figure 1-1 : Block Diagram

TVME201 User Manual Issue1.1.1 Page 8 of 26

2 Technical Specification

VMEbus Slave Interface

According to VMEbus specification, ANSI / VITA 1-1994, 6U Board

Short I/O

VME A16, D08/16,

Address Modifier: 29, 2D

Size: 1 KBytes (256 Bytes / IP)

Standard Memory

VME A24, D08/16,

Address Modifier: 39, 3A, 3D, 3E

Size: programmable from 32 Kbytes to 2 Mbytes per IP

Extended Memory VME A32, D08/16,

Address Modifier: 09, 0A, 0D, 0E

Size: fixed, 8 Mbytes per IP

Interrupts

VME IRQ1-7

IP Interface

According to IndustryPack specification ANSI / VITA 4-1995

IP Slots Four single size or two double size with front panel I/O

Mapping of IP Interrupts to

VMEbus

Programmable by software or selection of predefined sets by a

rotary switch

I/O Access HD50 SCSI-2 type connector (AMP 787395-5) per IP, mounted in

EMI front panel

DMA

32 MHz

Not supported

Status LEDs ACK LED for each IP slot

+5V Power LED for each IP slot

+12V and –12V Power LED

Protection

Self healing fuses and RF-filtering on all IP power lines

Power Requirements

without IP Modules 300 mA typical @+ 5 VDC

1 mA typical @+ 12 VDC

1 mA typical @ -12 VDC

Additional Power is required by IP modules

Temperature Range Operating

Storage – 40°C to + 85C

– 40°C to + 125°C

MTBF 358000 h

MTBF values shown are based on calculation according to MIL-HDBK-217F and

MIL-HDBK-217F Notice 2; Environment: GB20°C.

The MTBF calculation is based on component FIT rates provided by the component

suppliers. If FIT rates are not available, MIL-HDBK-217F and MIL-HDBK-217F

Notice 2 formulas are used for FIT rate calculation.

Weight

260 g – no IndustryPack inserted

Size Singe Size 6U Euro Card

Humidity

5 – 95 % non-condensing

Table 2-1 : Technical Specification

TVME201 User Manual Issue1.1.1 Page 9 of 26

3 Configuration

Setting 6 rotary switches allows all required configuration of the TVME201. Position of the switches is

shown below:

Figure 3-1 : Rotary Switch S1 – S6

Step Rotary Switch Function Default Value

1 S1 / S2 VME A16 Base Address 0x6000

2 S3 Interrupt Mapping VIPC6xx compatible

3 S4 VME A24/A32 Memory Enable and

Memory Size Disabled

4 S5 / S6 VME A24/A32 Memory Base Address A24: 0xD00000

A32: 0xD0000000

Table 3-1 : Configuration Steps

TVME201 User Manual Issue1.1.1 Page 10 of 26

3.1VME A16 Base Address

The VME A16 Base Address of the TVME201 is set by rotary switch S1 and S2.

Rotary switch S1 sets A[15:12] of the VME A16 Base Address.

Rotary switch S2 sets A[11:10] of the VME A16 Base Address.

Figure 3-2 : VME A16 Base Address

The default value for the VME A16 Base Address is 0x6000 (S1=6, S2=0).

The TVME201 requires an address space of 1 Kbytes within the VME A16 address space. Each of the

four IP slots occupies 256 bytes within this 1 Kbytes VME A16 address space.

The address space for each IP is divided into the following areas: IP I/O space, IP ID space and the IP

IRQ and Control Register.

The IP I/O space has a size of 128 bytes. The size of the IP ID space and the IP IRQ and Control

With S3 = “0” to “7”, the IP IRQ and Control Registers of the TVME201 are accessible, and the size of

the IP ID space is 64 bytes. The remaining 64 bytes are occupied by the IP IRQ and Control

Registers. If switch S3 = “8” to “F”, the IP IRQ and Control Registers of the TVME201 are not

accessible, and the corresponding address range is added to the IP ID space, resulting in a size of

128 bytes for the IP ID space with S3 = “8” to “F”. This configuration is necessary for IP modules that

require access to the ID Space above the ID PROM.

See figures below for more details.

Table des matières

Autres manuels Tews Technologies Matériel informatique

Tews Technologies

Tews Technologies TCP270 Manuel utilisateur

Tews Technologies

Tews Technologies TIP815-SW-12 Manuel utilisateur

Tews Technologies

Tews Technologies TXMC638 Manuel utilisateur

Tews Technologies

Tews Technologies TAMC261 Manuel utilisateur

Tews Technologies

Tews Technologies TDRV003-SW-65 Manuel utilisateur

Tews Technologies

Tews Technologies TPMC463 Manuel utilisateur

Tews Technologies

Tews Technologies TAMC020-TM Manuel utilisateur

Tews Technologies

Tews Technologies TPCE261-10R Manuel utilisateur

Tews Technologies

Tews Technologies TMPE633 Manuel utilisateur

Tews Technologies

Tews Technologies TPMC551-SW-95 Manuel utilisateur

Tews Technologies

Tews Technologies TPMC321 Manuel utilisateur

Tews Technologies

Tews Technologies TMPE627 Manuel utilisateur

Tews Technologies

Tews Technologies TA900 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur