TESTO 410-2 Comment utiliser

Notizen10

Short manual testo 410-2 11

Short manual testo 410-2

ÀProtection cap: Park position

ÁImpeller

ÂHumidity/temperature sensor

ÃDisplay

ÄControl keys

ÅBattery compartment (on rear)

Basic settings

Instrument off >press and hold 2s > select with ( ),

confirm with ( ):

Unit of temperature: °C, °F > Unit of humidity: %, td (dew point) > WB (wet bulb) >

Unit of velocity: m/s, km/h, fpm, mph, kts, Beau > Auto off-Funktion: OFF, ON

Switching the instrument on

Press .

Switching the display light on (for 10s)

Instrument on > press .

Select display size

Instrument on > select with :

Velocity, humidity, wind chill temperature ( )

Select display mode

Instrument on > select with :

Current reading > Hold: Readings are held > Max: Maximum values > Min: Minimum

values > Hold Avg: Timed mean value calculation, see below

Timed mean value calculation for flow

Press several times, until Hold and Avg appear > Hold down

until - - - - appears > Releasing starts mean value calculation,

the current readings are displayed > End measurement:

press the mean value is displayed.

Switching the instrument off:

Instrument on >press and hold 2s.

de

enfres

it

pt

sv

nl

??

??

Safety and the enviroment12

Safety and the environment

About this document

> Please read this documentation through carefully and

familiarise yourself with the product before putting it to use.

Keep this document to hand so that you can refer to it when

necessary. Hand this documentation on to any subsequent

users of the product.

> Pay particular attention to information emphasised by the

following symbols:

Important.

Avoid personal injury/damage to equipment

> Only operate the measuring instrument properly, for its

intended purpose and within the parameters specified in the

technical data. Do not use force.

> Never store the product together with solvents, acids or other

aggressive substances.

> Only carry out the maintenance and repair work that is

described in the documentation. Follow the prescribed steps

when doing so. Use only OEM spare parts from Testo.

> Do not use the device in a polluted environment (heavily dusty,

oil, foreign matter, volatile chemicals).

Protecting the environment

> Take faulty rechargeable batteries as well as spent batteries to

the collection points provided for them.

> Send the product back to Testo at the end of its useful life. We

will ensure that it is disposed of in an environmentally friendly

manner.

Specifications 13

Specifications

The testo 410-2 is a flow/humidity/temperature measuring

instrument. It is normally used to measure the air speed at

ventilation outlets. In addition to the simultaneous measurement

of humidity and temperature, climatic conditions can also be

analysed.

Technical data

Measurement data

· Sensors:

Plastic impeller,

Testo humidity sensor,

NTC temperature sensor

· Parameters:

m/s, km/h, fpm, mph, kts, Beaufort,

°C, °F, wind chill, %rH, wet bulb, td

· Measuring ranges:

0.4...20 m/s, 80... 4000 fpm

-10...50 °C, 14...122 °F, 0...100 %rH

· Resolutions:

0.1 m/s, 1 fpm

0.1 °C, 0.1 °F, 0.1 %rH

· Accuracies (Nominal temperatue 22 °C,

±1 Digit):

±(0.2 m/s +2 % of reading),

±(40 fpm +2 % of reading),

±0.5 °C, ±0.9 °F,

±2.5 %rH (5...95%rH)

Long-term stability: ±1 %rF / year

· Measuring rate:

0.5 s, humidity: 1s

Further instrument data

· Protection class: IP10

· Ambient conditions:

-10...50 °C, 14...122 °F

· Storage/transport conditions:

-40...70 °C, -40...158 °F

· Temperature coefficient:

type (k=1) 0.06 %rF / K

· Voltage supply:

2x 1.5 V type AAA

· Battery life:

60 h (without display light)

· Dimensions:

133x46x25mm / 5.2x1.8x1.0 in (inc.

protection cap)

· Weight: 110 g / 3.9 oz (inc. batteries

and protection cap)

Directives, standards and tests

· EC Directive: 2014/30/EC

de

enfres

it

pt

sv

nl

??

??

Product description14

Product description

At a glance

ÀProtection cap: Park position

ÁImpeller

ÂHumidity/temperature sensor

ÃDisplay

ÄControl keys

ÅBattery compartment (on rear)

First steps

ãInserting batteries:

1To open the battery compartment, push the battery cover

down.

2Insert batteries (2x 1.5 V type AAA). Observe the polarity!

3To close the battery compartment, push the battery cover

back on.

ãBasic settings (configuration mode):

Adjustable functions

· Unit of temperature: °C, °F

· Unit of humidity: %, td (dew point), WB (wet bulb)

· Unit of velocity: m/s, km/h, fpm, mph, kts, Beau

· Auto off function: OFF, ON (instrument switches off automatically if no key is

pressed for 10 minutes)

1When switching the instrument on, press and hold until

and appear on the display (configuration mode).

- The adjustable function is displayed. The current setting

flashes.

2Press ( ) several times until the desired setting flashes.

3Press ( ) to confirm the input.

4Repeat steps 2and 3for all functions.

- The instrument changes to measuring mode.

Using the product 15

Using the product

To ensure correct readings:

· Position instrument so that flow impacts at the rear.

· Keep temperature and humidity sources which may falsify the

measurement (e.g. hands) away from the sensor.

ãSwitching the instrument on:

>Press .

- Measuring mode is opened.

ãSwitching the display light on:

3The instrument is switched on.

>Press .

- The display light goes out automatically if no key is

pressed for 10 seconds.

ãChanging the parameter:

The parameter in the top display line can be changed. The

bottom display line always shows the temperature.

Adjustable parameters

· Velocity

· Humidity

· Wind chill temperature ( ): perceived temperature (only deviates from

ambient temperature at temperatures <10°C / <50°F and wind speeds

>1.34m/s / >264 fpm)

>Press several times until the desired parameter appears.

ãChanging the display view:

Adjustable views

· Current reading

· Hold: Readings are held.

· Max: Maximum values since the instrument was last switched on or last reset.

· Min: Minimum values since the instrument was last switched on or last reset.

· Hold Avg: Timed mean value calculation, see below.

>Press several times until the desired view appears.

ãTimed mean value calculation for flow:

1Press several times, until Hold and Avg appear in the

display. The last result of mean value calculation is

displayed.

2Hold down until - - - - appears. Releasing starts

mean value calculation automatically, the current readings

are displayed.

de

enfres

it

pt

sv

nl

??

??

Using the product16

3End measurement: press . The mean value is displayed.

4For further mean value calculation: hold down .

5End mean value calculation: press briefly.

ãResetting Max/Min values:

1Press several times until the desired view appears.

2Press and hold until - - - - appears.

3Repeat steps 1and 2for all values that are to be reset.

ãSwitching the instrument off:

>Press and hold until the display goes out.

Autres manuels pour 410-2

2

Table des matières

Autres manuels TESTO Instrument de mesure

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur