TESTO 480 Comment utiliser

testo 480 · Climate measuring instrument

Short manual

2

0 Performing a measurement

3

Pos: 1 /TD/Kurzanleit ungen/testo 480/Kur zanleitung testo 480 @ 9\ mod_1311687178306_79. docx @ 86335 @ 55551555555 @ 1

Initial charging of the rechargeable battery

The testo 480 is delivered with a partially charged battery. Charge

the battery fully before using it for the first time.

1. Connect the mains unit to the mains socket (3).

2. Connect the mains plug to a power socket.

- Battery charging is started: status LED (4) lights up.

- The battery is fully charged: status LED (4) is off.

3. Disconnect instrument from the mains unit.

- After initial charging of the rech. battery, the instrument is ready

for use.

Trackpad

[]

[]

Move your finger smoothly over the

trackpad (up/down, right/left).

[] Briefly touch the trackpad with your

finger to confirm the selection. When

confirming, you should notice a click

similarly to pressing a button.

Initial operation

1. Switch the instrument on with [].

- The start screen appears.

For initial commissioning or after a factory reset, the Initial

operation menu is opened automatically. Set the required menu

language:

> Call up the required selection list with [].

2. Select the language with []and confirm with [].

- Instrument language is changed.

3. Set the date and time with []and []and confirm with [

].

0 Performing a measurement

4

4. Select ISO/US units with []and confirm with [].

The setting only relates to the measured values and can be

individually adjusted for each measurement value if

required.

5. []→Save and close.

- The current measurement values are displayed. The instrument

is now operational.

Connecting probes / sensors

Probes are detected automatically by the instrument.

Make sure the connections are secure, but do not use force!

> Insert the probe connector into the probe socket:

• Bottom of the instrument: TC probe (type K)

• Top of the instrument: digital probe:

- In the measuring view, a separate tab is displayed for each new

probe.

1Favourites tab (measuring programs can only be carried out

here)

2Internal measuring channels

3Probe tab with probe-specific measurement values

> []toggles between the tabs.

0 Performing a measurement

5

Performing a measurement

All steps for carrying out a sample measurement are set out below.

The individual setting options and a detailed description of the

various measurements can be found in the testo 480 instruction

manual.

Saving current measuring values of a probe

1. On the tab of the relevant probe, select []→Quick back-up.

- The protocol is located under []→Default point →Quick

back-up

If several measurements are saved, the protocols appear

one below the other, sorted according to date.

Protocols can also be saved under a specific measuring

location (client) and measuring point.

(See testo 480 instruction manual, chapter "Saving

measurement data".)

0 Performing a measurement

6

Saving measuring values from several probes in one protocol

The measuring values of the connected probes are displayed on

the Favourites tab .

The grey number above the unit indicates the probe ID, which is

also given in the name of the relevant probe tab.

1. []→Quick back-up

- The measuring values are saved together in one protocol.

Changing the measuring value display

The measuring value display can be individually customised on

each tab, e.g.

• Add calculated measurement parameters

• Remove displayed measurement parameters

• Change the unit per measurement parameter

(See testo 480 instruction manual, chapter " Setting the

measurement display ".)

Carrying out a measurement program

With the testo 480, standard measurement programs and special

measurements, e.g. turbulence measurement, can be carried out.

(See testo 480 instruction manual, chapter "Measurement

program".)

=== Ende der Liste für Textmarke Inhalt ===

0 Performing a measurement

7

0 Performing a measurement

8

0970 4801 en 02 V01.05 en

Autres manuels pour 480

2

Table des matières

Autres manuels TESTO Instrument de mesure

TESTO

TESTO 416 Manuel utilisateur

TESTO

TESTO 922 Manuel utilisateur

TESTO

TESTO 510 Manuel utilisateur

TESTO

TESTO 816 Manuel utilisateur

TESTO

TESTO 435-2 Manuel utilisateur

TESTO

TESTO 310 II Manuel utilisateur

TESTO

TESTO 556 Manuel utilisateur

TESTO

TESTO 310 Manuel utilisateur

TESTO

TESTO Saveris 2 Manuel utilisateur

TESTO

TESTO 606-1 Manuel utilisateur

TESTO

TESTO 314 Guide de l'utilisateur

TESTO

TESTO 330 Manuel utilisateur

TESTO

TESTO 535 Manuel utilisateur

TESTO

TESTO 417 Manuel utilisateur

TESTO

TESTO 535 Manuel utilisateur

TESTO

TESTO 615 Manuel utilisateur

TESTO

TESTO 926 Manuel utilisateur

TESTO

TESTO 6681 Profibus Manuel utilisateur

TESTO

TESTO 560i Manuel utilisateur

TESTO

TESTO 570 Manuel utilisateur

TESTO

TESTO 606-2 Manuel utilisateur

TESTO

TESTO Saveris Manuel utilisateur

TESTO

TESTO Smart Valve Manuel utilisateur

TESTO

TESTO Smart Probes 905i Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur