Teltonika FMB965 Guide d'installation

Quick Manual

v1.0

Smart waterproof tracker

FMB965

 
2 
FMB965 | 
Wiki
 
Table of Contents 
Table of Contents............................................................................... 2 
Know your device............................................................................... 3 
Pinout................................................................................................. 4 
Wiring scheme ................................................................................... 5 
Set up your device ............................................................................. 6 
How to insert Nano-SIM card .......................................................... 6 
PC Connection (Windows)................................................................ 7 
How to install USB drivers (Windows)............................................. 7 
Configuration (Windows) ................................................................. 7 
Quick SMS configuration.................................................................. 9 
Mounting recommendations .......................................................... 10 
LED indications................................................................................. 11 
Characteristics.................................................................................. 11 
Basic characteristics ....................................................................... 11 
Electrical characteristics................................................................. 13 
Safety information ........................................................................... 14 
Certification and Approvals ............................................................. 15 
Warranty........................................................................................... 16 
Warranty Disclaimer........................................................................16 
 

FMB965 |

Wiki

Know your device

Figure 1 FMB965 device view

FMB965 |

Wiki

Pinout

Table 1 Pinout

Pin number

Pin name

Description

VCC (10-30)V DC (+)

(Red) Power supply (10-30) V DC (+).

DIN 1

(Yellow) Digital input, channel 1.

DEDICATED FOR IGNITION INPUT

DOUT 1

(Blue) Digital output.

DOUT 2

(White) Digital output.

GND (-)

(Black) Ground.

Figure 2 FMB965 pinout

FMB965 |

Wiki

Wiring scheme

Automotive relay

Figure 3 FMB965 Wiring scheme

FMB965 |

Wiki

Set up your device

How to insert Nano-SIM card

1. Gently remove FMB965 cover using plastic pry tool from both

sides.

2. Gently lift the PCB out of the cover.

3. Insert Nano-SIM card as shown with PIN request disabled or

read Security info how to enter it later in Configurator. Make

sure that Nano-SIM card cut-off corner is pointing outwards to

slot.

4. Connect the battery as shown on device.

5. Place PCB back into the place as shown in the picture, first the

end that is marked as 1 need to be inserted, then the end that

is marked as 2.

6. Attach device cover back. Device is ready to be connected.

Figure 9 Attaching cover back

Figure 8 Insert PCB back

Figure 6 Nano-SIM card insert

Figure 5 PCB removal

Figure 4 Cover removal

Figure 7 Battery connection

FMB965 |

Wiki

PC Connection (Windows)

1. Power-up FMB965 with DC voltage (10 –30 V) power supply

using power wires. LED’s should start blinking, see “LED

indications”.

2. Connect device to computer using Micro-USB cable or

Bluetooth connection:

•Using Micro-USB cable

▬You will need to install USB drivers, see “How to install

USB drivers (Windows)”

•Using Bluetooth

▬FMB965 Bluetooth is enabled by default. Turn on

Bluetooth on your PC, then select Add Bluetooth or other

device > Bluetooth. Choose your device named –

“FMB965_last_7_imei_digits”, without LE in the end. Enter

default password 5555, press Connect and then select

Done.

3. You are now ready to use the device on your computer.

How to install USB drivers

(Windows)

1. Please download COM port drivers from here.

2. Extract and run TeltonikaCOMDriver.exe.

3. Click Next in driver installation window.

4. In the following window click Install button.

Setup will continue installing the driver and eventually the

confirmation window will appear. Click Finish to complete the

setup.

Configuration (Windows)

At first FMB965 device will have default factory settings set. These

settings should be changed according to the user's needs. The

main configuration can be performed via Teltonika Configurator

software. Get the latest Configurator version from here.

Configurator operates on Microsoft Windows OS and uses the

prerequisite MS .NET Framework. Make sure you have the correct

version installed.

Table 2 MS .NET requirements

MS .NET requirements

Operating

system

MS .NET Framework

version

Version

Links

Windows Vista

Windows 7

Windows 8.1

Windows 10

MS .NET Framework

5.0

32 and 64 bit

www.microsoft.com

Downloaded Configurator will be in compressed archive. Extract it

and launch Configurator.exe. After launch software language can

be changed by clicking in the right bottom corner (Figure 10

Language selection).

FMB965 |

Wiki

Figure 11 Device connected via USB

Figure 12 Configurator Status window

Configuration process begins by pressing on connected device

Figure 11 Device connected via USB).

After connection to Configurator Status window will be displayed

(Figure 12 Configurator Status window).

Various Status window tabs display information about GNSS,GSM,

I/O, Maintenance and etc. FMB965 has one user editable profile,

which can be loaded and saved to the device. After any

modification of configuration, the changes need to be saved to

device using Save to device button. Main buttons offer following

functionality:

1. Load from device –loads configuration from device.

2. Save to device –saves configuration to device.

3. Load from file –loads configuration from file.

4. Save to file –saves configuration to file.

5. Update firmware –updates firmware on device.

6. Read records –reads records from the device.

7. Reboot device –restarts device.

8. Reset configuration –sets device configuration to

default.

Most important configurator section is GPRS –where all your

server and GPRS settings can be configured and Data Acquisition –

where data acquiring parameters can be configured.

More details about FMB965 configuration using Configurator can

be found in our Wiki.

Figure 10 Language selection

FMB965 |

Wiki

Quick SMS configuration

Default configuration has optimal parameters present to ensure

best performance of track quality and data usage.

Quickly set up your device by sending this SMS command to it:

Note: Before SMS text, two space symbols should be inserted.

GPRS settings:

•

2001

–APN

•

2002

–APN username (if there

are no APN username, empty

field should be left)

•

2003

–APN password (if there

are no APN password, empty

field should be left)

Server settings:

•

2004

–Domain

•

2005

–Port

•

2006

–Data sending protocol

(0 –TCP, 1 –UDP)

Default configuration settings

Movement and ignition detection:

Vehicle movement will

be detected by

accelerometer

Ignition will be detected

by vehicle power voltage

between 13,2 –30 V

Device makes a record On Moving if one of these events happen:

300 seconds passes

Vehicle turns 10 degrees

Vehicle drives 100

meters

Speed difference

between last coordinate

and current position is

greater than 10 km/h

Device makes a record On Stop if:

1 hour passes while

vehicle is stationary

and ignition is off

Records sending to server:

If device has made a

record it is sent to the

server every 120

seconds

After successful SMS configuration, FMB965 device will synchronize

time and update records to configured server. Time intervals and

default I/O elements can be changed by using Teltonika

Configurator or SMS parameters.

" setparam

2001

:APN;

2002

:APN_username;

2003

:APN_password;

2004

:Domain;

2005

:Port;

2006

:0;"

FMB965 |

Wiki

Mounting recommendations

•Connecting Wires

▬Wires should be fastened to the other wires or non-moving

parts. Try to avoid heat emitting and moving objects near

the wires.

▬The connections should not be seen very clearly. If factory

isolation was removed while connecting wires, it should be

applied again.

▬If the wires are placed in the exterior or in places where they

can be damaged or exposed to heat, humidity, dirt, etc.,

additional isolation should be applied.

▬Wires cannot be connected to the board computers or

control units.

•Connecting power source

▬Be sure that after the car computer falls asleep, power is still

available on chosen wire. Depending on car, this may

happen in 5 to 30 minutes period.

▬When module is connected, measure voltage again to make

sure it did not decrease.

▬It is recommended to connect to the main power cable in

the fuse box.

▬Use 3A, 125V external fuse.

•Connecting ignition wire

▬Be sure to check if it is a real ignition wire i. e. power does not

disappear after starting the engine.

▬Check if this is not an ACC wire (when key is in the first position, most

of the vehicle electronics are available).

▬Check if power is still available when you turn off any of vehicles

devices.

▬Ignition is connected to the ignition relay output. As alternative, any

other relay, which has power output when ignition is on, may be

chosen.

•Connecting ground wire

▬Ground wire is connected to the vehicle frame or metal parts that are

fixed to the frame.

▬If the wire is fixed with the bolt, the loop must be connected to the

end of the wire.

▬For better contact scrub paint from the spot where loop is going to

be connected.

▬

PAY ATTENTION! Connecting the power supply must be

carried out in a very low impedance point of on-board vehicle

network. Connecting the GND at an arbitrary point to the

mass of the car is unacceptable, as static and dynamic

potentials on the line GND will be unpredictable, which can

lead to unstable FMB965 operation and even its failure.

Autres manuels pour FMB965

Table des matières

Autres manuels Teltonika GPS

Teltonika

Teltonika Telematics FMM650 Manuel utilisateur

Teltonika

Teltonika FMB130 Guide d'installation

Teltonika

Teltonika TMT250 Guide d'installation

Teltonika

Teltonika FMB140 Guide d'installation

Teltonika

Teltonika FMB920 Manuel utilisateur

Teltonika

Teltonika FMB209 Guide d'installation

Teltonika

Teltonika FMB650 Manuel utilisateur

Teltonika

Teltonika FMB130 Manuel utilisateur

Teltonika

Teltonika FMB122 Manuel utilisateur

Teltonika

Teltonika Telematics FMB150 Manuel utilisateur

Teltonika

Teltonika TAT140 Guide d'installation

Teltonika

Teltonika FMM003 Guide d'installation

Teltonika

Teltonika FM3001 Guide d'installation

Teltonika

Teltonika FMM80A Guide d'installation

Teltonika

Teltonika FM1110 Manuel utilisateur

Teltonika

Teltonika FMB920 Manuel utilisateur

Teltonika

Teltonika FMP100 Manuel utilisateur

Teltonika

Teltonika FM1110 Manuel utilisateur

Teltonika

Teltonika FMB630 Manuel utilisateur

Teltonika

Teltonika FMM130 Manuel utilisateur

Teltonika

Teltonika GH3000 Manuel

Teltonika

Teltonika WORKER BADGE PLUS Manuel utilisateur

Teltonika

Teltonika MSP500 Guide d'installation

Teltonika

Teltonika FMC800 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur