Telit Wireless Solutions GC864-QUAD-C9 Manuel d'installation

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

Disclaimer

The information contained in this document is the proprietary information of Telit

Communications S.p.A. and its affiliates (“TELIT”). The contents are confidential and

any disclosure to persons other than the officers, employees, agents or

subcontractors of the owner or licensee of this document, without the prior written

consent of Telit, is strictly prohibited.

Telit makes every effort to ensure the quality of the information it makes available.

Notwithstanding the foregoing, Telit does not make any warranty as to the

information contained herein, and does not accept any liability for any injury, loss or

damage of any kind incurred by use of or reliance upon the information.

Telit disclaims any and all responsibility for the application of the devices

characterized in this document, and notes that the application of the device must

comply with the safety standards of the applicable country, and where applicable,

with the relevant wiring rules.

Telit reserves the right to make modifications, additions and deletions to this

document due to typographical errors, inaccurate information, or improvements to

programs and/or equipment at any time and without notice. Such changes will,

nevertheless be incorporated into new editions of this application note.

as well as utilization of its contents and communication thereof to others without

express authorization are prohibited. Offenders will be held liable for payment of

damages. All rights are reserved.

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

Contents

1. INTRODUCTION ....................................................................................................................................4

1.1. SCOPE .............................................................................................................................................4

1.2. AUDIENCE ........................................................................................................................................4

1.3. CONTACT INFORMATION,SUPPORT .....................................................................................................4

1.4. DOCUMENT ORGANIZATION ................................................................................................................5

1.5. TEXT CONVENTIONS ..........................................................................................................................5

1.6. RELATED DOCUMENTS .......................................................................................................................6

1.7. DOCUMENT HISTORY .........................................................................................................................6

2. OVERVIEW ............................................................................................................................................7

2.1. VIEW OF GC864-QUAD-C9...............................................................................................................7

3. SYSTEM CHARACTERISTICS ..............................................................................................................8

3.1. POWER SUPPLY REQUIREMENTS ........................................................................................................8

3.2. GC864-QUAD-C9 MECHANICAL DIMENSIONS .....................................................................................9

3.3. GC864-QUAD-C9 MODULE CONNECTIONS........................................................................................10

3.3.1. ZIF Connector Pin-Out...........................................................................................................10

3.3.2. STAT LED.............................................................................................................................11

3.3.3. VAUX Power Supply..............................................................................................................11

3.3.3.1. VAUX1 Power Output ..................................................................................................................... 11

3.4. CONNECTIVITY TO THE ZIF INTERFACE...............................................................................................12

3.5. SERIAL PORTS ................................................................................................................................13

3.5.1. UART connectivity – serial port ..............................................................................................13

3.6. AUDIO SECTION OVERVIEW...............................................................................................................13

3.7. EXTERNAL SIM HOLDER IMPLEMENTATION .........................................................................................13

4. MOUNTING THE GC864-QUAD-C9 .....................................................................................................14

5. CONFORMITY ASSESSMENT ISSUES...............................................................................................15

6. SAFETY RECOMMENDATIONS..........................................................................................................16

7. LIST OF ACRONYMS ..........................................................................................................................17

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

1. Introduction

The information presented in this document is believed to be accurate and reliable.

However, no responsibility is assumed by Telit Communications S.p.A. for its use,

nor any infringement of patents or other rights of third parties which may result from

its use. No license is granted by implication or otherwise under any patent rights of

Telit Communications S.p.A. other than for circuitry embodied in Telit products. This

document is subject to change without notice.

1.1. Scope

The scope of this document is to provide a hardware description of the Telit GC864-

QUAD-C9 module, which is based on the Telit GE864-QUAD module and, as such,

only the added functionalities of the design will be taken into consideration.

1.2. Audience

This document is intended for customers integrating the GC864-QUAD-C9 in their

project.

1.3. Contact Information, Support

For general contact, technical support, to report documentation errors and to order

manuals, contact Telit’s Technical Support Center (TTSC) at:

TS-EMEA@telit.com

TS-NORTHAMERICA@telit.com

TS-LATINAMERICA@telit.com

TS-APAC@telit.com

Alternatively, use:

http://www.telit.com/en/products/technical-support-center/contact.php

For detailed information about where you can buy the Telit modules or for

recommendations on accessories and components visit:

http://www.telit.com

To register for product news and announcements or for product questions contact

Telit's Technical Support Center (TTSC).

Our aim is to make this guide as helpful as possible. Keep us informed of your

comments and suggestions for improvements.

Telit appreciates feedback from the users of our information.

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

1.4. Document Organization

This document contains the following chapters:

“Chapter 1: “Introduction” provides a scope for this document, target audience,

contact and support information, and text conventions.

“Chapter 2: “Overview”gives an overview of the features of the product.

“Chapter 3: “System Characteristics”describes in details the characteristics of the

product, providing information such as power supply requirements, mechanical

dimensions and interfaces specifics.

“Chapter 4: “Mounting the GC864-QUAD-C9”provides some recommendations to

follow while mounting the module onto the hosting application.

“Chapter 5: “Conformity Assessment Issues” provides some fundamental hints about

the conformity assessment that the final application might need.

“Chapter 6: “Safety Recommendation” provides some safety recommendations that

must be followed by the customer in the design of the application that makes use of

the GC864-QUAD-C9.

1.5. Text Conventions

Caution or Warning – Alerts the user to important points about integrating the

module, if these points are not followed, the module and end user equipment

may fail or malfunction.

Danger – This information MUST be followed or catastrophic equipment failure

or bodily injury may occur.

Tip or Information – Provides advice and suggestions that may be useful when

integrating the module.

All dates are in ISO 8601 format, i.e. YYYY-MM-DD.

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

1.6. Related documents

a. GE864 and GC864 Product description, 80273ST10008a

b. GE864 Hardware User Guide, 1vv0300694

c. Telit’s GSM/GPRS Family Software User Guide, 1vv0300784

d. AT Commands Reference Guide, 80000ST10025a

e. SIM Holder Design Guides, 80000NT10001a

f. Audio Settings Application Note, 80000NT10007a

1.7. Document History

Revision

Date

Changes

Location

2009-04-22

First issue

Trieste

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

2. Overview

The GC864-QUAD-C9 module has been designed to expand the original

functionalities of the GE864-QUAD module, integrating it onto PCB equipment

providing an extra ZIF connector interface and extra features described in the

following paragraphs.

NOTICE:

The GC864-QUAD-C9 provides the same characteristics of the GE864-QUAD, as far

as Quad-Band EGSM 850/900/1800/1900Mhz GSM and GPRS Class 10

technologies support and over the air firmware update by means of Premium FOTA

Management.

For further integration details (e.g. SIM Card Connectivity details, Hardware

Commands, etc.) that may not be explained in this document, refer to the Telit

documentation as specified in the related documents list (paragraph 1.6).

2.1. View of GC864-QUAD-C9

Figure 1 shows the position of pin 1 and pin 40 on the ZIF connector.

Figure 1

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

3. System characteristics

3.1. Power Supply Requirements

The power supply circuitry and board layout are a very important part in the full

product design and they strongly reflect on the product overall performances.

Latest improvements of the software allow the adoption of the following values:

Power Supply

Nominal Supply

Voltage

3.8 V

Max Supply

Voltage

4.5 V

Supply Voltage

Range

3.22 V – 4.5 V

Table 1

The recommended value of supply voltage is 3.8 V.

NOTICE:

Refer to the GE864-QUAD Hardware user guide (1vv0300694) for further information

about power supply requirements and consumptions about this family of Telit

modules.

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

3.2. GC864-QUAD-C9 Mechanical Dimensions

The Telit GC864-QUAD-C9 module overall dimensions are the following:

Length

54,5 mm

Width

36 mm

Thickness

3.7 mm

Figure 2

GC864-QUAD-C9 Hardware User Guide

1VV0300811 Rev. 0 – 2009-04-22

3.3. GC864-QUAD-C9 module connections

3.3.1. ZIF Connector Pin-Out

The following table (table 2) describes the pin-out configuration for the ZIF connector.

Pin Number

Function

In/Out

Pin Number

Function

In/Out

VBATT

Power

RTS

VBATT

Power

DTR

VBATT

Power

DCD

Out

VBATT

Power

SIM_IN

VBATT

Power

SIM-RST

Out

GND

Ground

SIM-IO

In/Out

GND

Ground

SIM-CLK

Out

GND

Ground

SIM-VCC

Out

GND

Ground

GND

Ground

GND

Ground

VRTC

Not Connected

Not

Connected

RESET

Input

Not Connected

Not

Connected

STAT-LED

Out

Vaux

Out

EAR_MT+

Analog

Output

Not Connected

Not

connected

EAR_MT-

Analog

Output

ON_OFF

EAR_HF+

Analog

Output

DSR

Out

EAR_HF-

Analog

Output

Out

MIC_HF+

Analog input

RXD

Out

MIC_HF-

Analog input

TXD

MIC_MT+

Analog input

CTS

Out

MIC_MT-

Analog input

Table 2

Table des matières

Autres manuels Telit Wireless Solutions Unité de contrôle

Telit Wireless Solutions

Telit Wireless Solutions ML865G1 Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions BlueMod+S42/AI Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions BlueMod plus S42/Central Guide de sécurité

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions LN940A11 SERIES Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869T3-I Fiche technique

Telit Wireless Solutions

Telit Wireless Solutions SE868SY-D Mode d’emploi

Telit Wireless Solutions

Telit Wireless Solutions GL865-DUAL V3 Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions SE867-AGPS Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions LE920 Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions GE866-QUAD Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions E922-3GR Series Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions G30 Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions M.2 N930 Series Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions NE866B1 Mode d’emploi

Telit Wireless Solutions

Telit Wireless Solutions WL865E4-P Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions UL865N3G Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions BlueMod+S42M Manuel d'utilisation

Telit Wireless Solutions

Telit Wireless Solutions LM960 Mode d’emploi

Telit Wireless Solutions

Telit Wireless Solutions GC864-QUAD-C2 Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions GE866-QUAD Manuel d'installation

Telit Wireless Solutions

Telit Wireless Solutions SL869-V3 EVK Fiche technique

Telit Wireless Solutions

Telit Wireless Solutions NE310H2 Mode d’emploi

Telit Wireless Solutions

Telit Wireless Solutions SE868-V3 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur