Telefunken TTV-299 Manuel utilisateur

MODEL: TTV-299

FULL ON SCREEN DISPLAY

228 PROGRAM MEMORY

WITH INFRARED REMOTE CONTROL

OWNER'S MANUAL

１

I. Safety and Precautions

………………………………………………………………….. 2

II. Installation

Antenna connection. ……………………………………………………………………… 3

Remote control Preparation ……………………………………………………………..

III. Control Location

Television…………………………………………………………………………………… 5

Remote control……………………………………………………………………………. 6

IV. Operating Instructions

Turn the power supply ON/OFF………………………………………………………….

V. TV operation

Program Selection…………………………………………………………………………… 8

Adjustment …………………………………………………………………… 9

Program preset (automatic search)

Program preset (Semi automatic search)

Fine tune

Skip over undesired Program number

Basic operation: Picture and sound control ……………………………………………… 12

Settin time …………………………………………………………………… 14

Sleep time, , auto volume limit settin …………………………………………………….

Set sleep Timer

Set automatic volume limit

Selection of blue back round and black stretch …………………………… 16

Technical operation: Sin le button hoppin , pro ram sequence. ……………………… 1

VI. Connection with Other Devices

Connect CD, VCD, DVD or other sound, picture and audio or video output

devices

………………………………………………………………………………. 18

VII. Miscellaneous

Guide to simple trouble-shootin …………………………………………………………. 19

Specification ………………………………………………………………………………… 20

Packin ……………………………………………………………………………………… 20

Contents

Dear Customer:

Thank you for purchasin our latest TV set.

Please read this instruction manual carefully fir

st before operation so that

you can use it in a safe and reliable manner. Please also store it safely for

future reference.

２

To ensure safe and reliable operation of the TV set, please observe the following precautions in

installation, operation and maintenance.

Attention

ttentionttention

ttention:

: :

１·Pay attention to the power supply cord before installing the TV set. Do not hang anything on the

cord, and avoid treading on the cord.

２·The slots on the back housing are designed for ventilation to prevent overheating. They must

never be covered or blocked. The TV set must not be placed near a heat source such as radiator, air ducts

direct sunlight.

３·The outdoor antenna must not be erected close to HV lines or other power supply lines. Use

extreme care when erecting the antenna.

4·This TV must be connected to AC 240V 50Hz. Never connect to DC supply or any other power

supply

5·Do not let any object fall into the ventilation openings of the TV set housing, nor let any liquid

flow into the it via the openings. This may cause the television to short circuit

6·Do not subject the TV set to rain, or use it in damp environment. In cleaning dust, be sure to

remove the power supply plug from its socket first. Do not clean the housing directly with liquid

detergent, use a damp cloth. Be sure to remove the power supply plug from its socket and remove the

antenna plug during a thunderstorm or when it will not be used for long time, to avoid components being

damaged by lightning.

·If you use an indoor antenna, do not let it touch any electrical appliance, or normal reception of

TV program may be affected.

Safety:

Safety:Safety:

Safety:

1Never open the rear of the television . High Voltage components can cause fire, electric shock or

injury. All internal work should be carried out by qualified TV service personnel only

2. Remove the power supply plug from its socket in case of the following conditions, and consult

with service personnel.

(1) The power cord and plug is damaged or cracked.

(2) Any object has fallen into or liquid flown into the TV set.

(3) The performance of TV set has deteriorated significantly or there is damage on the housing.

(4) The TV set will not operate normally according to the instructions.

3. Please remove the power supply plug from its socket when the TV set will not be used for long

time.

Safety and Precautions

３

 First read carefully the relevant instructions in

“Safety and precautions”.

 Place the TV set in the room where there is no direct sunlight on it. Any light reflecting from the

screen will cause eye fatigue.

 Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~ times the

screen height

 Keep a space of 10 cm or over between the TV set and wall for good ventilation

 Never put the TV set at location with excessive temperature or moisture, to avoid damage or failure of

its components

Automatic demagnetizing

A colour TV set is likely to be affected by magnetic field, to cause stain on screen or colour

distortion. If the TV set is moved while on, turned or affected by a magnetic object nearby, turn off the

power supply and wait for at least 1 hour to turn it on again, to ensure that the automatic demagnetizing

circuit will work normally again, to eliminate the effect of magnet on colour and resume the vivid

pictures.

To ensure best reception, use outdoor antenna or cable antenna (CATV). The type and location of

antennas shall vary with places.

Notes:  Connect the outdoor antenna as shown above, and also install a lightning arrester and perform

periodical checking and repair.

 It is suggested that a 5Ω coaxial cable be used, to eliminate interference or noise due to

improper matching of impedance.

 The cable must not be tied together with supply cord.

(300Ω-75Ω)

(75Ω)

(300Ω)

Installation

Antenna connection method

４

Installin the batteries

Precautions in operatin the remote controller

● Aim the remote control at the infrared receiving window on the TV set.

● Do not press the keys on the remote control quickly and continuously.

● If the remote control will not be used for long time or if the batteries are flat, please take the batteries

out to prevent leaking.

● Never throw the battery into fire, and properly dispose of the used batteries.

● Take care not to drop, wet or dismantle the remote control.

Remove the sliding cover

from the remote control.

Load two Size AAA batteries into the

chamber, with the +/- poles of batters in line

with the +/- marks.

Installation

Remote Control Preparation

５

654 3 21

V-MENU P-TV/AV

P+ V+

The control buttons are in the front of the TV (below the picture tube), behind the cover.

1. Main power switch

2. Remote control sensor

3. Power indicator

4. Program number up (+) and down (-)

5. Volume up (+) and down (-)

6. Menu button

. TV/AV button

8. AV socket

9. Antenna input and AV IN/OUT terminals

Control Location

Television

Front Panel & Input/ Output Terminals

６

Buttons on remote controller:

1. AV status switch button

2. TV switchover

3. Sound system button

4. Game button

5. AVL button

6. Clock button

. Volume UP/DOWN button

8. Prog.swap button

9. Tuning button

10. Feature button

11. Direct Program number buttons

13. Standby button

14. Screen display button

15. Colour system button

16. I/II button (The button is non-functional.)

1 . Effect button (The button is non-functional.)

18. Timing button

19. Program number Up/Down button

20. Menu button

21. Picture button

22. Sound button

23. Program back view button

Names and Functions of Controls

Remote control

７

12. Mute button

24. Picture Mode button

1. Press the power switch, the power indicator will be on, and after several seconds, the tv

set will begin normal operation.

2. Press the

button on the remote controller, the television will be in standby mode and

The power indicator will be on but the screen off. In this mode, press the

button on

the remote control or the direct program number buttons (0-9). (You can also turn it on

by pressing the “P+” button)

Note: To ensure normal operation at all times, never turn the television on and off

frequently. Wait for at least 5 seconds before turnin it on a ain.

3. Selecting the “

” button on the remote control will place the Internet section of the

Television in standby mode; press the “

” button again to turn it on again.

4. If you want to completely turn off the power supply, please press the main power switch

on the TV set.

Note: Do not leave the television in standby mode for a lon time. Please turn off the

power switch if the TV set will not be used for lon time.

Operatin Instructions

Turn the power supply ON/OFF

８

1 Selecting a desired program

Use the direct Pro ram number Selection buttons

Press the number buttons 0-9 on the remote control to select the single digit program

number (0-9).

Press the “-/--” button on the remote control to display to select double-digit programs.

You can press number buttons 0-9 to select Program number (10-99), by first selecting the

tenth digit then the unit digit; after pressing the “-/--” button to display “---”, you can press

number buttons 0-9 to select Program number 100-22 Program number, by first selecting

the hundredth digit, then the tenth digit and then the unit digit.

Use the Pro ram number Up/Down Button “P+” “P-” buttons

Pressing “P+” will select a Program number in by increasing numbers.

Pressing “P-” will select a Program number in by decreasing numbers.

2 Adjust the volume by Volume “V+/V-” button.

3 If the colour or sound of a channel is not normal, it may be an incorrect setting of colour

or sound system, and it can be adjusted as described below:

press the MENU button 3 times consecutively, so that the screen will display the

following menu (or select the FEATURE button)

● If the picture colour is not normal

Press P+/P- to select “COLOUR” (it turns from white to green), then press “V+/V-” to

select the correct colour system.

AUTO→PAL →NTSC 4.43→NTSC 3.58 will appear in turn.

●

●●

●

If the sound is not normal

Press the SOUND SYSTEM button repeatedly on the remote controller to select the

correct sound system. Alternatively highlight the SOUND option under the FEATURE

menu using P+ or P-. Then use V+ or V- to change to BG system within the following

selection sequence:

→

Australia isPAL BG

Note: If you are using the television for the first time, please first use the auto search and

store the programs as described in “Adjustment” on page 9.

Program Selection

TV Operation

FEATURE

COLOUR

COLOUR COLOUR

COLOUR

AUTO

AUTO AUTO

AUTO

SOUND DK

BLUE SCREEN ON

９

1 Pro ram preset (auto search)

When you turn on the TV set for the first time, you must select the “MENU” button

continuously on the TV or the remote control, so that the following menu is displayed

on the screen:

Use “P+/P-” button to select “AUTO STORE” option (it turns from white to green),

then press “V+” button to begin the auto search. The following menu is displayed on the

screen. During auto search, you can press any button to stop the search.

During auto search, the selected programs will be automatically memorized, and be

stored from the current Program number If the number of searched programs has exceeded

the maximum Program number to be stored, the auto searching will stop automatically; If

the number of searched programs does not exceed the maximum Program number to be

stored, at the end of auto search, all the Program numbers not stored with program will be

set as “SKIP ON”.

At the end of auto search, the Program number will jump automatically to the first

Program number

2 Pro ram preset (Manual Tunin )

If the auto search function cannot find the desired channel, or you want to preset the

desired channels to a designated Channel number one by one, please use the manual tuning

search function.

TV Operation

Start operation: Adjustment

1 11111

AUTO STORE

VHF-L

AUTO

TUNING

PROG. 1

AUTO STORE

AUTO STOREAUTO STORE

AUTO STORE

FREQ.FINE

BAND VHF-L

SKIP OFF

Table des matières

Autres manuels Telefunken TV

Telefunken

Telefunken 75TU6200 Manuel utilisateur

Telefunken

Telefunken DF 316 ET Manuel utilisateur

Telefunken

Telefunken TE24550B42V2E Manuel utilisateur

Telefunken

Telefunken TFL3282B13 Manuel utilisateur

Telefunken

Telefunken D32H125A3C Manuel utilisateur

Telefunken

Telefunken DF321C Manuel utilisateur

Telefunken

Telefunken UMBRA40UHD Manuel utilisateur

Telefunken

Telefunken TE32550B42V2D Manuel utilisateur

Telefunken

Telefunken TK1429X Manuel utilisateur

Telefunken

Telefunken TFK 22 DS 19 B Manuel utilisateur

Telefunken

Telefunken T7068TL Manuel utilisateur

Telefunken

Telefunken TK2129ST Manuel utilisateur

Telefunken

Telefunken S590NIC Manuel utilisateur

Telefunken

Telefunken DF321C Manuel utilisateur

Telefunken

Telefunken Telefunken M G 1 4 7 6 C T Manuel utilisateur

Telefunken

Telefunken TE24550B40Q2D Manuel utilisateur

Telefunken

Telefunken TK3429STX Manuel utilisateur

Telefunken

Telefunken TFLS425090FHDB Manuel utilisateur

Telefunken

Telefunken TE32551B40Q2D Manuel utilisateur

Telefunken

Telefunken WS2868N Manuel utilisateur

Telefunken

Telefunken TE43550S39U2P Manuel utilisateur

Telefunken

Telefunken TKP2147STX Manuel utilisateur

Telefunken

Telefunken L22F137D2 Manuel utilisateur

Telefunken

Telefunken TFL65FHD200BC Manuel utilisateur

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur