Tektronix SDA601 Manuel utilisateur

Service Manual

SDA601

Serial Digital Analyzer

070-8914-04

Warning

The servicing instructions are for use by qualified

personnel only. To avoid personal injury, do not

perform any servicing unless you are qualified to

do so. Refer to all safety summaries prior to

performing service.

www.tektronix.com

suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes

that in all previously published material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14200 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

HIn North America, call 1-800-833-9200.

HWorldwide, visit www.tektronix.com to find contacts in your area.

Warranty 2

Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year

from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its option, either

will repair the defective product without charge for parts and labor, or will provide a replacement in exchange for the

defective product. Parts, modules and replacement products used by Tektronix for warranty work may be new or

reconditioned to like new performance. All replaced parts, modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the

warranty period and make suitable arrangements for the performance of service. Customer shall be responsible for

packaging and shipping the defective product to the service center designated by Tektronix, with shipping charges prepaid.

Tektronix shall pay for the return of the product to Customer if the shipment is to a location within the country in which the

Tektronix service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any

other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate

maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting

from attempts by personnel other than Tektronix representatives to install, repair or service the product; b) to repair

damage resulting from improper use or connection to incompatible equipment; c) to repair any damage or malfunction

caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or integrated with other

products when the effect of such modification or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER

WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’

RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY

PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL

NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY

OF SUCH DAMAGES.

SDA 601 Serial Digital Analyzer i

Table of Contents

General Safety Summary vii...................................

Service Safety Summary ix....................................

Specifications

Introduction 1--1.....................................................

Reference Documentation 1--1..........................................

Performance Conditions 1--1...........................................

Specification Tables 1--2..............................................

Certifications and Compliances 1--4.....................................

Operating Information

Getting Started 2--1..................................................

Supplying Power 2--1.................................................

Connecting the SDA601 2--3...........................................

SERIAL INPUT 2--4..............................................

AUX Output 2--4.................................................

RS-232 Interface 2--4.............................................

Keypad and Display Conventions 2--8....................................

The On-Screen Display (OSD) 2--9......................................

Preliminary Settings 2--10..............................................

Set the Date and Time 2--10.........................................

Set the Battery Type 2--11...........................................

Enable (Disable) Auto Power Off 2--11................................

Disable (Enable) Timed LCD Backlight Turn Off 2--12....................

Performance Verification 2--12..........................................

Using Your SDA601 2--12..............................................

Analyzing a Signal 2--13............................................

Watching a Signal 2--15............................................

Alarms 2--19.....................................................

LCD Display Modes 2--20..........................................

AUX Output Modes 2--23...........................................

Saving and Recalling Presets 2--25....................................

Software Reset 2--26...............................................

Performance Verification

Required Test Equipment 3--1..........................................

Performance Verification Checklist 3--3..................................

Performance Verification Procedures 3--4.................................

Preparation 3--4..................................................

Procedures 3--6..................................................

Adjustment Procedures

Required Test Equipment 4--1..........................................

Adjustment Procedures 4--2............................................

Table of Contents

ii SDA 601 Serial Digital Analyzer

Adjust SLM (Signal Level Meter) 4--2................................

Adjust the Deserializer VCO (“Serial Pot”) 4--4.........................

Set the Date and Time 4--7.........................................

Maintenance

Maintenance 5--1..............................................

Battery Hints 5--1....................................................

Preventive Maintenance 5--1...........................................

Cleaning 5--1....................................................

Static-Sensitive Components 5--2....................................

Troubleshooting Aids 5--3.............................................

Foldout Pages 5--3................................................

Diagrams 5--3...................................................

Circuit Board Illustrations 5--3......................................

Numbering 5--3..................................................

Self-Diagnostics 5--4..............................................

Corrective Maintenance 5--9...........................................

Obtaining Replacement Parts 5--9....................................

Torque Specification 5--9..........................................

Replacing Assemblies 5--10.........................................

Replaceable Electrical Parts

Replaceable Electrical Parts 6--1.................................

Parts Ordering Information 6--1.........................................

Using the Replaceable Electrical Parts List 6--1............................

Abbreviations 6--1................................................

List of Assemblies 6--2............................................

Column Descriptions 6--2..............................................

Replaceable Electrical Parts 6--4........................................

Diagrams

Diagrams and Circuit Board Illustrations 7--1.....................

Block Diagrams 7--1.................................................

Circuit Board Illustrations 7--3..........................................

Replaceable Mechanical Parts

Replaceable Mechanical Parts 8--1...............................

Parts Ordering Information 8--1.........................................

Using the Replaceable Mechanical Parts List 8--1...........................

Abbreviations 8--1................................................

Chassis Parts 8--2................................................

Column Descriptions 8--2..............................................

Replaceable Mechanical Parts 8--3.......................................

Index

Table of Contents

SDA 601 Serial Digital Analyzer iii

List of Figures

Figure 2--1: Opening the Battery Compartment 2--2.................

Figure 2--2: Connecting the SDA601 2--3..........................

Figure 2--3: Connecting to a DTE Device with a DB25 Serial Port 2--5..

Figure 2--4: Connecting to a DCE Device with a DB25 Serial Port 2--6.

Figure 2--5: A Printed Analysis Report 2--7........................

Figure 2--6: The Default “Watching” OSD 2--9.....................

Figure 2--7: The Initial SDA601 Utility Menu Display 2--10............

Figure 2--8: The Set Time Display 2--10............................

Figure 2--9: Front and side views 2--13.............................

Figure 2--10: The Analyze OSD 2--14..............................

Figure 2--11: The Initial SDA601 Utility Menu Display 2--16...........

Figure 2--12: The SDA601 “Watching” Display 2--17.................

Figure 2--13: Watch Errors Reported on the OSD 2--18...............

Figure 2--14: The Display Mode Selection Keys 2--21.................

Figure 2--15: The SDA601 Signal Level Display 2--21.................

Figure 2--16: The Cursor Data Display 2--22........................

Figure 2--17: The SDA601 Time Display 2--23.......................

Figure 2--18: The First Review Display 2--23........................

Figure 3--1: An Equipment Setup for Performance Verification 3--4...

Figure 3--2: AUX Output Containing the On-Screen Display (OSD) 3--5

Figure 3--3: The Initial SDA601 Utility Menu Display 3--6............

Figure 3--4: The TSG601 Display Indicating Normal CRCs 3--7.......

Figure 3--5: The Analyze OSD 3--8...............................

Figure 3--6: The TSG601 Display Indicating an Erroneous FFCRC 3--9

Figure 3--7: The TSG601 Display Indicating an Erroneous APCRC 3--9

Figure 3--8: The TSG601 Display Indicating a Zero APCRC 3--10......

Figure 3--9: The SDA601 Cursor Display 3--11......................

Figure 3--10: The First Watch Menu Display 3--12...................

Figure 3--11: The I/O Menu/Highlighting Item Display 3--12...........

Figure 3--12: Page Five of the Watching OSD 3--15...................

Figure 3--13: SDA601-to-PC Cable Connections 3--16................

Figure 3--14: Initial Return Loss Setup 3--17........................

Figure 4--1: A Setup for SLM Adjustment 4--2.....................

Figure 4--2: The First SLM Calibration Display 4--3.................

Table of Contents

iv SDA 601 Serial Digital Analyzer

Figure 4--3: A Setup for Adjusting the De-serializer VCO 4--5........

Figure 4--4: The “Adj Serial Pot” Menu Item 4--5...................

Figure 4--5: The VCO Lock Error Indicator 4--6....................

Figure 4--6: The “Set Time” Display 4--7..........................

Figure 5--1: Numeric SLM Data 5--7..............................

Figure 5--2: The SDA Number Keys 5--7...........................

Figure 5--3: Exploded View of the SDA601 5--10.....................

Table of Contents

SDA 601 Serial Digital Analyzer v

List of Tables

Table 1--1: Serial Digital Video Input 1--2.........................

Table 1--2: Signal Level Meter 1--2...............................

Table 1--3: AUX Output 1--2.....................................

Table 1--4: Power Supply 1--2...................................

Table 1--5: Physical Characteristics 1--3...........................

Table 1--6: Environmental Characteristics 1--3.....................

Table 2--1: RS-232 Connector Pin Assignments 2--5.................

Table 3--1: Required Test Equipment 3--1.........................

Table 3--2: Initial Settings for the Video Measurement Set 3--5.......

Table 4--1: Required Test Equipment 4--1.........................

Autres manuels pour SDA601

Table des matières

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix WFM5200 series Manuel d'utilisation et d'entretien

Tektronix

Tektronix P6339A Manuel utilisateur

Tektronix

Tektronix CSA 803C Manuel utilisateur

Tektronix

Tektronix P7330 Manuel utilisateur

Tektronix

Tektronix 576 Manuel utilisateur

Tektronix

Tektronix DAS NT Option 04 Manuel utilisateur

Tektronix

Tektronix 495 Manuel utilisateur

Tektronix

Tektronix 7L5 Manuel utilisateur

Tektronix

Tektronix CSA8000 Series Manuel utilisateur

Tektronix

Tektronix P6417 Manuel utilisateur

Tektronix

Tektronix DPO7OE1 Manuel utilisateur

Tektronix

Tektronix MTM400 Manuel utilisateur

Tektronix

Tektronix P6205 Manuel utilisateur

Tektronix

Tektronix FCA3000 Series Manuel utilisateur

Tektronix

Tektronix RF Scout Manuel

Tektronix

Tektronix BPA100 Manuel utilisateur

Tektronix

Tektronix CSA8000B Series Manuel utilisateur

Tektronix

Tektronix RSA3408A Manuel utilisateur

Tektronix

Tektronix CM-9930 Manuel utilisateur

Tektronix

Tektronix Keithley SourceMeter 2470 Manuel utilisateur

Tektronix

Tektronix P6248 Manuel utilisateur

Tektronix

Tektronix NetTek Y400 Instructions d'installation et d'entretien

Tektronix

Tektronix TDP4000 Manuel d'utilisation et d'entretien

Tektronix

Tektronix VM Series Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur