Tektronix RSA503A Manuel utilisateur

RSA503A and RSA507A

Real-Time Spectrum Analyzers

Installation and Safety

ZZZ

Instructions

*P071345200*

071-3452-00

RSA503A and RSA507A

Real-Time SpectrumAnalyzers

Installation and Safety

ZZZ

Instructions

Click the following link to protect your product.

►www.tek.com/register

www.tek.com

071-3452-00

owned by Tektronix or its subsidiaries or suppliers, and are protected by national

Tektronix products are covered by U.S. and foreign patents, issued and pending.

Information in this publication supersedes that in all previously published

material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tek.com to ﬁnd contacts in your area.

Warranty

Tektronix warrants that this product will be free from defects in materials and

workmanship for a period of three (3) years from the date of shipment. If any such product

proves defective during this warranty period, Tektronix, at its option, either will repair

the defective product without charge for parts and labor, or will provide a replacement

in exchange for the defective product. Parts, modules and replacement products used by

Tektronix for warranty work may be new or reconditioned to like new performance. All

replaced parts, modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the warranty period and make suitable arrangements for the

performance of service. Customer shall be responsible for packaging and shipping the

defective product to the service center designated by Tektronix, with shipping charges

prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to

a location within the country in which the Tektronix service center is located. Customer

shall be responsible for paying all shipping charges, duties, taxes, and any other charges

for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel other

than Tektronix representatives to install, repair or service the product; b) to repair damage

resulting from improper use or connection to incompatible equipment; c) to repair any

damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a

product that has been modiﬁed or integrated with other products when the effect of such

modiﬁcation or integration increases the time or difﬁculty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE

PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED.

TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX'

RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE

SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR

BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADV

ANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

[W4 – 15AUG04]

Table of Contents

Important safety information ........................................... ii

General safety summary........................................... ii

Terms in this manual............................................... iv

Symbols and terms on the product................................ iv

Preface..................................................................... v

Key Features........................................................ vi

Standard accessories . .... .... ........ .... ......... ... ......... .... . vi

Product options................................................... viii

Optional accessories ... ......... .... .... .... .... .... .... .... .... . viii

Service options ................................................... viii

Documentation ...................................................... x

Installation ................................................................ 1

Prepare the PC....................................................... 1

Battery pack ......................................................... 3

AC adapter........................................................... 7

Functional check .................................................... 8

Front panel......................................................... 11

Operating requirements ................................................ 15

Cooling requirements ............................................. 15

Environmental requirements ..................................... 16

Electrical ratings................................................... 17

Cleaning............................................................ 18

Compliance information ............................................... 19

EMC compliance.................................................. 19

Safety compliance................................................. 21

Environmental considerations.................................... 23

RSA500A Series Installation and Safety Instructions i

Important safety information

This manual contains information and warnings that must be followed

by the user for safe operation and to keep the product in a safe condition.

General safety summary

Use the product only as speciﬁed. Review the following safety

precautions to avoid injury and prevent damage to this product or any

products connected to it. Carefully read all instructions. Retain these

instructions for future reference.

Comply with local and national safety codes.

For correct and safe operation of the product, it is essential that you

follow generally accepted safety procedures in addition to the safety

precautions speciﬁed in this manual.

The product is designed to be used by trained personnel only.

Only qualiﬁed personnel who are aware of the hazards involved should

remove the cover for repair, maintenance, or adjustment.

This product is not intended for detection of hazardous voltages.

While using this product, you may need to access other parts of a larger

system. Read the safety sections of the other component manuals for

warnings and cautions related to operating the system.

When incorporating this equipment into a system, the safety of that

system is the responsibility of the assembler of the system.

To avoid ﬁre or personal injury

Use proper AC adapter. Use only the AC adapter speciﬁed for this

product.

Use proper power cord. Use only the power cord speciﬁed for this

product and certiﬁed for the country of use. Do not use the provided

power cord for other products.

ii RSA500A Series Installation and Safety Instructions

Important safety information

Connect and disconnect properly. Do not connect or disconnect probes

or test leads while they are connected to a voltage source.

Observe all terminal ratings. To avoid ﬁre or shock hazard, observe all

ratings and markings on the product. Consult the product manual for

further ratings information before making connections to the product.

Do not apply a potential to any terminal, including the common

terminal, that exceeds the maximum rating of that terminal.

The measuring terminals on this product are not rated for connection to

mains or Category II, III, or IV circuits.

Do not operate without covers. Do not operate this product with covers

or panels removed, or with the case open.

Avoid exposed circuitry. Do not touch exposed connections and

components when power is present.

Do not operate with suspected failures. If you suspect that there is damage

to this product, have it inspected by qualiﬁed service personnel.

Disable the product if it is damaged. Do not use the product if it is

damaged or operates incorrectly. If in doubt about safety of the product,

turn it off and disconnect the power. Clearly mark the product to prevent

its further operation.

Examine the exterior of the product before you use it. Look for cracks

or missing pieces.

Use only speciﬁed replacement parts.

Replace batteries properly. Replace batteries only with the speciﬁed

type and rating.

Recharge batteries properly. Recharge batteries for the recommended

charge cycle only.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry. Remove the input signals before

you clean the product.

RSA500A Series Installation and Safety Instructions iii

Important safety information

Provide proper ventilation. Refer to the installation instructions in the

manual for details on installing the product so it has proper ventilation.

Provide a safe working environment. Avoid improper or prolonged use of

keyboards, pointers, and button pads. Improper or prolonged keyboard

or pointer use may result in serious injury.

Be sure your work area meets applicable ergonomic standards. Consult

with an ergonomics professional to avoid stress injuries.

Use only the Tektronix rackmount hardware speciﬁed for this product.

Terms in this manual

These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could

result in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that could

result in damage to this product or other property.

Symbols and terms on the product

These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you

read the marking.

WARNING indicates an injury hazard not immediately accessible

as you read the marking.

CAUTION indicates a hazard to property including the product.

iv RSA500A Series Installation and Safety Instructions

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix TPA-N-VPI Manuel utilisateur

Tektronix

Tektronix P6021 Manuel utilisateur

Tektronix

Tektronix OM4106D Manuel utilisateur

Tektronix

Tektronix LumaColor II J18 Manuel utilisateur

Tektronix

Tektronix A622 Manuel utilisateur

Tektronix

Tektronix 7D20 Manuel utilisateur

Tektronix

Tektronix WVR6UP Manuel utilisateur

Tektronix

Tektronix TTR500 series Manuel utilisateur

Tektronix

Tektronix MSO 4 Series Manuel d'instructions

Tektronix

Tektronix DSA8300 Manuel utilisateur

Tektronix

Tektronix A621 Manuel utilisateur

Tektronix

Tektronix RSA5100A Series Manuel utilisateur

Tektronix

Tektronix WVR7200 Guide de l'utilisateur

Tektronix

Tektronix TLA 714 Manuel utilisateur

Tektronix

Tektronix TLA715 Series Manuel utilisateur

Tektronix

Tektronix ATECTekRanger Manuel utilisateur

Tektronix

Tektronix RSA306B Manuel

Tektronix

Tektronix TLA6000 Series Manuel utilisateur

Tektronix

Tektronix RSA5100A Series Manuel utilisateur

Tektronix

Tektronix P6248 Manuel utilisateur

Tektronix

Tektronix P6112 Manuel utilisateur

Tektronix

Tektronix DTM500 Series Manuel d'utilisation et d'entretien

Tektronix

Tektronix Keithley 4200A-SCS Manuel

Tektronix

Tektronix TCP312 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur