Tektronix P6339A Manuel utilisateur

Form 080/01

Complimentary Reference Material

This PDF has been made available as a complimentary service for you to assist in

evaluating this model for your testing requirements.

T G offers a wide range of test equipment solutions, from renting short to long

term, buying refurbished and purchasing new. Financing options, such as

Financial Rental, and Leasing are also available on application.

T G will assist if you are unsure whether this model will suit your requirements.

Call T G if you need to organise repair and/or calibrate your unit.

If you click on the “Click-to-Call” logo below, you can all us for FREE!

TMG Corporate Website TMG Products Website

Disclaimer:

All trademarks appearing within this PDF are trademarks of their respective owners.

Instruction Manual

P6339A

500 MHz Buffered Passive Probe

071-0178-01

Warning

The servicing instructions are for use by qualified

personnel only. To avoid personal injury, do not

perform any servicing unless you are qualified to

do so. Refer to all safety summaries prior to

performing service.

www.tektronix.com

Tektronix products are covered by U.S. and foreign patents, issued and

pending. Information in this publication supercedes that in all previously

published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077

TEKTRONIX, TEK, TEKPROBE, and SureFoot are registered trademarks of

Tektronix, Inc. KlipChip is a trademark of Tektronix, Inc.

WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from defects

in materials and workmanship for a period of one (1) year from the date of shipment. If a

product proves defective during this warranty period, Tektronix, at its option, either will

repair the defective product without charge for parts and labor, or will provide a

replacement in exchange for the defective product.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the warranty period and make suitable arrangements for the

performance of service. Customer shall be responsible for packaging and shipping the

defective product to the service center designated by Tektronix, with shipping charges

prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to

a location within the country in which the Tektronix service center is located. Customer

shall be responsible for paying all shipping charges, duties, taxes, and any other charges for

products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel other

than Tektronix representatives to install, repair or service the product; b) to repair damage

resulting from improper use or connection to incompatible equipment; c) to repair any

damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a

product that has been modified or integrated with other products when the effect of such

modification or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER

WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS

DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY

TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND

EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF

THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE

FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR

HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

P6339A Instruction Manual i

Table of Contents

General Safety Summary v. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Service Safety Summary vii. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contacting Tektronix ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Getting Started 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Features and Accessories 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Optional Accessories 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Functional Check 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TekProbe Communication 5. . . . . . . . . . . . . . . . . . . . . . . . . .

DC Offset 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DC Gain and Attenuation 6. . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating Basics 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Probe Compensation 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum Input Voltage 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

High-Frequency Probe Connections 8. . . . . . . . . . . . . . . . . . . . .

Specifications 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adjustment and Verification Procedures 15. . . . . . . . . . . . . . .

Equipment Required 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preparation 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Remove the Top Cover 17. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Prepare the Equipment 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adjustment Locations 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Procedures 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HF Adjust 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Compensate the Probe 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Rise Time and Aberrations 21. . . . . . . . . . . . . . . . . . . . . . . . .

Output Zero Adjust 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DC Attenuation Accuracy 22. . . . . . . . . . . . . . . . . . . . . . . . . .

Rise Time Check 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reset DIP Switches and Install Cover 26. . . . . . . . . . . . . . . . .

Test Record 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

ii P6339A Instruction Manual

Maintenance 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cleaning 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Replacing TekProbe Interface Pins 32. . . . . . . . . . . . . . . . . . . . . .

Removing and Replacing the TekProbe Interface Collar 33. . . . .

Removing and Replacing the Cable Assembly 34. . . . . . . . . . . . .

Replaceable Parts 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

P6339A Instruction Manual iii

List of Figures

Figure 1: SMK4 Micro KlipChip adapter 4. . . . . . . . . . . . . . .

Figure 2: Probe compensation waveforms 7. . . . . . . . . . . . . .

Figure 3: Ground lead effects 8. . . . . . . . . . . . . . . . . . . . . . . . .

Figure 4: Voltage derating, typical 11. . . . . . . . . . . . . . . . . . . . .

Figure 5: Input impedance, typical 12. . . . . . . . . . . . . . . . . . . .

Figure 6: Input phase, typical 12. . . . . . . . . . . . . . . . . . . . . . . . .

Figure 7: Location adjustments and DIP switches 18. . . . . . . .

Figure 8: Setup for probe compensation and high frequency

adjustment 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figure 9: Probe compensation waveforms 20. . . . . . . . . . . . . .

Figure 10: Setup for rise time and aberrations 21. . . . . . . . . . .

Figure 11: Setup for the output offset adjustment 22. . . . . . . .

Figure 12: Setup for DC attenuation accuracy 23. . . . . . . . . . .

Figure 13: Setup for rise time check 25. . . . . . . . . . . . . . . . . . .

Figure 14: Replacing TekProbe interface pins 32. . . . . . . . . . .

Figure 15: Replacing the TekProbe collar 33. . . . . . . . . . . . . . .

Figure 16: Replacing the cable assembly 34. . . . . . . . . . . . . . . .

Figure 17: P6339A replaceable parts and standard

accessories 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

iv P6339A Instruction Manual

List of Tables

Table 1: Features and accessories 2. . . . . . . . . . . . . . . . . . . . .

Table 2: Electrical specifications 9. . . . . . . . . . . . . . . . . . . . . .

Table 3: Environmental characteristics 11. . . . . . . . . . . . . . . .

Table 4: Physical characteristics 13. . . . . . . . . . . . . . . . . . . . . .

Table 5: Certifications and compliances 13. . . . . . . . . . . . . . . .

Table 6: Test equipment 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 7: DIP switch/attenuation settings 19. . . . . . . . . . . . . . .

Table 8: Input voltages for DC attenuation accuracy

adjustment 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 9: Settings for rise time check 26. . . . . . . . . . . . . . . . . . .

P6339A Instruction Manual v

General Safety Summary

Review the following safety precautions to avoid injury and prevent

damage to this product or any products connected to it. To avoid

potential hazards, use this product only as specified.

Only qualified personnel should perform service procedures.

To Avoid Fire or Personal Injury

Connect and Disconnect Properly. Connect the probe output to the

measurement instrument before connecting the probe to the circuit

under test. Disconnect the probe input and the probe ground from the

circuit under test before disconnecting the probe from the measure-

ment instrument.

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all

ratings and markings on the product. Consult the product manual for

further ratings information before making connections to the product.

The common terminal is at ground potential. Do not connect the

common terminal to elevated voltages.

Do Not Operate Without Covers. Do not operate this product with

covers or panels removed.

Do Not Operate With Suspected Failures. If you suspect there is damage

to this product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Table des matières

Autres manuels Tektronix Instrument de mesure

Tektronix

Tektronix P6139B Manuel utilisateur

Tektronix

Tektronix TLA6401 Manuel utilisateur

Tektronix

Tektronix Keithley 2651A Manuel utilisateur

Tektronix

Tektronix FCA3100 Series Guide de l'administrateur

Tektronix

Tektronix AM503S Manuel utilisateur

Tektronix

Tektronix RSA306 Guide de référence

Tektronix

Tektronix Keithley 4200A-SCS Manuel utilisateur

Tektronix

Tektronix RSA306B Manuel

Tektronix

Tektronix P6202A Manuel utilisateur

Tektronix

Tektronix TAP1500 Manuel utilisateur

Tektronix

Tektronix 2715 Manuel utilisateur

Tektronix

Tektronix P6248 Manuel utilisateur

Tektronix

Tektronix KEITHLEY 4200A-SCS-PKC Manuel utilisateur

Tektronix

Tektronix KEITHLEY 4200-CVU-PWR Manuel utilisateur

Tektronix

Tektronix OI tek P5200A Series Manuel

Tektronix

Tektronix VM700A VMTB Manuel utilisateur

Tektronix

Tektronix TLA5000 Series Instructions d'utilisation et d'entretien

Tektronix

Tektronix A622 Manuel utilisateur

Tektronix

Tektronix TriMode P7700 Series Manuel utilisateur

Tektronix

Tektronix P6106A Manuel utilisateur

Tektronix

Tektronix TDSUSB2 Manuel utilisateur

Tektronix

Tektronix AWG70001B Manuel

Tektronix

Tektronix KEITHLEY 2450-EC Manuel utilisateur

Tektronix

Tektronix Keithley 6517B Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur