Tekmar TekmarNet 4 Manuel utilisateur

tekmarNet®4 Thermostat 540

Q540

08/10

Zoning

Replaces: New

Quick Setup Guide

Location1. Remove Mounting Base2.

Install Mounting Base3. Wiring4.

Switch Settings5.

12 34

tN4 Wiring Center

tN4 Zone Manager

Cooling Equipment

1 Stage

Cooling

1 Stage

Fan

G Y R

Fan

Cooling

tN4 C W

1234

tNt 540

540

One Stage Heat /

One Stage Cool / One Fan

Made in

Canada

Mmm YYYY

Lot # 12345

Meets Class B:

Canadian ICES

FCC Part 15

Power: 24 V ±10% 50/60 Hz 1.8 VA

56 VA fully loaded

Relays: 24 V (ac) 2 A

1001-01

tN4

Switch Settings:

For instructions see brochure

Use at least 75°C conductors

Setback

Scene

None

Lock

Unlock

Cool Master 1

Oﬀ

Switch

Position

Action

1ON SETBACK Allow thermostat to respond to

available schedule. Requires Timer 033.

OFF OFF No setback schedule response.

2ON SCENE Allow thermostat to respond to

scenes. Requires User Switch 479.

OFF OFF No scene response.

3ON NONE The thermostat is not part of a

cooling group.

OFF COOL MASTER 1 The thermostat is a

master of cooling group number 1.

4ON LOCK Locked to ‘User’ access level. Set

to Lock when installation completed.

OFF UNLOCK Unlock to access all settings.

Set to Unlock during installation.

Close Thermostat6.

pivot

tab

Thermostat

Base

Adaptor

Plate 007

Switch

Box

Thermostat

Base

Wall

Exterior

Wall

Interior

Wall

5 feet

1.5 m

Switch

Setting

Location

tekmar Control Systems Ltd. and tekmar Control Systems, Inc. 2 of 2 All specifications are subject to change without notice.

Printed in Canada. Q 540 - 08/10.

tekmar Control Systems Ltd., Canada, tekmar Control Systems, Inc., U.S.A.

Head Ofﬁce: 5100 Silver Star Road,

Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarcontrols.com

Mode button

Auto, Heat, Cool, Off

Fan button

Switch between Auto or On

User Interface7.

For a full list of settings and operational details, please refer to the thermostat Installation and Operation Manual

(D540) included with compatible tekmarNet®controls or download the brochure from www.tekmarcontrols.com

• Press and hold down both the and buttons for 2 seconds to change from one step to the next.

• Release both buttons once the step has been reached.

• Press the or the button to change the setting, if available.

• Press and hold down both the and buttons for 2 seconds to go to the next step, OR

• After 10 seconds of no button activity, the display goes back to normal operation.

Press

Together

The following settings are essential to the successful operation of the system.

Important

Note: Set switch setting #4 and tekmarNet

system control to Unlock to change Access level to Installer. Return to Lock

setting once installation has been completed.

Display Range Access Description Set to

°F or °C

Default = °F

Installer

User

TEMPERATURE UNITS

Press the or the button to change from °F to

°C and vice versa.

0, 1, 2, 3

Default = 1 Installer

FAN MODE

Select how the fan should operate together with heating

and cooling.

0 = Manual operation only

1 = Operate fan with cooling only

2 = Operate fan with heating and cooling

3 = Operate fan with heating only

Hyd

(Hydronic)

or Oth

(Other)

Default =

Hydronic

Installer

HEATING TERMINAL TYPE

Select if the heating for this zone is hydronic or non-

hydronic (other).

Available when:

A reset control is present on the tekmarNet®

system.

•

OFF, dLy

(delay), On

Default = On Installer

HEATING SUPPLY PUMP

Select how the system supply pump should operate:

On = system pump on during a call for heat.

Delay = system pump delayed 3 minutes for thermal

motor (wax actuator) zone valves to open.

Off = system pump not turned on during a call for heat.

Use when a manifold uses a Zone Group Pump.

Available when:

A reset control is present on the tekmarNet®system

AND Heating terminal type is set to Hydronic.

•

Critical Settings8.

Autres manuels pour tekmarNet 4

Ce manuel convient aux modèles suivants

Autres manuels Tekmar Thermostat

Tekmar

Tekmar tNt 540 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 Manuel utilisateur

Tekmar

Tekmar tekmarNet 2 House Control 403 Manuel utilisateur

Tekmar

Tekmar tekmarNet2 Thermostat 530 Manuel utilisateur

Tekmar

Tekmar tekmarNet 552 Manuel utilisateur

Tekmar

Tekmar D 054 Manuel utilisateur

Tekmar

Tekmar tekmarNet2 Thermostat 530 Manuel utilisateur

Tekmar

Tekmar 518 Manuel utilisateur

Tekmar

Tekmar 527 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 537 Manuel utilisateur

Tekmar

Tekmar 562 Manuel utilisateur

Tekmar

Tekmar 527 Manuel utilisateur

Tekmar

Tekmar 561 Manuel utilisateur

Tekmar

Tekmar tekmarNet 554 Manuel utilisateur

Tekmar

Tekmar tekmarNet 2 529 Manuel utilisateur

Tekmar

Tekmar tekmarNet 552 Manuel utilisateur

Tekmar

Tekmar 510 Manuel utilisateur

Tekmar

Tekmar 521 Manuel utilisateur

Tekmar

Tekmar 540 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 543 Manuel utilisateur

Tekmar

Tekmar D 508 Manuel utilisateur

Tekmar

Tekmar 521 Manuel utilisateur

Tekmar

Tekmar 537 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 538 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur