Tekmar 528 Manuel utilisateur

tekmarNet®2 Thermostat 528

Q 528

12/11

Zoning

Replaces: 08/10

Quick Setup Guide

12 34

tN2 Manager, Module

or Wiring Center

tN2 tN2 Slab Sensor 079, or

Outdoor Sensor 070, or

Indoor Sensor 076, 077, 084

1234

tNt 528

528

One Stage Heat

Mmm YYYY

Lot # 12345

Meets Class B:

Canadian ICES

FCC Part 15

1023-02

tN2

Switch Settings:

For instructions see brochure

Use at least 65°C conductors

Sensor

Setback

Scene

Lock

Not used Not used

Unlock

Oﬀ

No Power

Location1. Remove Mounting Base2.

Install Mounting Base3. Wiring4.

Switch Settings5.

Switch

Position

Action

1ON SETBACK Allow thermostat to respond to

available schedule. Requires Timer 033.

OFF OFF No setback schedule response.

2ON SCENE Allow thermostat to respond to

scenes. Requires User Switch 479.

OFF OFF No scene response.

ON LOCK Locked to ‘User’ access level. Set

to Lock when installation completed.

OFF UNLOCK Unlock to access all settings.

Set to Unlock during installation.

4ON Not used

OFF Not used

Close Thermostat6.

pivot

tab

Thermostat

Base

Adaptor

Plate 007

Switch

Box

Thermostat

Base

Wall

Exterior

Wall

Interior

Wall

5 feet

1.5 m

Switch Setting Location

tekmar Control Systems Ltd. and tekmar Control Systems, Inc. 2 of 2 All specifications are subject to change without notice.

Printed in Canada. Q528 - 12/11.

tekmar Control Systems Ltd., Canada, tekmar Control Systems, Inc., U.S.A.

Head Ofﬁce: 5100 Silver Star Road,

Vernon, B.C. Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarcontrols.com

User Interface7.

Critical Settings8.

For a full list of settings and operational details, please refer to the thermostat Installation and Operation Manual

(D528) included with compatible tekmarNet®controls or download the brochure from www.tekmarcontrols.com

Display Range Access Description Set to

°F or °C

Default = °F

Installer

User

TEMPERATURE UNITS

Press the or the button to change from °F to

°C and vice versa.

ADJUST

SUPPLY

OFF or On

Default = On Installer

HEAT SUPPLY PUMP

During heating, select whether or not the system supply

pump should turn on or be off to allow a zone group

pump per manifold.

Available when:

A reset control is present on the tekmarNet®system.•

ADJUST

SUPPLY

OFF or On

Default = OFF Installer

HEAT SUPPLY PUMP DELAY

During heating, select whether or not the system supply

pump should be delayed by 3 minutes before coming

on (for thermal motor or wax actuator).

Available when:

A reset control is present on the tekmarNet®system.•

On or Off

Default = On Installer

ROOM SENSOR

Select whether the built-in air temperature sensor is

on or off.

Available when:

A floor sensor or room sensor is installed on the

auxiliary sensor input.

Off, Room,

Outdoor,

Floor, Floor

dSP

Installer

AUXILIARY SENSOR

Select the type of auxiliary sensor.

Floor dSP = Show floor sensor reading in upper

number field.

Available when:

Auxiliary sensor automatically detected.

• Press and hold down both the and buttons for 2 seconds to change from one step to the next.

• Release both buttons once the step has been reached.

• Press the or the button to change the setting, if available.

• Press and hold down both the and buttons for 2 seconds to go to the next step, OR

• After 10 seconds of no button activity, the display goes back to normal operation.

Press

Together

The following settings are essential to the successful operation of the system.

Important

Note: Set switch setting #3 and tekmarNet®system control to Unlock to change Access level to Installer. Return to Lock

setting once installation has been completed.

Autres manuels pour 528

Autres manuels Tekmar Thermostat

Tekmar

Tekmar D538 Manuel utilisateur

Tekmar

Tekmar 519 Manuel utilisateur

Tekmar

Tekmar 518 Manuel utilisateur

Tekmar

Tekmar 509 Manuel utilisateur

Tekmar

Tekmar 530 Manuel utilisateur

Tekmar

Tekmar 528 Manuel utilisateur

Tekmar

Tekmar tekmarNet 532 Manuel utilisateur

Tekmar

Tekmar 545 tekmarNet 4 Manuel utilisateur

Tekmar

Tekmar 521 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 543 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 546 Manuel utilisateur

Tekmar

Tekmar 541 Manuel utilisateur

Tekmar

Tekmar 538 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 540 Manuel utilisateur

Tekmar

Tekmar 527 Manuel utilisateur

Tekmar

Tekmar D 508 Manuel utilisateur

Tekmar

Tekmar tekmarNet 2 House Control 403 Manuel utilisateur

Tekmar

Tekmar tekmarNet 2 528 Manuel utilisateur

Tekmar

Tekmar 510 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 544 Manuel utilisateur

Tekmar

Tekmar 541 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 538 Manuel utilisateur

Tekmar

Tekmar 521 Manuel utilisateur

Tekmar

Tekmar D 512 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur