Tekmar 562 Manuel utilisateur

D - 08/17

562

08/17

Zoning

Replaces: 12/16

WiFi Thermostat 562

Installation & Operation Manual

Features

• Mobile app for iOS and Android

• Supports optional floor sensor

• Automatic software updates

• Outdoor temperature

• Local weather

• Email error and warning notifications

• Time clock updated from Internet

• 7 day programmable schedule

• Away energy savings mode

• Early start

• Energy monitoring

• English/Français/Español languages

• 3.5" color touchscreen

• Selectable background colors

The WiFi Thermostat 562 provides precise temperature control of a heating and

cooling system. When connected to the Internet, the mobile app and website allow

you to control the thermostat remotely. The thermostat and mobile app include an

away feature that overrides the schedule to lower the temperature and increase

energy savings. The thermostat is designed to support radiant floor heating and

optional floor sensors can be installed to enhance comfort and protect floor coverings.

Introduction

2 of 24

D - 08/17

Table of Contents

Installation ..............................................................................................................4

Preparation ........................................................................................................4

Removing The Thermostat Base.......................................................................4

Mounting The Thermostat..................................................................................5

Relay Power Jumpers........................................................................................5

Application 562-1 ...............................................................................................6

Application 562-2 ...............................................................................................7

Application 562-3 ...............................................................................................8

Application 562-4 ...............................................................................................9

Sequence of Operation.........................................................................................10

Heating Operation............................................................................................10

Cooling Operation............................................................................................10

User Interface....................................................................................................... 11

Home Screen................................................................................................... 11

User Settings ........................................................................................................ 12

Away ................................................................................................................12

Schedule..........................................................................................................12

Display .............................................................................................................13

Time ................................................................................................................. 14

Fan...................................................................................................................14

WiFi..................................................................................................................15

Installer Settings ................................................................................................... 16

Setup................................................................................................................16

Setup - Toolbox................................................................................................16

Setup - Temp ...................................................................................................17

Setup - Sensors ...............................................................................................18

Setup - Alerts ...................................................................................................18

Setup - Relays .................................................................................................19

tekmar Connect Web and Mobile App.............................................................20

Troubleshooting ....................................................................................................22

Error Messages ...............................................................................................22

Technical Data .................................................................................................23

Limited Warranty and Product Return Procedure ...........................................24

D - 08/17

3 of 24

It is your responsibility to ensure that this thermostat is safely installed according to all

applicable codes and standards. tekmar is not responsible for damages resulting from

improper installation and/or maintenance.

Important Safety Information

This is a safety-alert symbol. The safety alert symbol is shown alone

or used with a signal word (DANGER, WARNING, or CAUTION), a

pictorial and/or a safety message to identify hazards.

When you see this symbol alone or with a signal word on your

equipment or in this Manual, be alert to the potential for death or

serious personal injury.

This pictorial alerts you to electricity, electrocution, and shock hazards.

This symbol identifies hazards which, if not avoided, could result in

death or serious injury.

This symbol identifies hazards which, if not avoided, could result in

minor or moderate injury.

This symbol identifies practices, actions, or failure to act which could

result in property damage or damage to the equipment.

Read Manual and all product labels BEFORE using the

equipment. Do not use unless you know the safe and proper

operation of this equipment. Keep this Manual available

for easy access by all users. Replacement Manuals are

available at tekmarControls.com

•

It is the installer's responsibility to ensure that this thermostat is safely installed ac-

cording to all applicable codes and standards.

•

Improper installation and operation of this thermostat could result in damage to the

equipment and possibly even personal injury or death.

•

This thermostat is not intended for use as a primary limit control. Other controls that

are intended and certified as safety limits must be placed into the control circuit.

Do not attempt to service the thermostat. There are no user serviceable parts inside

the thermostat. Attempting to do so voids warranty.

4 of 24

D - 08/17

Preparation

• tekmar or jeweler screwdriver

• Phillips head screwdriver

• Wire stripper

• Drill (for wall anchor)

• 3/16" drill bit (for wall anchor)

Tools Required

------------------------------------------------------

Materials Required

--------------------------------------------------

• 18 AWG LVT Solid Wire (Low Voltage Connections)

Installation

Installation Location

-------------------------------------------------

Consider the following:

• Interior Wall.

• Keep dry. Avoid potential leakage onto the control.

• Relative Humidity less than 90%. Non-condensing environment.

• No exposure to extreme temperatures beyond 32-122°F (0-50°C).

• No draft, direct sun, or other cause for inaccurate temperature readings.

• Away from equipment, appliances, or other sources of electrical interference.

• Easy access for wiring, viewing, and adjusting the display screen.

• Approximately 5 feet (1.5 m) off the finished floor.

• The maximum length of wire is 500 feet (150 m).

• Strip wire to 3/8" (10 mm) for all terminal connections.

• Use standard 8 conductor, 18 AWG wire.

Removing The Thermostat Base

While holding the base section in one hand, pull

the lower half of the display front towards you to

pivot it away from the base.

D - 08/17

5 of 24

Mounting The Thermostat

Relay Power Jumpers

To prevent the risk of personal injury and/or death, make sure power is

not applied to the thermostat until it is fully installed and ready for final

testing. All work must be done with power to the circuit being worked

on turned off.

Please be aware local codes may require this thermostat to be installed

or connected by an electrician.

Thermostat

Front

Thermostat

Base

Stud

Switch

Box

3 1/4"

(83 mm)

Wall

Stud

Thermostat

Front

Thermostat

Base

J1 J2 J3

RELAY

POWER

JUMPER

OFF

AWAY

J1 J2 J3

RELAY

POWER

JUMPER

OFF

SEN

COM

Rh1

Rh2

WiFi Thermostat 562

The thermostat includes three relay power

jumper connectors located below the wiring

hole.

• Set Jumper J1 to On to connect power R

to the Rh1 terminal.

•

Set Jumper J2 to On to connect power R

to the Rh2 wiring terminal.

•

Set Jumper J3 to On connects power R

to the Rc wiring terminal.

•

Set the jumper to off to disconnect the

power from Rh1, Rh2, or Rc respectively.

6 of 24

D - 08/17

Rh1

Rh2

AWAY

SEN

COM

Legend

C1 = Air Conditioner

F1 = Furnace

T1 = WiFi Thermostat 562

WiFi Thermostat 562

Application 562-1

Mechanical

----------------------------------------------------------

Electrical

-----------------------------------------------------------

The WiFi Thermostat 562 operates a one or two-stage furnace for heating and an air

conditioner for cooling.

Furnace

Terminals

J1 J2 J3

RELAY

POWER

JUMPER

OFF

Thermostat

jumpers:

J1 = On

J2 = On

J3 = On

D - 08/17

7 of 24

Application 562-2

Mechanical

----------------------------------------------------------

Electrical

-----------------------------------------------------------

AWAY

Rh1

Rh2

AWAY

SEN

COM

Legend

B1 = Boiler

BP = Boiler Pump

C1 = Air Conditioner

The WiFi Thermostat 562 operates a first stage radiant floor and a second stage furnace

for heating, and an air conditioner for cooling.

WiFi Thermostat 562

ZVC1

F1 = Furnace

PS = System Pump

T1 = WiFi Thermostat 562

V1 = Zone Valve

S1 = Optional Floor Sensor 079

S2 = Optional Indoor Sensor 084

ZVC1 = Zone Valve Control 304V, 306V

Furnace

Terminals

J1 J2 J3

RELAY

POWER

JUMPER

OFF

Thermostat

jumpers:

J1 = On

J2 = Off

J3 = Off

and install field jumper

wire from Rh2 to Rc

8 of 24

D - 08/17

Application 562-3

Mechanical

----------------------------------------------------------

Electrical

-----------------------------------------------------------

The WiFi Thermostat 562 operates a first stage radiant floor and a second stage fan

coil for heating, and an air conditioner for cooling.

AWAY

Rh1

Rh2

AWAY

SEN

COM

Vlv

Air

Handling

Unit

Terminals

WiFi Thermostat 562

ZVC1

Legend

B1 = Boiler

BP = Boiler Pump

C1 = Air Conditioner

F1 = Fan Coil

PS = System Pump

S1 = Optional Floor Sensor 079

S2 = Optional Indoor Sensor 084

T1 = WiFi Thermostat 562

V1 = Radiant Zone Valve

V2 = Fan Coil Zone Valve

ZVC1 = Zone Valve Control 304V, 306V

ZVC1

BP PS

J1 J2 J3

RELAY

POWER

JUMPER

OFF

Thermostat

jumpers:

J1 = On

J2 = Off

J3 = Off

and install field jumper

wire from Rh2 to Rc

D - 08/17

9 of 24

Application 562-4

Mechanical

----------------------------------------------------------

Electrical

-----------------------------------------------------------

The WiFi Thermostat 562 operates a first stage baseboard/radiator and a second stage

fan coil for heating, and an air conditioner for cooling.

AWAY

Rh1

Rh2

AWAY

SEN

COM

Vlv

Air

Handling

Unit

Terminals

WiFi Thermostat 562

ZVC1

Legend

B1 = Boiler

BP = Boiler Pump

C1 = Air Conditioner

F1 = Fan Coil

PS = System Pump

S1 = Optional Floor Sensor 079

S2 = Optional Indoor Sensor 084

T1 = WiFi Thermostat 562

V1 = Radiant Zone Valve

V2 = Fan Coil Zone Valve

ZVC1 = Zone Valve Control 304V, 306V

ZVC1

BP PS

J1 J2 J3

RELAY

POWER

JUMPER

OFF

Thermostat

jumpers:

J1 = On

J2 = Off

J3 = Off

and install field jumper

wire from Rh2 to Rc

10 of 24

D - 08/17

Heating Operation

Sequence of Operation

Cooling Operation

The Heat On symbol is shown on the display when the thermostat is heating. Heating

for freeze protection is provided whenever the air or floor temperature falls below 40

(4.5

C), regardless of operating mode.

Regular Heating

-----------------------------------------------------

W1 relay is on when the air temperature falls 1.5°F (1°C) below the Heat To setting.

When the temperature reaches the Heat To setting, the relay turns off. The W2 relay

turns on based on settings selected in the Setup menu. W2 turns off when the air

temperature is 0.5°F (0.25°C) below the Heat To setting.

Radiant Floor Heating

------------------------------------------------

When Radiant Floor Heating is selected in the setup menu, the W1 relay operates

using Pulse Width Modulation. This improves comfort for radiant systems with high

mass floors.

• 100% on time at Heat To setting -1.5

• 50% on time at Heat To setting

• 0% on time at Heat To setting + 1.5

Floor Sensor for Radiant Floor Heating

-------------------------------

If a floor sensor is connected, floor minimum and maximum settings are available.

For a combination of air and floor temperature control, leave the internal air sensor on

in the setup menu. A floor minimum can be used to prevent a fast drop in temperature

caused by receding solar exposure. This operation is recommended for areas heated

by afternoon sun through large windows. When the sun sets, it can take a long time

for the floors to get warm again. This may cause the room to cool off too much in the

early evening. A floor minimum setting can help with this condition by maintaining a

floor minimum temperature. Keep in mind the floor minimum temperature will override

the air temperature, and if set too high, may overheat the room.

A floor maximum is recommended for rooms with hardwood floors. Setting floor minimum

and maximum temperatures is a way of enhancing the comfort of the living space while

protecting floor coverings.

Warm Weather Shut Down (WWSD)

-----------------------------------

The heating system can automatically shut off based upon the outdoor temperature

and the WWSD setting. This provides a convenient way to shut off radiant floor heating.

The Cool On symbol is shown on the display when the thermostat is cooling.

• Cooling relay Y1 turns on at Cool To setting +

1.5°F (1°C)

• Cooling relay Y1 turns off at Cool To setting

Cold Weather Shut Down (CWSD)

------------------------------------

The cooling system can automatically shut off based upon the outdoor temperature

and CWSD setting. This prevents unwanted cooling during the winter.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tekmar Thermostat

Tekmar

Tekmar tekmarNet 557 Manuel utilisateur

Tekmar

Tekmar tekmarNet 553 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 544 Manuel utilisateur

Tekmar

Tekmar D538 Manuel utilisateur

Tekmar

Tekmar tekmarNet 554 Manuel utilisateur

Tekmar

Tekmar 545 tekmarNet 4 Manuel utilisateur

Tekmar

Tekmar tekmarNet 2 House Control 406 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 537 Manuel utilisateur

Tekmar

Tekmar tekmarNet 554 Manuel utilisateur

Tekmar

Tekmar 519 Manuel utilisateur

Tekmar

Tekmar tekmarNet 2 House Control 402 Manuel utilisateur

Tekmar

Tekmar 4 Series Manuel utilisateur

Tekmar

Tekmar 541 Manuel utilisateur

Tekmar

Tekmar 518 Manuel utilisateur

Tekmar

Tekmar tekmarNet 2 529 Manuel utilisateur

Tekmar

Tekmar Invita Manuel utilisateur

Tekmar

Tekmar tekmarNet2 Thermostat 530 Manuel utilisateur

Tekmar

Tekmar 542 Manuel utilisateur

Tekmar

Tekmar D 507 Manuel utilisateur

Tekmar

Tekmar 561 Manuel utilisateur

Tekmar

Tekmar 519 Manuel utilisateur

Tekmar

Tekmar tekmarNet 4 Manuel utilisateur

Tekmar

Tekmar 510 Manuel utilisateur

Tekmar

Tekmar 507 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur