Tecnosicurezza DigiTech Series Manuel utilisateur

DigiTech

Installation instructions

2 of 20 II_ DigiTech_01_eng

Installation instructions

DigiTech

Company

Founded in 1983 with the aim of providing a complete range of professional products,

Tecnosicurezza is now a consolidated reality in the field of locks and security systems for safes.

The experience gained in over 35 years of activity in the security sector has allowed the

designing and manufacturing of high technology and reliability systems, which continue to

receive the approval of an increasingly demanding clientele.

TECNOSICUREZZA is present directly on the Italian, Spanish and US markets and, through a

extensive distribution network, in many European and extra-European countries.

TECNOSICUREZZA is aimed at national and international customers of primary importance, such

as banks, safe manufacturers, cash in transit companies, mass market retailers and post offices.

Today TECNOSICUREZZA is a leading company focused on the customers’needs and

constantly in step with technology.

II_DigiTech_01_eng 3 of 20

Installation instructions

DigiTech

Table of contents

COMPANY 2

TABLE OF CONTENTS 3

MODELS AND CHARACTERISTICS 4

ACCESSORIES 4

AUDIT AND PROGRAMMING ACCESSORIES 4

CERTIFICAZIONS 5

IMPORTANT NOTES! 6

KEYPAD DIMENSIONS 7

ROTOBOLT LOCK DIMENSIONS 8

STRAIGHTBOLT LOCK DIMENSIONS 8

SPRINGBOLT LOCK DIMENSIONS 9

MOTORLOCK DIMENSIONS 9

MOTORSPRINGBOLT LOCK DIMENSIONS 9

FIXED KEYPAD INSTALLATION INSTRUCTIONS 10

ROTOBOLT LOCK INSTALLATION INSTRUCTIONS 10

STRAIGHTBOLT AND SPRINGBOLT LOCKS INSTALLATION INSTRUCTIONS 11

MOTORLOCK AND MOTOR SPRINGBOLT LOCKS INSTALLATION INSTRUCTIONS 12

FUNCTIONAL TEST 14

CE DECLARATIONS 15

NOTES 17

CONTACTS 20

4 of 20 II_ DigiTech_01_eng

Installation instructions

DigiTech

Models and characteristics

Model

Variant

T9510/BR –Keypad in metal. Black colour

with rubber membrane foil keypad in black

colour.

/DL with Dallas key reader.

Accessories

Code

Description

N077/A

Battery box with alarm interface.

L4001

Large battery box for 6 size C 1.5V batteries.

T6005/W

Power supply interface (12Vdc).

T6005

Power supply interface (12Vdc) with alarm

interface.

L2666

Knob with 6 mm square spindle.

N1982

User Dallas key.

Audit and programming accessories

Code

Description

N42180/T

Interfaccia USB.

N42170/D

Dallas key reader with molex connector.

N42170/J

Dallas key reader with jack connector.

N42170/M

Magnetic Dallas key connection cable.

N1996RM

Magnetic Dallas key for audit.

T42146/J

Setup and audit cable.

II_DigiTech_01_eng 5 of 20

Installation instructions

DigiTech

Certificazions

6 of 20 II_ DigiTech_01_eng

Installation instructions

DigiTech

Important notes!

Before installing this product, please read carefully the installation and operating

instructions.

Locks can be installed in all traditional safes.

Lock has to be mounted on secure storage metal (preferred steel) units only.

Locks must be protected against external attacks, for this reason it is recommended to

install them on the door away from any through holes.

Any electronic part must be properly protected and not easily accessible even when

the door is open.

Locks have been developed to work correctly in a temperature range from -5 ° C to + 50

° C and in an environment with non-condensing humidity between 25% and 90%.

The mounting dimensions are standard (magic module).

For the installation of the keypad and lock, use only the screws provided by

Tecnosicurezza. Any other screw must be approved in advance.

Locks are supplied with metric (M6) mounting screws. Upon request, Imperial 1/4-20 UNC

format mounting screws are available.

The type of material and the length of the screws must, in any case, be selected so as to

guarantee long life and reliability.

Tighten the screws so that the lock is firmly fixed to the mounting surface

(recommended torque between 2.5 and 5.5 Nm).

The mounting surface must be perfectly flat.

In order to prevent loosening of the screws it is recommended the use of LOCTITE®

threadlocker and/or specific washers positioned under the head of the fixing screw.

The diameter of the passage hole for the connection cable or the spindle must not

exceed 11 mm.

The hole must be completely cleaned of drill dust and no edge should be sharp.

II_DigiTech_01_eng 7 of 20

Installation instructions

DigiTech

Lock must not be lubricated.

In the locked position, the distance between the bolt and the boltwork part that is

moving the lock bolt must comply with the following specifications for each type of lock.

Any component to be fixed to the lock bolt must be previously approved by Tecnosicurezza

before installation. In any case, the maximum load must not exceed 2.5 N.

Secure the cables away from moving parts by using cable ties and cable ties bases.

If placed in normal domestic or office environments, the locks do not require particular

maintenance; in any case, after 10,000 opening/closing cycles, it is recommended to run

a test that verifies the correct and complete operation of the product.

Use only DURACELL™ 9 Volt Alkaline batteries, or battery holders with DURACELL™ 1.5

Volt Alkaline batteries. Alternatively, it is also possible to use a stabilized 12V - 1A power

supply (p.n. N1212) with relative power supply interface (p.n. T6005/W or p.n. T6005).

A series of acoustic signals during opening indicate a low battery level. In this case, the

battery must be replaced.

Keypad dimensions

8 of 20 II_ DigiTech_01_eng

Installation instructions

DigiTech

STANDARD mounting

VERTICAL mounting

RotoBolt lock dimensions

StraightBolt lock dimensions

II_DigiTech_01_eng 9 of 20

Installation instructions

DigiTech

SpringBolt lock dimensions

MotorLock dimensions

MotorSpringBolt lock dimensions

10 of 20 II_ DigiTech_01_eng

Installation instructions

DigiTech

Fixed keypad installation instructions

Insert the keypad cable inside the hole on the safe door and connect it to the lock connector

"ENT" (connector 1 in the case of a MotorLock or Motor SpringBolt lock). Lift the keypad

membrane and, making sure that the connection cable and the battery cable are not damaged

by the keypad case, fix the screws to the relative threaded holes on the safe door.

STANDARD mounting

VERTICAL mounting

The keypad can also be installed in a quick hooking/unhooking mode (vertical mounting).

Remove the release liner placed under the membrane

and apply the latter on the keypad case.

Connect a battery to the battery connector inside the

keypad battery compartment or, if provided, connect the

battery pack to the lock connector "BAT" (connector 2 in

the case of a MotorLock or Motor SpringBolt lock).

RotoBolt lock installation instructions

The RotoBolt lock is a swingbolt lock whose block is carried out by a motor; it can be installed in

all 4 directions, even upside down.

By entering a valid code, the lock electronic removes the blocking for 3 seconds and the

boltwork can be moved into open position by pushing the bolt inside the lock case.

The bolt automatically secures when the safe handle, or the safe door mechanism, is brought

to the locked position.

If the RotoBolt lock is used in conjunction with other locks, the safe door mechanism must

ensure the closure of the RotoBolt before the other locks.

The lock can be mounted in all four mounting directions (RH, LH, VU, VD).

Furthermore, by flipping over the lock, both locking directions can be realized (RH/LH).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Tecnosicurezza Verrouillage

Tecnosicurezza

Tecnosicurezza Pulse Pro Manuel utilisateur

Tecnosicurezza

Tecnosicurezza Pulse Pro T6630/GRP Manuel utilisateur

Tecnosicurezza

Tecnosicurezza DigiTech Manuel utilisateur

Tecnosicurezza

Tecnosicurezza TechMaster Manuel utilisateur

Tecnosicurezza

Tecnosicurezza TechMaster Manuel utilisateur

Tecnosicurezza

Tecnosicurezza DigiTech Manuel utilisateur

Tecnosicurezza

Tecnosicurezza Pulse Pro Manuel utilisateur

Tecnosicurezza

Tecnosicurezza Pulse Pro Manuel utilisateur

Tecnosicurezza

Tecnosicurezza TechMaster T9530/GR Manuel utilisateur

Tecnosicurezza

Tecnosicurezza MiniTech Manuel utilisateur

Tecnosicurezza

Tecnosicurezza Pulse 2 Manuel utilisateur

Tecnosicurezza

Tecnosicurezza MiniRotoboIt UR4020 Guide de l'utilisateur

Tecnosicurezza

Tecnosicurezza Pulse Manuel utilisateur

Tecnosicurezza

Tecnosicurezza MiniTech Manuel utilisateur

Tecnosicurezza

Tecnosicurezza AuditLine T6530/DL Manuel utilisateur

Tecnosicurezza

Tecnosicurezza MiniTech Manuel utilisateur

Tecnosicurezza

Tecnosicurezza MiniTech Instructions de fonctionnement

Tecnosicurezza

Tecnosicurezza T6530/DL Manuel utilisateur

Tecnosicurezza

Tecnosicurezza TechMaster Manuel utilisateur

Tecnosicurezza

Tecnosicurezza TechMaster Manuel utilisateur

Tecnosicurezza

Tecnosicurezza KL3909 Instructions d'installation

Tecnosicurezza

Tecnosicurezza MiniTech T52 Series Manuel utilisateur

Tecnosicurezza

Tecnosicurezza MiniTech TSMINI-4 Manuel

Tecnosicurezza

Tecnosicurezza StraightBolt EM3520 Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur