TEATRO TS-1 Manuel du propriétaire
Teatro
Teatro
Teatro
TS-1 Touchscreen
Installation and Operation
10/2006
designed by
© 2006 R.O.S. Software / Germany
TS-1 Touchscreen Manual
2
Programming & Distribution:
R.O.S. Software
www.ros-software.de
email: [email protected]
Windows XP/2000/95/98/ME are registered trademarks of Microsoft Corporation
SOFTWARE LIMITED WARRANTY
To the original customer purchasing this product in the first instance only,
R.O.S. provides the following warranties:
30 Day Satisfaction Guarantee. If you are dissatisfied with the Software for any
reason we will refund your money for a period of 30 days from the date of original
purchase.
R.O.S. warrants that the Software will perform in substantial compliance with the
documentation supplied with the Software. If a material defect in the Software
is found, you may return the Software to us for a refund. In no event will such a
refund exceed the purchase price of the Software. This is your sole and exclusive
remedy for any breach of warranty during this 30 day period.
R.O.S. does not warrant that the Software will meet your requirements, that
operation of the Software will be uninterrupted or error-free, or that all Software
errors will be corrected. R.O.S. is not responsible for problems caused by changes in
the operating characteristics of computer hardware or computer operating systems
which are made after the release of the Software nor for problems in the interaction
of the Software with other software. R.O.S. will have no responsibility to replace or
refund the license fee of media damaged by accident, abuse or misapplication.
TS-1 Touchscreen Manual
3
Contents
Introduction ...................................................................................................................5
Installing the Touchscreen (RS232 version) .....................................................................6
Connections (RS232 version) ..........................................................................................6
Configuration with a single monitor only (RS232 version) ...............................................7
Configuration with two monitors (RS232 version) ............................................................7
Installing the Touchscreen (USB version) .........................................................................8
Connections (USB version) ..............................................................................................8
Configuration with a single monitor only (USB version) ...................................................9
Configuration with two monitors (USB version) ...............................................................9
Graphics card setup ........................................................................................................10
Installalling the touchscreen driver .................................................................................12
Additional touchscreen driver settings .............................................................................14
Touchscreen display settings (12.1“ Touchscreen) ............................................................16
Touchscreen display settings (15“ Touchscreen) ...............................................................17
Touchscreen options within Teatro ...................................................................................18
Additional information ...................................................................................................20
TS-1 Touchscreen Manual
4
Touchscreen TS-1 with Teatro‘s main screen
Touchscreen TS-1 with special „buttons only“ screen
TS-1 Touchscreen Manual
5
Introduction
The TS-1 Touchscreen can be used to control the Teatro software in places where the usual PC, monitor, mouse and keyboard
setup is not possible or not desired. The touchscreen offers control about the audio playback process similar to a remote control
for tapemachines or CD/Cart Players.
The usage of the Teatro software together with the touchscreen, offers the best combination in modern and flexible audio
playback for Live, Theater, TV:
• The PC software can be extended with additional program modules. Therefore this system has big advantages compared to
a „stand alone“ system with a fixed operating system which in most cases can not be upgraded with additional features.
• The touchscreen makes it possible to control the PC and it‘s software as if it would be a „stand alone“ system, while there is
no need to additionally use the PC mouse and keyboard.
The following pages will describe the installation and the operation of the touchscreen. If you have worked with Teatro pre-
viously you will notice that many of the functions on the touchscreen are identical to functions within the Teatro software.
The touchscreen hardware comes in two different versions. One is the RS232 version and the second one is the USB version.
Both version follow a different cabling strategy, so please make sure you read the section that describes your type of
touchscreen hardware!
If you have ideas for additional functions of the software of the touchscreen just let us know: [email protected]
Caution!
The installation of the touchscreen is not very
complicated, but it is highly recommended that
you read this manual before you start with the
installation. This will help you to prevent problems
with the cabeling and the driver setup!
TS-1 Touchscreen Manual
6
Installing the Touchscreen (RS232 version)
There are two basic ways to use the touchscreen together with Teatro:
Configuration with a single monitor only
Teatro uses only the touchscreen as the main monitor. In this setup it is only possible to display the normal Teatro main screen
OR the special touchscreen operation display. It is possible to switch between these two displays with the R8 hardware button
located on the touchscreen or the „Touchscreen“ button located within Teatro‘s mainscreen.
Configuration with two monitors
Teatro displays its mainscreen on the usual PC monitor and at the same time shows the special touchscreen operation screen on
the touchscreen TFT display. This is only possible if the PC is equipped with a special double-head graphics card (for example
the Matrox G450/550). If this is the case, the usual PC monitor must be connected to output 1 and the touchscreen must be
connected to output 2 of the double-head graphics card.
Both configurations will be discussed further on the following pages.
Connections (RS232 version)
On the bottom of the touchscreen hardware you will find the following connectors:
1. Power Supply
2. VGA
3. RS-232
4. to PC‘s keyboard connector
(black cable that also has a Y-branch with
a green and a purple connector !!!)
5. from PC Keyboard
6. unused
7. unused
The bottom of the touchscreen has a
couple of holes, channels and covers
to mount all cables and lead them to
the external equipment in a proper
fashion!
TS-1 Touchscreen Manual
7
Configuration with a single monitor only (RS232 version)
When using Teatro with the touchscreen only, the following connections have to be made.
The PC‘s keyboard connector
(purple) must be connected
with the touchscreens
socket 4. (A special cable
with a Y-branch is supplied
together with the touchscreen
hardware)
The usual PC keyboard
must be connected to the
touchscreens socket 5.
The PC‘s COM1
(RS232) port must
be connected to the
touchscreens socket 3.
(A special RS232 cable
is supplied with the
touchscreen hardware)
PC mouse
(green) must be
connected as
usual.
The PC‘s VGA
connector must be
connected with the
touchscreens socket 2.
(A VGA cable is supplied
with the touchscreen
hardware)
Configuration with two monitors (RS232 version)
When using Teatro with the usual PC monitor plus the touchscreens TFT display, the following connections have to be made.
1
2
PC mouse
(green) must be
connected as
usual.
Connector 1 of the double-
head graphics card must be
connected to the usual PC
monitor.
Connector 2 of the double-head
graphics card must be connected to
the touchscreens socket 2.
CAUTION!
On some graphic cards output 1 is located at the
bottom and output 2 is located at the top of the
graphic cards backplane! Always make sure the
normal PC monitor is connected to output 1 and
the touchscreen is connected to output 2!
The PC‘s keyboard
connector (purple) must
be connected with the
touchscreens socket 4.
(A special cable with a Y-
branch is supplied together
with the touchscreen
hardware)
The usual PC keyboard
must be connected to the
touchscreens socket 5.
The PC‘s COM1
(RS232) port must
be connected to the
touchscreens socket
3. (A special RS232
cable is supplied
with the touchscreen
hardware)
TS-1 Touchscreen Manual
8
Installing the Touchscreen (USB version)
There are two basic ways to use the touchscreen together with Teatro:
Configuration with a single monitor only
Teatro uses only the touchscreen as the main monitor. In this setup it is only possible to display the normal Teatro main screen
OR the special touchscreen operation display. It is possible to switch between these two displays with the „Close“ button located
on the touchscreen or the „Touchscreen“ button located within Teatro‘s mainscreen.
Configuration with two monitors
Teatro displays its mainscreen on the usual PC monitor and at the same time shows the special touchscreen operation screen on
the touchscreen TFT display. This is only possible if the PC is equipped with a special double-head graphics card (for example
the Matrox G450/550). If this is the case, the usual PC monitor must be connected to output 1 and the touchscreen must be
connected to output 2 of the double-head graphics card.
Both configurations will be discussed further on the following pages.
Connections (USB version)
On the bottom of the touchscreen hardware you will find the following connectors:
The bottom of the touchscreen has a
couple of holes, channels and covers
to mount all cables and lead them to
the external equipment in a proper
fashion!
1. Power Supply
2. to PC VGA connector
3. to PC USB connector
4. for additional USB Devices
5. not used
6. not used
TS-1 Touchscreen Manual
9
Configuration with a single monitor only (USB version)
When using Teatro with the touchscreen only, the following connections have to be made.
The PC‘s keyboard
(purple) must be
connected as usual
The PC‘s USB port
must be connected
to the touchscreens
socket 3. (A USB cable
is supplied with the
touchscreen hardware)
PC mouse
(green) must be
connected as
usual.
The PC‘s VGA
connector must be
connected with the
touchscreens socket 2.
(A VGA cable is supplied
with the touchscreen
hardware)
Configuration with two monitors (USB version)
When using Teatro with the usual PC monitor plus the touchscreens TFT display, the following connections have to be made.
1
2
PC mouse
(green) must be
connected as
usual.
Connector 1 of the double-
head graphics card must be
connected to the usual PC
monitor.
Connector 2 of the double-head
graphics card must be connected to
the touchscreens socket 2.
CAUTION!
On some graphic cards output 1 is located at the
bottom and output 2 is located at the top of the
graphic cards backplane! Always make sure the
normal PC monitor is connected to output 1 and
the touchscreen is connected to output 2!
The PC‘s keyboard
(purple) must be
connected as usual
The PC‘s USB port
must be connected
to the touchscreens
socket 3. (A USB cable
is supplied with the
touchscreen hardware)
TS-1 Touchscreen Manual
10
Graphics card setup
When using a double-head graphics card, some additional settings must be made within WindowsXP, to make sure both moni-
tors will receive the proper information.
If a Matrox G450/G550 was installed in the PC, WindowsXP will automatically detect this type of card and will install its own set
if graphic drivers. It is also possible to install the original Matrox drivers which came on a CD together with the graphics card.
After installing the drivers, the following settings must be made within WindowsXP:
• Open the „System“ dialog and double-click the „Display“ Icon.
• Select the „Settings“ tab with the two monitor symbols:
• Select monitor 1 and set the recommended resolution to 1024x768 (or higher).
• Select „Advanced“ and „Monitor“ and select the recommended frequency for your monitor.
• Apply the frequency selection with „OK“.
Table des matières
Manuels écran tactile populaires d'autres marques
Elecro Engineering
Elecro Engineering Poolsmart Plus Instructions d'installation
Johnson Controls
Johnson Controls IQ4 HUB Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET2270L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET1002L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems 3201L Manuel utilisateur
Duratec
Duratec S15 Manuel utilisateur
