Swegon CONDUCTOR Manuel utilisateur

User manual

CONDUCTOR

LEVEL 1

CONDUCTOR

Swegon reserves the right to alter speciﬁcations 20090310 www.swegon.com

CONDUCTOR

Swegon reserves the right to alter speciﬁcations 20090310 www.swegon.com

User manual

About CONDUCTOR

CONDUCTOR is a control system for regulating the room

temperature. You can create a comfortable indoor cli-

mate by keying heating and cooling settings in the room

unit. When you leave the room, the system automatically

regulates the climate until you enter a new temperature

setting.

Set to its automatic mode, the CONDUCTOR will regulate

heating and cooling in response to circumstances in the

room: is anyone in the room, is a window open, is the

room air humid?

These instructions describe how you as day-to-day user

of the CONDUCTOR, ofﬁce worker or hotel guest, can

regulate the heat and coolness in the room using the

room unit.

The parts of the room unit







Figure 1. The room unit.

1Display

Shows the current status of the climate system and

information about the room temperature. It also shows

the settings you enter with the key set.

2Keyset

You can use it for changing settings of room tempera-

ture.

3 Temperature sensor

Placed inside the enclosure.

N.B.! In that the measurement of the temperature is in-

ﬂuenced by the surroundings, the measurement of the

room temperature, dependent on where the room unit

is located, is not necessarily representative of the actual

heating or cooling requirements of the room.

To use the CONDUCTOR

The following section describes how you use the room

unit to adjust room temperature.

The key set

You use the key set to increase and decrease the desired

room temperature.

Figure 2. The key set.

1 The keys for adjusting the temperature

▲UP Increase the temperature.

▼DOWN Decrease the temperature.

2Accept key for temperature

OK CONFIRM Conﬁrm the setting.

CONDUCTOR

Swegon reserves the right to alter speciﬁcations 20090310 www.swegon.com

The Main image

The main image shows the current status and tempera-

ture setting of the climate system.

Figure 3. The Main image.

1 Current temperature

The ﬁeld shows present temperature setting. Speciﬁed

in ˚C.

2 Heating/cooling

The ﬁeld shows whether the climate system is set to

heating or cooling.

Heating

Cooling

3 Battery level/window status

The ﬁeld shows the battery level. If a window is open

in the room this will be visible on the screen.

Good battery status.

Medium good battery status

Change battery! See Service and sup-

port.

Open window.

4Operatingmode

The ﬁeld shows current operating mode of the climate

system.

N.B.! The ﬁeld is empty in manual mode.

AUTO Automatic

ECON Economy

STOP Stop

EMERG Emergency

5 Presence status

Someone is in the room.

CONDUCTOR

Swegon reserves the right to alter speciﬁcations 20090310 www.swegon.com

User manual

To set the desired room temperature

You set the desired room temperature in the main menu,

by pressing any of the following keys: ▲UP or ▼DOWN.

The ﬁrst press of the key ( ▲UP or ▼DOWN) will take

you to the temperature setting image, without affecting

the temperature setting. You can now set your desired

room temperature.

Figure 4. The temperature setting image.

As in the main menu the desired room temperature is

displayed in ˚C in the middle of the display.

To increase the temperature.

Press ▲UP until the desired room temperature can be

read in the display.

Then press OK CONFIRM to conﬁrm your setting. You

then return to the main menu.

To decrease the temperature

Press ▼DOWN until desired room temperature can be

read in the display.

Then press OK CONFIRM to conﬁrm your setting and

return to the main menu.

Service and support

If the room unit does not operate in a satisfactory

manner, please contact the person(s) responsible for

maintaining the premises (caretaker or receptionist).

CONDUCTOR

Swegon reserves the right to alter speciﬁcations 20090310 www.swegon.com

CONDUCTOR

Swegon reserves the right to alter speciﬁcations 20090310 www.swegon.com

User manual

Increase and decrease the room temperature

1 2 3 4

QUICK GUIDE

Press the▲or ▼

key.

Press the ▲key to

increase the tem-

perature.

Press the ▲key to

decrease the tem-

perature.

Press one time for

each degree if you

wish to change the

temperature.

Press theOKkey to

conﬁrm your set-

ting.

You have ﬁnished

setting the room

temperature.

Table des matières

Autres manuels Swegon Unité de contrôle

Swegon

Swegon TBLZ-1-66 Manuel utilisateur

Swegon

Swegon TBLZ-3-50 Manuel de la liste des pièces

Swegon

Swegon CASA series Manuel

Swegon

Swegon Parasol ma Manuel utilisateur

Swegon

Swegon Parasol evo II ma Manuel utilisateur

Swegon

Swegon SuperWISE II Manuel utilisateur

Swegon

Swegon TBIQ-3-1 Manuel d'instructions et de sécurité

Swegon

Swegon SuperWISE II a Manuel utilisateur

Swegon

Swegon TBIQ-2-1-aa IQnomic Plus GOLD Manuel utilisateur

Swegon

Swegon TBLZ-2-48-2 Manuel utilisateur

Swegon

Swegon CCO kit Manuel utilisateur

Swegon

Swegon CRTc Mode d’emploi

Swegon

Swegon TBLZ-1-48-1 Manuel utilisateur

Swegon

Swegon WISE Parasol Z b Series Manuel utilisateur

Swegon

Swegon IQlogic+ TBIQ-3-2-aa GOLD Manuel utilisateur

Swegon

Swegon TBLZ-1-48-2 GOLD Manuel utilisateur

Swegon

Swegon P.LEMMENS CB4 TAC4 REC Manuel utilisateur

Swegon

Swegon CRM Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur