Swann DVR-1580 Manuel utilisateur

Security Made Smarter

PRO-SERIES HD

Professional HD

Security System

Instruction Manual

Important Information

FCC Verification

This equipment has been tested and found to comply with the limits for

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interference to radio

or television reception, which can be determined by turning the equip-

ment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is sub-

ject to the following two conditions:

• These devices may not cause harmful interference

• These devices must accept any interference received, including in-

terference that may cause undesired operation

Important Notice: All jurisdictions have specific laws and regulations re-

lating to the use of cameras. Before using any camera for any purpose,

it is the buyer’s responsibility to be aware of all applicable laws and reg-

ulations that prohibit or limit the use of cameras and to comply with the

applicable laws and regulations.

FCC Regulation (for USA): Prohibition against eavesdropping

Except for the operations of law enforcement officers conducted under

lawful authority, no person shall use, either directly or indirectly, a de-

vice operated pursuant to the provisions of this Part for the purpose

of overhearing or recording the private conversations of others unless

such use is authorized by all of the parties engaging in the conversation.

Warning: Changes or modifications made to this device not approved

expressly by the party responsible for compliance could void the user’s

authority to operate the equipment.

Important Safety Instructions

• Make sure product is fixed correctly and stable if fastened in place

• Do not operate if wires and terminals are exposed

• Do not cover vents on the side of the device and allow adequate space

for ventilation

• Only use the power adapter supplied with your DVR

Password Information

This DVR does not have a default password. A password is created dur-

ing the Setup Wizard. If password protection has been enabled and you

have forgotten your password, you can enter a super password. Click

“Forgot Password” then input your DVR’s MAC address without the co-

lons, for example, EC71DBE32877.

Your DVR’s Mac address can be obtained using SwannView Link for Win-

dows. Please download it from our website: support.swann.com.

About this Manual

This instruction manual is written for the DVR-1580, 4550, 4750 and

5000 models and was accurate at the time it was published. However,

because of our on-going efforts to constantly improve our products, ad-

ditional features and functions may have been added since that time. We

encourage you to visit our website to check for the latest updates and

product announcements.

Contents

Important Information 2

Contents 3

Contents (cont.) 4

Live View 5

Menu 6

Menu Layout 7

Camera Configuration 8

Display: Camera 9

Creating a Privacy Mask 10

Recording: Encode (720p Models) 11

Recording: Encode (1080p Models) 12

Recording: Encode (3MP Models) 13

Alarm: Motion 14

Motion Detection 15

Motion Detection Schedule 16

Motion Detection Tips 17

Alarm: Video Loss 18

Video Loss Schedule 19

Device: PTZ 20

Controlling a PTZ Camera 21

Creating a Preset 22

Creating a Patrol 23

Recording Configuration 24

Recording: Encode 25

Recording: Option 26

Recording: Schedule 27

Playback & Backup 28

Search: Playback 29

The Playback Interface 30

The Playback Interface (cont.) 31

Search: Event 32

Search: Backup 33

System Configuration 34

System: General 35

System: User 36

System: Maintenance 37

Alarm: Exception 38

Device: HDD 39

Display: Output 40

Network: General 41

Network: Advanced 42

System Status 43

Search: Log Search 44

Network: Status 45

Device: S.M.A.R.T 46

System: System Information 47

Glossary 48

Glossary (cont.) 49

Glossary (cont.) 50

Warranty Information 51

Helpdesk & Technical Support 52

Contents (cont.)

Live View

Live View is the default display mode for your DVR. Each camera connected will be displayed on-screen. You can check the status or operation of

your DVR and cameras using the icons and Menu Bar on the Live View screen. Right-click the mouse to access the Menu Bar.

1. Opens the Menu.

2. Click to view a single camera.

3. Click to view four cameras.

4. Click to view eight cameras.

5. Click to view nine cameras.

6. Click to view the next screen in

single or four camera view.

7. Click to enable PIP mode.

8. Click to manually record the

selected camera.

9. Click to access the Setup Wiz-

ard.

Double-click a

live video chan-

nel to view full

screen.

Menu Bar

Status Icons

Camera Toolbar

Click & drag a

live video chan-

nel to reposition

it.

1 2 3 4 5 6 7 8 9

Camera1 Camera2

29/09/2015 10:30:15 Tue

The Menu is where you control the

various actions and options that are

available on your DVR. You can also

access previously recorded video

for playback and to export to a USB

storage device such as a flash drive.

To maintain system integrity, a firm-

ware upgrade can be performed when

available and access to the shutdown

menu to restart or safely turn off your

DVR.

Menu Layout

The various actions and options

that are available, are categorised

on the left-hand side of the Menu.

Clicking each category will reveal a

number of tabs or sub-categories

that can be changed from their de-

fault value.

Some options may have additional

menus that can be accessed.

To exit or access the

previous menu, right-

click the mouse.

To shutdown, reboot or lock

your DVR, click the “Shut-

down” button. To ensure the

integrity of your data and re-

cordings, always select “Shut-

down” when powering off.

Camera Configuration

The majority of the camera configura-

tion options available are in the “Dis-

play”, “Recording”, “Alarm” and “De-

vice” menus that are accessible from

the Menu. You can change the reso-

lution and bitrate settings as well as

the image settings for brightness and

contrast. Your DVR has several con-

trols for Motion Detection, Video Loss

and the ability to create one or more

privacy masks.

Display: Camera

Camera No.: Select a camera that you would like to configure.

Camera Mode: Choose the type of camera from AUTO, TVI and AHD.

Camera Name: Select a name for the camera you’ve selected. It can be

up to 16 characters in length.

Display Camera Name: Leave this enabled if you would like to display

the camera name on the Live View screen, otherwise click to disable.

Record Date: It’s recommended to leave this enabled as it creates an

inseparable record of exactly when the footage was captured.

OSD Display Position: Click the “Set” button to change the position of

the camera name on the Live View screen. Use the mouse to reposition

the camera name. Right-click the mouse then click “Save” to exit.

Image Settings: This gives you access to the image adjustment tools.

Click the “Set” button to change then click “OK” when finished.

Brightness: This changes how light the image appears to be.

Contrast: This increases the difference between the blackest black and

the whitest white in the image.

Saturation: This alters how much colour is displayed in the image. The

higher the saturation, the more bright and vivid colours will appear.

Hue: This changes the colour mix of the image.

Mask: Click the checkbox to enable then click “Area Settings” to create

one or more privacy masks - click here for more information.

• Use the “Copy to” button to apply all settings to the other cameras.

• Don’t forget to click “Apply” to save settings.

• Right-click the mouse to exit the Menu.

The configuration options

available allow you to name

each camera relevant to

where it has been installed

as well as the ability to ad-

just image settings such

as brightness and contrast.

The Camera Mode option

sets the type of camera be-

tween AHD and TVI, AUTO

will set the DVR to match

the supported camera sig-

nal and is recommended.

Creating a Privacy Mask

1. Using the mouse, click & drag to select the area that you want to

create a privacy mask for (as shown above). Up to four masks can be

created.

2. To delete a mask, move the mouse pointer within the mask, right-

click the mouse to access the sub-menu (as shown above) then click

“Delete Area”. Click “Delete All” to delete all masks. Click “Save” to

save your mask or click “Cancel” to exit.

• Click the “Default” button to revert back to default settings.

• Use the “Copy to” button to apply all settings to the other cameras.

• Don’t forget to click “Apply” to save settings.

• Right-click the mouse to exit the Menu.

A privacy mask can be

used if you want to ob-

scure part of your im-

age for privacy. You can

also use this option to

minimize false trig-

gers for Motion Detec-

tion. You can create up

to four areas per cam-

era to mask. Any area

obscured by a privacy

mask won’t be shown

live or recorded.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Swann Système de sécurité

Swann

Swann Advanced SWDVK-825508TB Manuel utilisateur

Swann

Swann SW212-HXD Manuel utilisateur

Swann

Swann USB 2.0 DVR Guardian Manuel utilisateur

Swann

Swann PRO-580 Manuel utilisateur

Swann

Swann Advanced Quad Processor Manuel utilisateur

Swann

Swann SW276-ASL Manuel utilisateur

Swann

Swann MALARM1301012E Manuel utilisateur

Swann

Swann RedAlert SW244-WDW Manuel utilisateur

Swann

Swann Advanced SWDVK-825508C Manuel utilisateur

Swann

Swann DVR4-1000 Manuel utilisateur

Swann

Swann One Manuel utilisateur

Swann

Swann PLATINUM HD Manuel utilisateur

Swann

Swann RL-0507A Manuel utilisateur

Swann

Swann Automobile Alarm Guide de démarrage rapide

Swann

Swann SW347-WAK Manuel utilisateur

Swann

Swann Alpha D03C5 Manuel utilisateur

Swann

Swann DVR4-Pro-Net TBA Guide de démarrage rapide

Swann

Swann DIY Security Kit Manuel utilisateur

Swann

Swann SWDVK-840004D Manuel utilisateur

Swann

Swann SW351-WSA Manuel utilisateur

Swann

Swann PRO-580 Manuel utilisateur

Swann

Swann SW344-DPS Manuel utilisateur

Swann

Swann GuardianEye Manuel utilisateur

Swann

Swann RedAlert Single Channel Digital Security... Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur

DSC

DSC PC 4010 Manuel du propriétaire