Swann RedAlert Single Channel Digital Security... Manuel utilisateur
RedAlert™
If this device does not work when you first plug it
in, do not take it back to the store.
Contact the Swann Helpdesk using our fast e-mail service
[email protected] or call us on one of the Toll-Free
numbers shown on the back cover of this booklet.
Most problems can be quickly and easily fixed with a simple
e-mail or a quick chat with one of our friendly technical staff.
(Toll-Free available in the US and Australia only)
Installation Guide
Wireless Security Kit
Single Channel Digital Security Recorder
Swann Technical Support
All Countries E-mail: [email protected]
Telephone Helpdesk
UNITED STATES toll free
1-800-627-2799
1-877-274-3695
(Su, 2pm-10pm US PT)
USA Exchange & Repairs
562-777-2551
(M-F, 9am-5pm US PT)
AUSTRALIA toll free
1300 138 324
(M 9am-5pm AUS ET)
(Tu-F 1am-5pm AUS ET)
(Sa 1am-9am AUS ET)
New Zealand toll free
0800 479 266
International
+61 3 8412 4610
See http://www.worldtimeserver.com for information on different time zones
and the time in Melbourne Australia compare to your local time.
(M-Th, 6am-10pm US PT)
(F 6am-2pm US PT)
Swann warrants this product against defects in workmanship and material for a
period of one (1) year from it’s original purchase date. You must present your
receipt as proof of date of purchase for warranty validation. Any unit which proves
defective during the stated period will be repaired without charge for parts or
labour or replaced at the sole discretion of Swann. The repair or replacement will
be warranted for either ninety days or the remainder of the original one year
warranty period, whichever is longer. The end user is responsible for all freight
charges incurred to send the to Swann’s repair centres.
shipping from and to any country
other than the country of origin. The warranty does not cover any incidental,
accidental or consequential damages arising from the use of or the inability to use
this . Any costs associated with the fitting or removal of this product by a
tradesman or other person or any other costs associated with its use are the
responsibility of the end user. This warranty applies to the original purchaser of the
only and is not transferrable to any third party.
Unauthorised end user or third party modifications to any component or evidence
of misuse or abuse of the device will render all warranties void.
product The end user is
responsible for all shipping costs incurred when
product
product
Help Desk / Support Details
Warranty Information
www.swannsecurity.com
English
FCC WARNING
STATE MENT
This device complies
with Part 15 of FCC Rules.
Operation is subject to the
following two conditions:
(1) This device may not
cause harmful interference
and
(2) this device must
accept any interference
received, including
interference that may
cause undesired operation
WARNING: IMPORTANT
NOTICE ABOUT CORRECT
USE OF POWER ADAPTER
The correct orientation
for the enclosed power
adapter is in a vertical
or floor mount position.
L’orientation correcte pour
L’adapteur secteur fourni
est dans une position
verticale ou plancher-
monte.
La orientacion correcta para
el adaptador electrico incluido
es en posicion vertical o instalado
en el suelo.
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder ManualRedAlert Digital Video Recorder Manual
Table of Contents
215
Table of Contents
Package Contents
Using the SD Card Slot
Connecting the Camera Power Supply
Changing the Camera Channels
Changing the Wireless Camera Channel on the DVR
Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture)
Motion Detection Setup
Choosing Video or Photo Recording
TV Mode and Picture Quality Settings
Advanced Motion Detection Setup
Viewing and Deleting Saved Images
Changing Folders
Connecting additional wireless cameras
Achieving the best wireless signal
RedAlert Specifications
Wireless Outdoor Camera Specifications
Tips and Troubleshooting
2
2
2
3
3
3
4
4
5-6
7
8-10
11
12
13
13
15
15
13 Wireless Outdoor Camera Specifications
RedAlert DVR Specifications
1 Video Output
1 Video Input
Built in 4 CH Wireless Receiver (DVR records only 1 camera at a time)
Operating Power: 5V DC
Preset to NTSC or PAL Depending on Region (manually adjustable)
16MB internal memory
Output Format - AVI, JPEG
Maximum SD Capacity - 2GB
Recording Format: AVI Video 10s
JPEG images
Recording Resolution: JPEG 640 X 480
AVI 320 X 240
Wireless Channel Frequencies: 2414, 2432, 2450 & 2468MHz
Using the SD Card Slot
Insert an SD card with label facing up into the RedAlert DVR. The DVR can handle SD
cards up to 2GB. Once the card is inserted the DVR will save recordings to the SD card.
You can playback images on a monitor directly from the RedAlert or insert the card into a
card reader on your computer to view recordings. Recordings are saved as AVI for videos
and JPEG for still images.
Package Contents
- RedAlert DVR
- Antenna
- DVR Power Supply
- Instruction Manual
- Easy Setup Guide
- Wireless Outdoor Camera (WOC)
- WOC Power Supply
- SD Card
- Video Out Cable
- Video In Cable
Channels: 2414, 2432, 2450 & 2468MHz
Operating Power: 8/9V DC
Power Consumption: 65-110mA
1 7
Size: 54 x 43mm (2 / ” x 1 / ”)
8 10
Antenna: Omni-directional
Transmitting Range: 20-30m (conditions may limit)
3
Weight: 7 / oz (220 grams)
4
Operating Temperature: 32° - 122°F ~ (0° - 50°C)
Sensor: 1/3”(8.5mm) Color CMOS
Horizontal Resolution: 380 TV lines
Minimum Illumination: 1 Lux@ f1.2
Lens: (5.6mm) 60 degrees
NOTE:
All jurisdictions have specific laws and regulations relating to the use of
cameras. Before using any camera for any purpose, it is the buyer’s
responsibility to be aware of all applicable laws and regulations that prohibit
or limit the use of cameras and to comply with the applicable laws and
regulations.
The legality of watching people other than yourself changes from country to
country and even state to state. Contact your local government's privacy
information body or your local Police for more information on what if any
restrictions you may face.
If onboard memory or SD memory is full, the DVR will automatically overwrite the oldest
images or video first ensuring the DVR keeps recording.
Note: When an SD card is
inserted, an icon appears
showing it is detected by the
RedAlert. All images will now
be recorded to the SD card.
SDSD
SDSD
3
14
Camera Power Adaptor (8V)
Night Hawk Camera with Stand
Troubleshooting Your Wireless Outdoor Camera
Poor Picture:
Realign antennas until image quality improves, slightly adjust the position of the Camera or
Receiver. Change the location of the Camera, or use a different height or angle to see if the
image improves. In some cases interference may be caused by another device on a similar
frequency to the channel you are using.
Lines only - no clear picture:
Check to confirm there is no microwave oven or other 2.4GHz equipment operating close by
ie; Cordless Telephones, Wireless Baby Monitors, Wireless LAN equipment etc . Make sure
the Receiver is on the correct channel.
Picture ghosting or interference:
Some home appliances such as Wireless LANs, 2.4GHz portable telephones and
Microwave ovens operate on or near the 2.4GHz frequency. If you receive interference from
such an appliance, try moving the Camera or Receiver to location further away from the
appliance or in the event of interference from a Wireless LAN device, try changing the
Wireless LAN to a different channel to improve the signal quality.
No picture:
Check the receiver to confirm it is turned ON and make sure the A/V connection of the
Receiver is not plugged into the Audio Out socket. Make sure the Receiver is on the correct
channel. Check to ensure the camera is plugged in and has power. Check that the channel
on the receiver is the set to Channel x.
Red haze over picture:
In some cases where the sun shines into the front of the camera a faint red glow can be
seen. Move the camera to a shaded location, or fit a hood to stop sunlight entering the
camera lens directly.
Foreground is dark while background is too bright:
If the camera is looking from a dark area towards a light area in some cases the automatic
exposure can find it difficult to balance the image correctly. Change the location of the
camera so that the point of greatest interest has the largest area of the image.(if you want to
see the bright area, move the camera so that almost all of the screen shows this area. If you
want to see the darker area, move the camera so that most of the image shows this area.
Fig. (1)
Unscrew front case at the seam
anti-clockwise to remove
Frequency Channel Settings
Connecting the Camera Power Supply
Changing the Camera Channels
Changing the Wireless Camera Channel on Your DVR
To change wireless channels on your DVR, push the SET button on the front casing. The
light indicates the current wireless channel i.e. CH1, CH2, CH3, CH4. Push the display
button (DISP) to change views between your wired and wireless cameras.
Fig. (2)
1 2
1 2
1 2
1 2
Channel 1
Both switches up
2414MHz
Channel 2
Left up & Right down
2432MHz
Channel 3
Left down & Right up
2450MHz
Channel 4
Both switches down
2468MHz
2
1
Front view of lens with switches
in top left, note the numbers 1 &
2 indicated at the bottom of the
switch
Changing these switch settings changes the frequency that
the camera transmits on. Once you have set the channel on
the camera, select the same channel on your RedAlert. If you
experience interference try different channels. Make sure
multiple cameras are set to different frequencies so you can
use them in the same area with the DVR.
RedAlert Digital Video Recorder ManualRedAlert Digital Video Recorder Manual
RedAlert Digital Video Recorder ManualRedAlert Digital Video Recorder Manual
Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture)
The RedAlert DVR can display a wired and wireless camera in PIP mode. Note when
viewing PIP only the main full screen image will be recorded.
To switch cameras and view PIP
1. Press the Display button once to switch camera views between your wired and wireless
cameras.
Tips and Shortcuts
The RedAlert unit has 16MB of memory installed for viewing saved images on your monitor
only. For additional storage an SD card is strongly recommended. The unit will accept
standard SD cards up to 2GB in size.
Transfer your images from the SD card to your computer via a card reader (not included).
Video files are saved as AVI files and photos are saved as JPEG files which can be read by
the most computers.
The DVR can record 1 camera at a time, i.e. 1 wired camera or 1 wireless camera.
If motion detection does not appear to detect your subject, lower the sensitivity or Target
Value as described on page 8 and try expanding the region of motion or bounding box size
as described on page 6.
Use the Up Arrow to quickly turn motion detection on or off when viewing a live image.
Use the Down Arrow to switch between photo and video recording when viewing a live
image.
Consult the Easy Setup Guide for information on camera connections.
For assistance with this product contact Swann Technical Support on 1-800-627-2799 in
USA or 1300 13 8324 in Australia. Alternatively, email us at [email protected]
2. Press the Display button again to view both cameras in PIP mode.
3. Press the Display button again to swap camera views.
Motion Detection Setup
1. Press the Menu button to enter menu interface.
2. Press Left/Right to highlight the Motion Detection On/Off option.
RedAlert Digital Video Recorder Manual
413
Connecting additional wireless cameras
The RedAlert DVR is capable of receiving up to 4 wireless cameras. Note only the
displayed camera can be recorded. The DVR operates on the following frequencies: CH1 -
2414MHz, CH2 - 2432MHz, CH3 - 2450MHz, CH4 - 2468MHz.
Push the Set button on the front of the RedAlert to change wireless camera channels. The
light indicators show the active wireless channel. Push the display button (DISP) to switch
between wired and wireless camera mode.
Achieving the best wireless signal
Depending on local conditions wireless signals may vary. A clear line of sight from the DVR
to the camera will achieve the best image. Walls, metals and other wireless devices may
impact the quality of an image. If too much interference occurs on any channel, move the
camera or DVR to another location or change camera channels.
3. Press OK to toggle Motion Detection ON or OFF.
4. Press Left/Right to highlight the desired option (Delete One, Delete All, Format, Exit)
and then press OK to confirm the selection.
5. Press Left/Right to select Confirm (check) or Cancel (X) option, and then press OK to
select.
4. Press the Left/Right buttons to highlight Exit and then press OK to exit the menu.
SHORTCUT: When viewing your camera press the UP arrow to quickly toggle Motion
Detection ON/OFF.
Choosing Video or Photo Recording
1. Press the Menu button to enter menu interface.
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual
5
12
Changing Folders
1. While in playback mode press the Display button to bring up the folder listing.
2. Press Up/Down to choose the folder you want to see, and then press OK to confirm.
5. Press Mode to exit playback and return to live view.
2. Press the Left/Right buttons to highlight Capture Format Photo/AVI (Video). 11. Press Left/Right to highlight the Exit option and then press OK to return menu
interface.
SHORTCUT: To exit or go to previous menus press the Menu button on the DVR
3. To delete an image, in playback mode press Menu to bring up the delete menu.
Viewing and Deleting Saved Images
1. When viewing a live image press Mode to enter playback mode and view saved images.
3. Press OK to toggle Photo or AVI (video) recording.
4. Press the Left/Right buttons to highlight Exit and then press OK to exit the menu.
SHORTCUT: When viewing your camera press the DOWN arrow to quickly toggle between
Photo or Video.
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual
6 11
2. Press Left/Right to switch between images.
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual
TV Mode and Picture Quality Settings
1. Press the Menu button to enter menu interface.
2. Press Left/Right to highlight Setup and then press OK.
8. Press Left/Right in the Setup menu and highlight Motion Detect Sensitivity and press
OK.
9. This screen shows the bounding box where motion will be detected.
Current Value is the level of motion that is currently being detected on a scale of 0~99
where 0 is no motion and 99 is the highest level of motion.
Target Value is the level of motion required to set off motion detection. For motion to be
detected the Current Value must be higher than the Target Value.
10. Press Left/Right to set the Target Value (or sensitivity) between 0~99. Adjust the
sensitivity to the level needed for your conditions. Press OK to return to the Setup menu.
Note: In our example above, Target Value is set to 10. Motion will only be recorded when the level of motion (Current
Value) in the bounding box reaches 10 or more.
3. Press OK to toggle TV mode from PAL/NTSC.
NOTE: The default setting is NTSC in North America and PAL for Europe/Australasia
4. Press Left/Right to highlight the picture Quality option.
7
10
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual
Advanced Motion Detection Setup
1. From the Setup menu, press the Left/Right buttons to highlight Motion Detection Area
and press OK.
2. Press Left/Right to change the size of the area of detection (Large, Medium or Small
Box) and then press OK. Motion will be detected only within the box selected.
3. Press Up/Down/Left/Right to move detection box to a region you would like to detect
motion and then press OK to confirm and return to the Setup menu.
5. Press OK to change the Motion Detect Count. This value can be set to 1, 3 or 5 photos
taken per motion detection event.
6. Next, press Left/Right to highlight Motion Detect Interval. This setting indicates the
pause in seconds between two separate motion events.
7. Press OK to change the pause or delay to 1, 3 or 5 seconds between motion events.
4. Press Left/Right to highlight Motion Detect Count in the Setup menu. Motion Detect
Count indicates how many photos will be taken per motion detection.
Note: This feature applies to photo recording only
89
5. Press OK to toggle High/Low image quality. If you are trying to conserve memory space
use Low otherwise the High setting is recommended.
Autres manuels pour RedAlert Single Channel Digital Security...
2
Autres manuels Swann Système de sécurité
Swann
Swann SecuraView Manuel utilisateur
Swann
Swann ADW-340 Manuel utilisateur
Swann
Swann HD Pro-Series Manuel utilisateur
Swann
Swann DVR4-8600 Manuel utilisateur
Swann
Swann GuardianEye Manuel utilisateur
Swann
Swann DVR8-4200 Manuel utilisateur
Swann
Swann Digital EagleEye ADW-400 Manuel utilisateur
Swann
Swann NIGHTHAWK 3-Feb Guide de démarrage rapide
Swann
Swann ADW-340 Manuel utilisateur
Swann
Swann RedAlert SW242-WDW Manuel utilisateur
Swann
Swann RedAlert SW244-WDW Manuel utilisateur
Swann
Swann DVR9-4200 Manuel utilisateur
Swann
Swann PRO-640 Manuel utilisateur
Swann
Swann SW276-ASL Manuel utilisateur
Swann
Swann DVR4-4550 Manuel utilisateur
Swann
Swann DVR4-2550 Manuel utilisateur
Swann
Swann NightHawk Twin Pack SW233-WX2 Manuel utilisateur
Swann
Swann SW351-WSA Manuel utilisateur
Swann
Swann PRO-681 Manuel utilisateur
Swann
Swann One Manuel utilisateur
Manuels Système de sécurité populaires d'autres marques
Blaupunkt
Blaupunkt SA 2700 Manuel utilisateur
IDEAL
IDEAL Accenta Manuel du propriétaire
AJAX
AJAX DoubleButton Manuel utilisateur
Ecolink
Ecolink Siren+Chime Manuel utilisateur
Digital Monitoring Products
Digital Monitoring Products XR150 Manuel utilisateur
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur
DSC
DSC PC 4010 Manuel du propriétaire