SUNLU SL Series Manuel
文件编号：3D打印机013B说明书 尺寸：210*148mm（双面印刷） 材质：128克铜版纸
Guide Book
TM
SHSH Series 3D Printer
Guide Book
【To make Top-quality 3D Printer】
This guide book is based on 3D printer model SL-0113B.
It is also applicable for SL-012B、SL-014B and SL-015B.
Please check SD memory card for detailed instruction、
tutorial video and Cura software.
SL Series 3D Printer Guide
Dear Value Customers:
Thank you for choosing our products. For the best experience, please read the instructions carefully before operating the
printer. Our 3D teams are always ready to provide you with assistance. Please contact us via the phone number or e-mail
address provided at the end when you meet any problems while using our printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1.View the accompanied instructions and videos on the SD card.
2.Visit our official website at www.sunlugw.com You will find relevant software/hardware information,contact details and
operation and maintenance instructions on the website.
Notes
Keep hands away from the nozzle or heating bed during printing. Preventing from burns.
Do not use any other power cables except the one supplied. Use a grounded three-prong power outlet.
Do not reach to printing area while printer is working in case of personal injury.
Shut down the power source in any emergent cases.
The Filaments recommended by the manufacturer are preferred as to avoid clogging in the extrusion head or Printer damage.
Printer works at violent vibration or any unstable places may cause poor printing quality.
Clean the Printer frequently. Usually clean it while power-off, clean the body of the machine with a cleaner or alcohol to clean
the platform su rface before every print.
Machine works unattended is not recommended.
01
Contents
1.Parameters
2. General List
3. Device Installation
4. Filament Support Installation
5. Power Switch Examination
6. Screen/Knob Information
7. Filament Loading
8. Bed Leveling
9. Software Installation
10. Software Parameter Settings
11. Operational Demonstration
12. Troubleshooting
............................................................................... 3
............................................................................... 4
..................................................................... 5
.................................................. 6
...................................................... 7
........................................................ 8
.................................................................... 10
............................................................................. 11
............................................................... 12
................................................. 13
................................................... 14
...................................................................... 16
02
1.Parameters
Print Principle
Print Size
Print Accuracy
Nozzle QTY
Nozzle Diameter
Print Speed
Recommended Filament
Nozzle Max Temp
Heating Bed
Software
Input Format
Output Format
Connecting
Power Parameter
Machine Size
Net Weight
FDM
310×310×400(mm)
±0.01mm
Single Nozzle
Equipped with 0.4mm、0.3mm & 0.2mm (Optional)
20-100mm/s(Recommended: 50mm/s)
1.75mm PLA, ABS, PETG, HIPS,WOOD, PLA Carbon Fiber
260℃
Yes
Cura
STL .OBJ .AMF
Gcode
TF Card、USB
115V/230V AC,50/60HZ
600×490×640（mm）
12KG
03
2.General List
1. X Limit Switch 4. Controlling Box 7. Display 10. Z Stepper 13. Extruding Motor
2. Nozzle Kit 5. TF Slot and USB Port 8. Base Frame 11. Power Switch 14. Filament Support
3. Platform 6. Controlling Knob 9. Gantry Frame 12. Voltage Switch 15. X Stepper
1
2
3
4 5 6 7 8
9
10 11 12 13 14
15
04
05
3.Device Installation
Step1：Unwrap the machine and cut off the cable tie.（Pic 1）;
Step2：Put the square-shaped nuts into the slots of each side of gantry frame(Pic 2&Pic 3). Put up gantry frame and
make M5*8 screw through T-shaped fixing block with the nuts of each side of gantry frame(Pic 4).
Step3: Put down gantry frame like(Pic 5) and install 4 pcs of M5*25 bolts connecting base frame
and gantry frame. Finally screw M5*8 bolts tightly(Pic 6).
Pic1 Pic2 Pic3
Pic4 Pic5 Pic6
Pic2
06
4.Filament Support Installation
Step1：Filament support spare parts shows in Pic 7.
Step2：Unwrap the support and put the M3 nuts into the slots which is circled(Pic 8).
Then connect with other two bigger boards with M3 screws(Pic 9 & Pic 10).
Step3：Load filament like Pic 11 and make sure the filament always loading from upside like Pic 12.
Pic7 Pic8 Pic9
Pic10 Pic11 Pic12
07
5.Power Switch Examination
Step1：Select the correct input voltage to match your local mains (230V or 115V)(Pic 13，Pic 14)
Damage can occur if voltage is set incorrectly.
Pic13 Pic14
Voltage Switch
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels SUNLU Imprimante 3D
