Subaru 2001 Forester Manuel utilisateur
This service manual has been prepared
to provide SUBARU service personnel
with the necessary information and data
for the correct maintenance and repair of
SUBARU vehicles.
This manual includes the procedures for
maintenance, disassembling, reassem-
bling, inspection and adjustment of com-
ponents and diagnostics for guidance of
experienced mechanics.
Please peruse and utilize this manual
fully to ensure complete repair work for
satisfying our customers by keeping their
vehicle in optimum condition. When
replacement of parts during repair work is
needed, be sure to use SUBARU genu-
ine parts.
All information, illustration and specifica-
tions contained in this manual are based
on the latest product information avail-
able at the time of publication approval.
FUJI HEAVY INDUSTRIES LTD.
2001 FORESTER SERVICE MANUAL QUICK REFERENCE INDEX
BODY SECTION
G8050GE6
INSTRUMENTATION/DRIVER INFO IDI
Page
1. General Description.....................................................................................2
2. Combination Meter System.........................................................................4
3. Combination Meter Assembly ...................................................................15
4. Speedometer.............................................................................................17
5. Tachometer................................................................................................18
6. Fuel Gauge................................................................................................19
7. Water Temperature Gauge........................................................................20
8. Ambient Sensor.........................................................................................21
1. General Description S907001
A: SPECIFICATIONS S907001E49
Combination meter
Speedometer Electric pulse type
Temperature gauge Thermistor cross coil type
Fuel gauge Resistance cross coil type
Tachometer Electric impulse type
Turn signal indicator light 14 V —1.4 W
Charge indicator light 14 V —1.4 W
Oil pressure indicator light 14 V —1.4 W
ABS warning light 14 V —1.4 W
CHECK ENGINE warning light
(Malfunction indicator light) 14 V —1.4 W
HI-beam indicator light 14 V —1.4 W
Door open warning light LED
Seat belt warning light 14 V —1.4 W
Brake fluid and parking brake warning light 14 V —1.4 W
FWD indicator light 14 V —1.4 W
AIRBAG warning light 14 V —1.4 W
Meter illumination light 14 V —3 W, 1.4 W
AT OIL TEMP. warning light 14 V —1.4 W
LO indicator light 14 V —1.4 W
HOLD indicator light 14 V —1.4 W
POWER indicator light 14 V —1.4 W
Rear differential oil temperature warning light 14 V —1.4 W
Immobilizer indicator light LED
Low fuel warning light 14 V —1.4 W
LCD back light 14 V —1.4 W
IDI-2
GENERAL DESCRIPTION
Instrumentation/Driver Info
B: CAUTION S907001A03
쐌Be careful not to damage meters and instrument panel.
쐌Be careful not to damage meter glasses.
쐌Make sure that electrical connector is connected securely.
쐌After installation, make sure that each meter operates normally.
쐌Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.
쐌Do not apply excessive force to circuit plate.
쐌Do not drop or otherwise apply impact.
C: PREPARATION TOOL S907001A17
1. GENERAL TOOLS S907001A1701
TOOL NAME REMARKS
Circuit Tester Used for measuring resistance and voltage.
IDI-3
GENERAL DESCRIPTION Instrumentation/Driver Info
2. Combination Meter System S907607
A: SCHEMATIC S907607A21
1. COMBINATION METER S907607A2101
SG6420A
IDI-4
COMBINATION METER SYSTEM
Instrumentation/Driver Info
2. OUTSIDE TEMPERATURE INDICATOR LHD MODEL S907607A2103
SL96-20
IDI-5
COMBINATION METER SYSTEM Instrumentation/Driver Info
3. OUTSIDE TEMPERATURE INDICATOR RHD MODEL S907607A2104
SR96-20
IDI-6
COMBINATION METER SYSTEM
Instrumentation/Driver Info
B: INSPECTION S907607A10
CAUTION:
When measuring voltage and resistance of the ECM, TCM, or each sensor, use a tapered pin with
a diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Do not insert the pin more
than 2 mm (0.08 in).
1. SYMPTOM CHART S907607A1007
Symptom Repair order Reference
Combination meter assembly does not operate. (1) Power supply
(2) Ground circuit <Ref. to IDI-8 CHECK
POWER SUPPLY AND
GROUND CIRCUIT,
INSPECTION, Combina-
tion Meter System.>
Speedometer does not operate. (1) (MT) Vehicle speed sensor
(AT) Transmission control module
(2) Harness
(3) Speedometer
MT: <Ref. to IDI-9
CHECK VEHICLE
SPEED SENSOR,
INSPECTION, Combina-
tion Meter System.>
AT: <Ref. to IDI-10
CHECK TRANSMIS-
SION CONTROL
MODULE,
INSPECTION, Combina-
tion Meter System.>
Tachometer does not operate. (1) Engine control module
(2) Harness
(3) Tachometer
<Ref. to IDI-11 CHECK
ENGINE CONTROL
MODULE,
INSPECTION, Combina-
tion Meter System.>
Fuel gauge does not operate. (1) Fuel level sensor
(2) Harness
(3) Fuel gauge
<Ref. to IDI-12 CHECK
FUEL LEVEL SENSOR,
INSPECTION, Combina-
tion Meter System.>
Water temperature gauge does not operate. (1) Engine coolant temperature sensor
(2) Harness
(3) Water temperature gauge
<Ref. to IDI-13 CHECK
ENGINE COOLANT
TEMPERATURE
SENSOR,
INSPECTION, Combina-
tion Meter System.>
Outside temperature indicator does not operate. (1) Ambient sensor
(2) Harness
(3) Combination meter
<Ref. to IDI-14 CHECK
OUTSIDE TEMPERA-
TURE INDICATOR,
INSPECTION, Combina-
tion Meter System.>
IDI-7
COMBINATION METER SYSTEM Instrumentation/Driver Info
2. CHECK POWER SUPPLY AND
GROUND CIRCUIT S907607A1001
No. Step Check Yes No
1 CHECK POWER SUPPLY FOR COMBINA-
TION METER.
1) Remove combination meter. <Ref. to IDI-15
REMOVAL, Combination Meter Assembly.>
2) Disconnect combination meter harness
connector.
3) Turn ignition switch to ON.
4) Measure voltage between combination
meter connector (i10) and chassis ground.
Connector & terminal
(i10) No. 1 (+) —Chassis ground (−):
Is the voltage more than 10
V? Go to step 2. Check harness for
open or short
between fuse and
combination
meter.
2 CHECK POWER SUPPLY FOR COMBINA-
TION METER.
Measure voltage between combination meter
connector (i10) and chassis ground.
Connector & terminal
(i10) No. 2 (+) —Chassis ground (−):
Is the voltage more than 10
V? Go to step 3. Check harness for
open or short
between ignition
relay and combi-
nation meter.
3 CHECK GROUND CIRCUIT OF COMBINA-
TION METER.
1) Turn ignition switch to OFF.
2) Measure resistance of harness between
combination meter connector (i10) and chas-
sis ground.
Connector & terminal
(i10) No. 3 (+) —Chassis ground (−):
Is the resistance less than
10 Ω?Replace combina-
tion meter printed
circuit.
Repair wiring har-
ness.
IDI-8
COMBINATION METER SYSTEM
Instrumentation/Driver Info
3. CHECK VEHICLE SPEED SENSOR
S907607A1002
No. Step Check Yes No
1 CHECK VEHICLE SPEED SENSOR.
1) Set the vehicle on a free roller, or lift-up the
vehicle and support it with safety stands.
2) Remove the combination meter with har-
ness connector.
WARNING:
Be careful not to get caught in the running
wheels.
3) Drive the vehicle at a speed greater than
20 km/h (12 MPH).
4) Measure voltage between combination
meter connector (i10) and chassis ground.
Connector & terminal
(i10) No. 7 (+) —Chassis ground (−):
Is the voltage less than 1 V
←→ more than 4? Check speedom-
eter. <Ref. to
IDI-17 REMOVAL,
Speedometer.>
Go to step 2.
2 CHECK VEHICLE SPEED SENSOR POWER
SUPPLY.
1) Turn ignition switch to OFF.
2) Disconnect vehicle speed sensor harness
connector.
3) Turn ignition switch to ON.
4) Measure voltage between vehicle speed
sensor connector (B17) and engine ground.
Connector & terminal
(B17) No. 3 (+) —Engine ground (−):
Is the voltage more than 10
V? Go to step 3. Check harness for
open or short
between ignition
relay and vehicle
speed sensor.
3 CHECK HARNESS BETWEEN VEHICLE
SPEED SENSOR AND ENGINE GROUND.
1) Turn ignition switch to OFF.
2) Measure resistance between vehicle speed
sensor connector (B17) and engine ground.
Connector & terminal
(B17) No. 2 (+) —Engine ground (−):
Is the resistance less than
10 Ω?Go to step 4. Repair wiring har-
ness.
4 CHECK HARNESS BETWEEN VEHICLE
SPEED SENSOR AND COMBINATION
METER.
1) Disconnect connector from combination
meter.
2) Measure resistance between vehicle speed
sensor harness connector and combination
meter harness connector.
Connector & terminal
(B17) No. 1 —(i10) No. 7:
Is the resistance less than
10 Ω?Replace vehicle
speed sensor. Repair wiring har-
ness.
IDI-9
COMBINATION METER SYSTEM Instrumentation/Driver Info
Autres manuels pour 2001 Forester
23
Table des matières
Autres manuels Subaru Automobile
Subaru
Subaru 2004 Forester Manuel utilisateur
Subaru
Subaru Impreza WRX 2012 Manuel utilisateur
Subaru
Subaru Ascent 2023 Manuel utilisateur
Subaru
Subaru 2006 outback Manuel utilisateur
Subaru
Subaru Forester 2018 Manuel utilisateur
Subaru
Subaru 2017 Legacy Manuel utilisateur
Subaru
Subaru IMPREZA GD 2007 Series Manuel utilisateur
Subaru
Subaru 2002 Impreza Manuel utilisateur
Subaru
Subaru 1998 Legacy Manuel utilisateur
Subaru
Subaru 2011 Forester Manuel utilisateur
Subaru
Subaru Forester 1999 Manuel utilisateur
Subaru
Subaru 2012 Forester Manuel utilisateur
Subaru
Subaru 2011 Tribeca Manuel utilisateur
Subaru
Subaru Impreza 2016 Manuel utilisateur
Subaru
Subaru 2005 Legacy Manuel utilisateur
Subaru
Subaru 2014 XV Crosstrek Manuel utilisateur
Subaru
Subaru XV Crosstrek Manuel utilisateur
Subaru
Subaru 2001 IMPREZA Manuel utilisateur
Subaru
Subaru Impreza 2016 Manuel utilisateur
Subaru
Subaru 2008 OUTBACK Manuel utilisateur
