StarTech.com SV431DPUA2 Manuel utilisateur

Manual Revision: 05/23/2019

User Manual

For the latest information and specications visit

www.startech.com/SV431DPUA2

4-Port USB KVM Switch | DisplayPort | 4K 60Hz

Actual product may vary from photos

SKU#: SV431DPUA2

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Compliance Statements

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other

Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and

other protected names and/or symbols of third-party companies not related in

any way to StarTech.com. Where they occur these references are for illustrative

purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual

applies by the third-party company in question. Regardless of any direct

acknowledgement elsewhere in the body of this document, StarTech.com

hereby acknowledges that all trademarks, registered trademarks, service marks,

and other protected names and/or symbols contained in this manual and

related documents are the property of their respective holders.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Safety Statements

Safety Measures

• Wiring terminations should not be made with the product and/or electric

lines under power.

• Cables (including power and charging cables) should be placed and routed

to avoid creating electric, tripping or safety hazards.

Mesures de sécurité

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit

et/ou les câbles électriques sont sous tension.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent

être placés et acheminés de façon à éviter tout risque électrique, de chute ou

de sécurité

安全対策

• 電源が入っている状態の製品または電線の終端処理を行わないでくださ

い。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回し

を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう

にしてください。

Misure di sicurezza

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le

linee elettriche sotto tensione.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati

e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o

pericoli per la sicurezza.

Säkerhetsåtgärder

• Montering av kabelavslutningar får inte göras när produkten och/eller

elledningarna är strömförda.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så

sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Table of Contents

Compliance Statements........................................................................1

Safety Statements..................................................................................2

Product Diagram....................................................................................5

Front View.................................................................................................................................................... 5

Rear View...................................................................................................................................................... 6

Product Information..............................................................................7

Package contents...................................................................................................................................... 7

Requirements ............................................................................................................................................. 7

Installation ..............................................................................................8

Setting Up a PC .......................................................................................................................................... 8

Connecting a Console to the KVM Switch........................................................................................8

Connecting a Computer to the KVM Switch ................................................................................... 9

Operation ................................................................................................10

Selecting a Computer.............................................................................................................................. 10

Starting an Auto Scan.............................................................................................................................. 10

Setting Scan Time Duration................................................................................................................... 11

Using hotkey Commands......................................................................12

Disabling hotkey Commands ............................................................................................................... 12

Selecting a Computer.............................................................................................................................. 13

Starting an Auto Scan.............................................................................................................................. 13

Setting Scan Time Duration................................................................................................................... 13

Scanning Computers Manually............................................................................................................ 13

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Disabling the Audio Stick Feature....................................................................................................... 14

Using an Alternative hotkey Command............................................................................................ 15

About the LED indicators......................................................................15

Troubleshooting.....................................................................................16

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Diagram

Front View

1Port Selection/Link LEDs

2Power LED

3Port Select Buttons

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Rear View

1Console DisplayPort Port 6PC 4 Ports

2Power Adapter Port 7PC 3 Ports

3Console Speaker and Mic

Ports

8PC 2 Ports

4USB Keyboard and Mouse

Ports

9PC 1 Ports

5Console USB Ports

234567 8 9

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Product Information

Package contents

• KVM Switch x 1

• Foot Pads x 4

• Universal Power Adapter (NA/JP, EU, UK, ANZ) x 1

• Quick-Start Guide x 1

Requirements

Requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/SV431DPUA2.

Cables

• USB-A to USB-cable or USB-C to USB-B cable’

• 3.5 mm audio cables

• Computer system or video card enabled with DisplayPort

• Computer system enabled with USB

Components

• Display device (for example, monitor, projector, TV, and so

on) enabled with DisplayPort

• Standard wired or wireless USB keyboard

• Standard wired or wireless USB mouse

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Installation

Setting Up a PC

The following setup changes are required for PC users and

aren’t necessary if you’re using a mac.

1. In Standard CMOS, set Halt on Error to All But Keyboard.

2. In PNP and PCI Setup, set PNP OS Installed to Yes .

3. In PNP and PCI Setup, set USB IRQ to Enabled.

Connecting a Console to the KVM Switch

1. Turn o your computer and any devices or peripherals that

are connected to it (for example, printers, external hard

drives, and so on).

2. Connect a monitor or display to the console DisplayPort

port.

3. Do one of the following:

• Connect a keyboard and a mouse to the USB keyboard and

mouse ports.

• If you’re using a combination wireless keyboard and

mouse, connect the wireless receiver to the keyboard port.

4. If necessary, do any of the following:

• Connect speakers to the console audio speaker port.

• Connect a microphone to the console mic port.

• Connect USB peripherals to the USB hub ports.

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Connecting a Computer to the KVM Switch

You can connect up to four computers to the KVM switch.

1. Turn o the computers that you want to connect to the KVM

switch and any devices or peripherals that are connected to

the computers (for example, printers, external hard drives,

and so on).

2. Connect a DisplayPort video cable to the DisplayPort port on

your computer and to one of the PC DisplayPort ports on the

KVM switch.

3. Connect a USB cable to the USB port on the computer and to

the PC USB port on the KVM switch

4. If you’re using audio, connect speakers and/or a microphone

to the PC audio speaker and mic ports on the KVM switch.

5. To connect additional computers, repeat steps 1 to 4.

6. If you want to share USB peripherals between connected

computers or devices, connect the peripherals to the USB

hub ports on the KVM switch.

7. Connect the universal power adapter to a power source and

to the power adapter port on the KVM switch. The power

LED should illuminate.

8. Turn on any devices or peripherals that are connected to

the computer, and then turn on the connected computer.

Wait for the computer to nishing loading and then test the

functionality of the keyboard and mouse of the connected

computer.

Autres manuels pour SV431DPUA2

Table des matières

Autres manuels StarTech.com Changer

StarTech.com

StarTech.com SV211 Manuel utilisateur

StarTech.com

StarTech.com STARVIEW SV231DDUSB Manuel utilisateur

StarTech.com

StarTech.com SV231USBA Manuel utilisateur

StarTech.com

StarTech.com STARVIEW SV215MICUSBA Manuel utilisateur

StarTech.com

StarTech.com ST7300U3M Manuel utilisateur

StarTech.com

StarTech.com 5G7AIBS-USB-HUB-NA Manuel utilisateur

StarTech.com

StarTech.com ICUSB23216FD Manuel utilisateur

StarTech.com

StarTech.com POEINJ4G Manuel utilisateur

StarTech.com

StarTech.com SV441HDIE Manuel utilisateur

StarTech.com

StarTech.com IES101G2SFPW Manuel utilisateur

StarTech.com

StarTech.com HB30C3A1CST Manuel utilisateur

StarTech.com

StarTech.com 35BAYFWUSB Manuel

StarTech.com

StarTech.com SV441DUSBI Manuel utilisateur

StarTech.com

StarTech.com ST124WGB Manuel utilisateur

StarTech.com

StarTech.com VS221HDQ Manuel utilisateur

StarTech.com

StarTech.com ICUSB2321X Manuel utilisateur

StarTech.com

StarTech.com STARVIEW SV1631DUSB Manuel utilisateur

StarTech.com

StarTech.com VS221VGA2HD Manuel utilisateur

StarTech.com

StarTech.com SV231DPU Manuel utilisateur

StarTech.com

StarTech.com SV231DDVDUA Manuel utilisateur

StarTech.com

StarTech.com C2-D46-UC2-CBL-KVM Manuel utilisateur

StarTech.com

StarTech.com SV211USB Manuel utilisateur

StarTech.com

StarTech.com VS221HD20 Manuel utilisateur

StarTech.com

StarTech.com VS421HDDP Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur