StarTech.com ST222MX Manuel utilisateur

Manual Revision: 02/23/2012

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

ST222MX

ST222MXGB

ST224MX

ST228MX

2x2/4/8 High Resolution Matrix VGA

Video Switch

*actual product may vary from photos

Instruction Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use ofTrademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction Manual

Table of Contents

Introduction............................................................................................1

Features ........................................................................................................................................................ 1

Package Contents ..................................................................................................................................... 1

Installation ..............................................................................................2

Operation for Cascade............................................................................................................................. 2

Input/Output Signal Specications.................................................................................................... 3

Specications..........................................................................................4

Technical Support ..................................................................................5

Warranty Information............................................................................5

Instruction Manual

Introduction

Thank you for purchasing a StarTech.com Dual Input VGA Matrix Video Splitter for your

desktop computer or workstation. The ST222MX, ST224MX and ST228MX oer the

highest quality video on multiple monitor hookups. The Matrix Video Splitter allows

you to connect two, four or eight monitors to two or more computers and switch

the video signals to any desired monitor. The Matrix Video Splitter is ideal for Public

Video broadcast systems, demos and presentations, in-store product merchandising,

information kiosks, and nancial institutions

Features

• Allows two computers to display dierent images on various monitors

• Works with VGA, SVGA, XGA and Multisync monitors

•

Provides a resolution of up to 1920 x 1440 pixels with its high video bandwidth (250 Mhz)

• Uses standard monitor extension cables (StarTech.com coaxial VGA cables

recommended for best picture quality)

• Extends the video signal up to 213 ft. (65 m.) from your computer

• Able to daisy chain multiple monitor hookups

• Backed by StarTech.com’s one-year warranty

Package Contents

• 1x 2x2 VGA Matrix Switch

• 1x Power Adapter

• 1x Instruction Manual

Instruction Manual

Installation

1. Turn o the power to the computers and monitors.

2. Connect a HD-15 video extension cable between the VGA cards of the computers

and the “Video In” ports on the back of the Matrix Video splitter.

3. Connect the HD-15 video extension cables from the monitors and plug them into

the “Video Out 1” and “Video Out 2”ports on the back of the splitter.

4. Turn on the computers and the monitors.

5. Connect the input power jack to the back of the matrix video splitter and plug the

power adapter into the wall or power bar.

6. Use the SELECT buttons on the front of the splitter to obtain the image either from

7. PC “A” ( the Linked LED “A” light displays in green) or from PC“B” ( the Linked LED “B”

light displays in red).

8. If the Linked LED “A” or Linked LED “B” does not display any color then the splitter

has been switched o.

NOTE:

• All the “Video Out” ports will connect with the “Video In” port of PC A whileturning

on the matrix video splitter

• If you install the DDC monitor for the matrix video splitter, the rest of the monitors

must be the same resolution as the DDC monitor.

• Through the functionality of the DDC monitor, the “Video In” port of A will connect

with the “Video Out” on port 1 and the “Video In” port of B will connect with the

“Video Out” on port 2.

• Available monitors include the VGA, SVGA, XGA, Multisync, and exclude the CGA,

EGA, and MonoChrome.

Operation for Cascade

If you need to add more monitors, you need to attach an additional matrix video

splitter box.

1. Connect a HD-15 male/male video extension cable from the “Video Out 1” port of

the rst Matrix Video splitter box to the “Video In” port of your second matrix video.

2. Connect the input power jack to the back of the Matrix Video splitter and plug the

power adapter into the wall or power bar.

NOTE: Even though you can cascade the splitters, the image might become unstable if

you cascade too many tiers of video splitters.

Instruction Manual

Input/Output Signal Specications

Pin# Signal

1Red Video

2Green Video

3Blue Video

4ID2*

5Ground

6Analog Ground

7Analog Ground

8Analog Ground

9NC

10 Ground

11 ID0*

12 ID1*

13 Horizontal Sync

14 Vertical Sync

15 ID3*

*For video out port 1 and 2

Instruction Manual

Specications

Max Resolution 1920 x 1440 (60Mhz)

Pixel Frequency 250 Mhz

Cable Distance (Device to Monitor) 65m (213’) Maximum

Signal Type VGA, SVGA, XGA, Multisync

Power Adapter (Min) AC 7.5V (800mA)

Housing Metal

Standards DVI 1.0 by DDWG

Safety Standards FCC and CE Mark

Instruction Manual

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to

provide industry-leading solutions. If you ever need help with your product, visit

www.startech.com/support and access our comprehensive selection of online tools,

documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only.

StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their

ocers, directors, employees or agents) for any damages (whether direct or indirect,

special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,

or any pecuniary loss, arising out of or related to the use of the product exceed the

actual price paid for the product. Some states do not allow the exclusion or limitation

of incidental or consequential damages. If such laws apply, the limitations or exclusions

contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.

StarTech.com is your one-stop source for every connectivity part you need. From

the latest technology to legacy products — and all the parts that bridge the old and

new — we can help you nd the parts that connect your solutions.

We make it easy to locate the parts, and we quickly deliver them wherever they need

to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to

the products you need in no time.

Visit www.startech.com for complete information on all StarTech.com products and

to access exclusive resources and time-saving tools.

StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology

parts. StarTech.com was founded in 1985 and has operations in the United States,

Canada, the United Kingdom and Taiwan servicing a worldwide market.

Autres manuels pour ST222MX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels StarTech.com Changer

StarTech.com

StarTech.com SV231UAF Manuel utilisateur

StarTech.com

StarTech.com VS221HD4KA Manuel utilisateur

StarTech.com

StarTech.com IESC1G50UP Manuel utilisateur

StarTech.com

StarTech.com DuraView RACKCONS1708 Manuel utilisateur

StarTech.com

StarTech.com SV431HDU3A2 Manuel utilisateur

StarTech.com

StarTech.com HB30A3A1CST Manuel utilisateur

StarTech.com

StarTech.com SV231HU34K6 Manuel utilisateur

StarTech.com

StarTech.com SV211HDUC Manuel utilisateur

StarTech.com

StarTech.com SV231DPDDUA2 Manuel utilisateur

StarTech.com

StarTech.com SV431DVGAU2A Manuel utilisateur

StarTech.com

StarTech.com MSTDP124DP Manuel utilisateur

StarTech.com

StarTech.com SV231DVGAU2A Manuel utilisateur

StarTech.com

StarTech.com ICUSB23208FD Manuel utilisateur

StarTech.com

StarTech.com IES81000POE Manuel utilisateur

StarTech.com

StarTech.com 8STIES51000POE Manuel utilisateur

StarTech.com

StarTech.com STARVIEW SV431DVIUAHR Manuel utilisateur

StarTech.com

StarTech.com DisplayPort SV231QDPU34K Manuel utilisateur

StarTech.com

StarTech.com ES3116 Manuel utilisateur

StarTech.com

StarTech.com HB30AM4AB Manuel utilisateur

StarTech.com

StarTech.com HB20A7AME Manuel utilisateur

StarTech.com

StarTech.com ST4300USB3 Manuel utilisateur

StarTech.com

StarTech.com 8STSV431HDU3A2 Manuel utilisateur

StarTech.com

StarTech.com C2-D46-UC2-CBL-KVM Manuel utilisateur

StarTech.com

StarTech.com ST4300PBU3 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur